Ghost Controls Gate Repair in Irving, CA | Ironworks Gate Co.
We provide independent Ghost Controls gate repair across Irving, TX and its 75060-75063 ZIP codes, with same-day response for most calls and OEM-compatible parts stocked for the TSS1, TSS2, and AG2 model lines. What sets our work apart here is how we pair Ghost Controls automation expertise with deep knowledge of Irving’s specific headaches: expansive black clay that heaves posts out of plumb, HOA-mandated ornamental iron specs that demand exact-match replacement panels, and afternoon thunderstorms that fry control boards across the Las Colinas and Valley Ranch corridors. Call (833) 754-7503 for a free estimate.
Why Irving Residents Choose Us for Ghost Controls Service
Victor Salinas grew up in Boyle Heights watching a neighbor weld wrought-iron gates, then trained in welding and metal fabrication at Los Angeles Trade-Technical College before spending years working gates and operators across the LA basin. That foundation still shapes how Ironworks approaches every job four decades later. We look at the problem honestly and tell you what it actually needs.
We’ve rebuilt over 70 Ghost Controls units in Irving’s Valley Ranch and Las Colinas corridors over the past four years through our Gate Repair in Irving. That volume matters because Ghost Controls operators use proprietary CAN-bus wiring and automatic close timers that differ from LiftMaster or Mighty Mule systems. A technician who sees one Ghost Controls job a month will spend half the visit reading manuals. Our techs have the TSS1 timer sequences memorized and carry the right boards in the truck.
We’re not affiliated with Ghost Controls. We’re independent. That means we source OEM-compatible parts directly and choose the fix that serves your gate, not a manufacturer’s warranty program. Our Ghost Controls sales & service covers everything from control board replacement to full operator swaps, with the 90-Day Done Right Promise on every job. If it’s not right, we come back and make it right. No paperwork, no arguing.
Common Ghost Controls Gate Repair Problems We Solve in Irving
- Control board failure after thunderstorms. Ghost Controls boards are sensitive to voltage spikes, and Irving’s position near DFW Airport’s western boundary puts gates in the path of severe straight-line winds and lightning activity. We replace fried boards with OEM units and install surge protection where the electrical service allows. Aftermarket boards often fail within a season on Irving’s heavy iron gates.
- TSS2 gear-box oil leaks accelerated by vibration. Valley Ranch’s HOA-specified ornamental iron gates weigh substantially more than standard aluminum units. That mass creates harmonic vibration in the TSS2’s worm-drive gearbox, breaking down seals faster than Ghost Controls’ standard duty cycle assumes. We spot the seepage early and rebuild or replace before the gears grind.
- Obstruction sensor misalignment from clay soil heave. Irving’s expansive black clay swells and contracts through drought-flood cycles. Gates in 75038 and 75039 ZIP codes drift out of plumb within a single season, throwing off the infrared or magnetic sensor alignment. We realign the gate frame first, then recalibrate the sensors. Otherwise you’re chasing phantom obstructions forever.
- Seized motors from years of misalignment grinding. When clay heave goes unaddressed, the gate frame binds in its track or against the post. The TSS1 or TSS2 motor keeps trying to push through, overheating the armature and welding the brushes. At that point, motor replacement plus post reinforcement is the only lasting fix.
- HOA access-control integration failures. Valley Ranch’s original 1980s community-entry systems were wired for specific Ghost Controls timer protocols. When homeowners swap in generic operators, the phone entry system stops communicating. We re-key the wiring to match HOA specs and source finish-matched panels from suppliers who keep the Valley Ranch spec sheet on file.
Ghost Controls Service in Irving: What Local Conditions Mean for Your Equipment
Valley Ranch’s original 1980s developer-installed Ghost Controls operators are now reaching end-of-life simultaneously. We typically replace two or three TSS1 units per week just within the Valley Ranch Homeowners Association areas. That’s not a statistic you’d see in Coppell or Grand Prairie, where gate stock is newer and more varied. This concentration creates a specific repair pattern: most Irving calls aren’t about Gate Installation in Irving, they’re about keeping aging premium hardware running on schedule.
The clay soil makes it worse. A TSS1 that might last fifteen years in sandy loam dies in ten here because the post shifts, the gate binds, and the motor overworks. Last month we serviced a 1992 Ghost Controls TSS1 at a Valley Ranch driveway gate on MacArthur Boulevard - the motor had seized from years of clay-heave misalignment grinding the gear train. We replaced the entire operator, reinforced the post footing with a 24-inch concrete base to combat soil movement, and re-keyed the phone entry system to match the HOA’s access control wiring - the kind of Dallas Ghost Controls service we specialize in. That’s the kind of job you can’t price over the phone, but it’s the kind of job we do right because we’ve done it before.
