Fast, Reliable Gate Installation Across Irving
Gate installation in Irving typically runs $2,800-$6,500 for a standard residential driveway gate, with most projects completed in one to three days. We’re Ironworks Gate Co., and we’ve been installing gates across the DFW Metroplex since 1984. Our Gate Installation team knows Irving’s neighborhoods well, from the aging ranch homes south of Airport Freeway to the dense townhome clusters of Las Colinas and Valley Ranch where HOA specifications and tight clearances define every job. We carry the brands Irving properties actually use, stock finish-matched ornamental iron panels for Valley Ranch’s exacting standards, and we’re familiar with the expansive black clay that shifts posts here like nowhere else in Texas. If you’re in 75060, 75061, 75062, or 75063, call (833) 754-7503. A live person answers, day or night.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Installation Company
We’ve been serving Irving homeowners for over four decades. In that time, we’ve installed and replaced gates along MacArthur Boulevard, near the Irving Convention Center, and throughout the winding cul-de-sacs of Valley Ranch where HOA inspectors measure picket spacing with a tape measure.
Our technicians are background-checked, uniformed, and trained on nine automation brands including Linear, Viking, and Ghost Controls. Most Irving jobs finish in a single visit. Before we turn a single bolt, you’ll have an upfront price in writing. No surprises on the bill.
Every installation carries our 90-Day Done Right Promise, the Keystone Standard. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions. That’s been our way since 1984, and it’s why Irving homeowners who’ve been burned by one-truck outfits call us when they want the job done once and done correctly.
Our phone rings 24 hours a day, 7 days a week. A live person answers, not a voicemail tree, not a callback queue. If your gate is stuck open at midnight or you’re scheduling a planned upgrade, you’ll talk to someone who can actually help.
Our Gate Installation Services in Irving
Double Gate Installation
Double gates dominate Irving’s established neighborhoods, especially in Las Colinas and Valley Ranch where wider driveway aprons accommodate dual-leaf ornamental iron systems. We install double swing and double sliding configurations, always accounting for the uneven settling that Irving’s black clay produces. Each post gets a deep concrete footing below the clay’s active zone, and we align leaves to meet precisely even after seasonal ground movement. For HOA communities, we source panels that match existing community standards, down to the picket profile and powder-coat gloss.
Swing Gate Installation
Swing gates remain the most common request we get from Irving’s older neighborhoods south of I-30, where single-leaf systems fit narrower 1950s-1970s driveways. We pay particular attention to hinge reinforcement here, DFW’s straight-line winds, channeled across the flat terrain near DFW Airport’s western boundary, regularly rack aluminum gates off underspec hardware. Our installs use reinforced brackets and proper jamb depth to keep the gate true through storm season. For alley-load situations common in Las Colinas townhomes, we spec compact operators with limited swing arcs to avoid encroaching on neighboring property or vehicle traffic.
Security Gate Installation
Irving’s density and proximity to major commercial corridors make security-focused installation a priority for many homeowners. We install systems with keypad entry, rolling-code remote access, and video intercom integration, configured to work with community access-control networks in master-planned developments. For rental properties near the University of Dallas or along Story Road, we favor operator systems with audit trails and programmable temporary codes, giving landlords control without constant rekeying. Every security install includes a walkthrough of the system’s features before we leave.
Sliding Gate Installation
Sliding gates solve the clearance problems that plague Irving’s tighter lots, particularly in Valley Ranch townhomes and newer infill near the Toyota Music Factory where driveway depth is minimal. We install cantilever and track-mounted systems, selecting track gauge and roller hardware based on gate weight and expected cycle frequency. In Irving’s clay soil, track foundation work is critical, we pour independent footings for track posts rather than relying on surface-mounted hardware that heaves with ground moisture changes.
Driveway Gate Installation
From chain-link retrofits in south Irving’s ranch neighborhoods to full ornamental iron systems in Las Colinas, our driveway gate installations start with a site evaluation of your specific soil conditions, slope, and access constraints. We handle permitting questions, HOA documentation, and utility clearance coordination. The result is a gate that opens and closes reliably through Irving’s wet springs and dry summers alike.