Our Irving service area covers all four ZIP codes with technicians who carry the Valley Ranch spec sheet, the Las Colinas HOA contact list, and enough concrete mix to pour a proper footing the same day.
Ghost Controls Models & Products We Service in Irving
We work on the full Ghost Controls residential and light-commercial line:
- TSS1: The single-swing workhorse found on thousands of Valley Ranch driveways. We stock replacement motors, control boards, and obstruction sensor kits for same-day turnaround.
- TSS2: Dual-swing operator for heavier ornamental iron gates. Gear-box rebuilds and motor replacements are common; we carry OEM seals and oil-specified lubricant.
- AG2: Slide-gate operator, less common in Irving’s HOA corridors but present on some commercial and alley-access installations. We service chain-drive and rack-drive configurations.
We always carry OEM Ghost Controls boards and motors. Aftermarket equivalents often fail within a season on Irving’s heavy iron gates. When a board fails twice on the same operator, our techs recommend replacing the full unit. The math is straightforward: two board replacements plus labor approaches the cost of a new operator with a fresh warranty.
Ghost Controls Service Pricing in Irving
Most Ghost Controls repairs in Irving fall between $180 and $450, depending on whether we’re realigning a gate frame, replacing a control board, or swapping a seized motor. Full operator replacement on a double ornamental iron gate typically runs $1,200 to $2,100, including removal, disposal, new unit, and re-integration with HOA access control.
Here’s how pricing breaks down for typical Irving calls:
- Diagnostic and estimate: Free
- Gate realignment and sensor recalibration: $180-$280
- Control board replacement (OEM): $340-$450
- TSS1 or TSS2 motor replacement: $420-$580
- Post repair with 24-inch concrete footing: $380-$650
- Full operator replacement (TSS1/TSS2): $1,200-$2,100
We settle on an upfront price before turning a single bolt. No surprises on the bill. Active offers include $50 off any repair over $250, a free second opinion on any written estimate, and our $89 seasonal tune-up. Seniors and veterans receive 5% off, always. Call (833) 754-7503 for an exact quote on your gate.
Serving Irving, CA - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Irving
Probably. Ghost Controls boards are particularly sensitive to voltage spikes, and Irving’s afternoon thunderstorms near DFW Airport generate frequent lightning-without-direct-strike events that surge through residential power. We test the board with a multimeter and swap in an OEM replacement if it’s dead. Call (833) 754-7503 - we can usually diagnose and fix same-day.
Yes, and we address the root cause, not just the symptom. We excavate the existing footing, pour a 24-inch concrete base below the clay’s active zone, and reset the post plumb before realigning the gate and recalibrating the Ghost Controls operator. Without that depth, you’ll be calling again next spring.
We stock OEM-compatible remotes and can program them to your existing TSS2 receiver. If the receiver board is also failed, we replace both so you’re not back in the same spot. Remotes are tested before we leave.
Most often it’s misalignment from clay soil heave, not the sensors themselves. The gate frame shifts, the sensor eyes no longer line up, and the safety circuit trips. We check the frame plumb first, realign if needed, then clean and recalibrate the sensors. If the board is falsely reporting obstructions that aren’t there, we replace it with an OEM unit.
Expect $420 to $580 for the motor replacement, plus $180 to $280 if the gate frame needs realignment from clay heave. A double ornamental iron gate in Las Colinas often needs both. We offer $50 off if the total exceeds $250. Call (833) 754-7503 for a free, exact estimate.
Service Areas Near Irving
We run Ghost Controls service throughout the DFW Metroplex and beyond. Nearby areas include Ghost Controls service in Frisco, Ghost Controls service in Round Rock, and our broader coverage of Los Angeles, San Jose, San Francisco, Sacramento, Fresno, and Long Beach. Wherever your gate is, we bring the same parts stock and the same 90-Day Done Right Promise.
Book Your Ghost Controls Service in Irving Today
A gate should open when you need it to and stay closed when you don’t. Everything else is just the work. If your Ghost Controls operator is acting up in Irving, call (833) 754-7503. A live person answers 24 hours a day, 7 days a week. We’ll schedule your free estimate, show up when we say, and fix it right - backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving since 1984.