Pedestrian Gate Installation
Pedestrian gates see heavy use in Irving’s walkable neighborhoods and community-entry applications. We install matching walk-through gates alongside driveway systems, with self-closing hinges, magnetic latches, and lock hardware that coordinates with the main gate’s access control. Finish matching to existing community standards is standard practice, not an upsell.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We maintain certification and parts inventory for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Irving customers, this means the correct operator or replacement component is available without the week-long waits that send homeowners to generic internet suppliers. We stock Linear and Viking control boards locally for same-day replacement on failed operators, and we carry Ghost Controls solar-compatible systems for properties where trenching power to the gate line is impractical. Our familiarity with DoorKing’s telephone-entry systems is especially relevant for Irving’s multi-unit and community-entry applications. Whatever hardware is on your driveway, we’ve likely installed, repaired, and warrantied it before.
Common Gate Installation Problems We See in Irving Homes
- Posts heaving out of plumb in black clay. Irving sits on North Texas’s notorious expansive black clay, which swells and contracts dramatically through drought-flood cycles. Gate posts set without deep concrete footings routinely shift after a dry summer or wet spring, causing gates to drag, bind, or gap at the latch. Our installations use footings below the active clay zone, with post adjustment capability built in.
- HOA mismatch on ornamental iron panels. Valley Ranch HOA specifications lock in particular picket patterns and gloss-black powder-coat finishes. A technician who sources a generic replacement panel arrives with the wrong profile, generating a callback. We keep the Valley Ranch spec sheet on file and source finish-matched panels as a matter of course.
- Wind damage to aluminum swing gates. Severe thunderstorms with straight-line winds, common near DFW Airport’s western boundary, regularly rack aluminum swing gates off their hinges. Our installations use reinforced hinge brackets and proper jamb depth to resist these loads.
- Inadequate footings on retrofitted ranch gates. Older south and central Irving neighborhoods consist largely of 1950s-1970s ranch homes where chain-link or wood gates were retrofitted with minimal post footings. Post-replacement with proper depth and diameter is a frequent and necessary upsell to achieve reliable operation.
Pricing for Gate Installation in Irving, TX
Here’s what gate installation costs in Irving’s current market:
| Service | Typical Range in Irving |
|---|---|
| Single swing gate (basic, wood or chain-link) | $2,800-$4,200 |
| Double swing gate (ornamental iron, HOA spec) | $4,500-$7,200 |
| Sliding gate (track or cantilever system) | $5,200-$8,500 |
| Gate operator/automation (installed) | $1,800-$3,400 |
| Security keypad/access control add-on | $650-$1,400 |
| Post replacement (deep footing, clay soil) | $800-$1,600 per post |
These ranges reflect Irving’s specific conditions: HOA-specified ornamental iron costs more than generic panels, deep footings in expansive clay add material and labor, and tight-access townhome sites require specialized equipment. We provide upfront, itemized pricing before work begins. Estimates are free. Call (833) 754-7503 to schedule.
Active offers: $50 off any repair over $250; free second opinion on any written estimate; $89 seasonal tune-up; 5% senior and veteran discount always applied.
We Also Serve Cities Near Irving
Our Gate Installation in Irving crews regularly travel to neighboring communities. We also serve Farmers Branch, University Park, Highland Park, and Dallas with the same single-visit efficiency and written 90-Day Done Right Promise. If you’re near the Irving border, call, we’ll confirm coverage and schedule.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Irving
Yes. Irving’s expansive black clay demands deeper concrete footings, typically 36-48 inches below grade, to escape the soil’s active swelling zone. Without this, posts heave within one to two seasons and the gate binds or gaps. We install adjustable post bases where possible and always use footings sized for clay conditions, not the sandy-loam standards from generic installation guides. Call (833) 754-7503 for a free site evaluation.
Yes. We keep Valley Ranch’s spec sheet on file, including the 4-inch picket spacing and gloss-black powder-coat finish requirements. In Valley Ranch, we replaced a failing FAAC operator on a decorative iron swing gate at a townhome community near SH-114, sourcing a finish-matched replacement panel to match the HOA’s spec and ensuring the gate fit the community’s access-control wiring without callback. We source panels from finish-matched suppliers, not generic stock. Call (833) 754-7503 to confirm your community’s specifications.
A compact swing-gate operator with a limited arc, or a sliding gate system if lateral clearance allows. Alley-load driveways in Las Colinas and near the Toyota Music Factory often have less than 14 feet of back clearance, so standard full-swing operators risk hitting parked vehicles or encroaching on neighboring property. We spec Linear or Viking compact operators with adjustable swing limits, or track-mounted sliding systems that require no rear clearance at all. Call (833) 754-7503 and we’ll measure your specific site.
Most Las Colinas double gate installations complete in two to three days: one day for post setting and concrete cure, one day for panel hang and operator install, plus a half-day for access-control integration and final adjustment. HOA communities may require pre-installation inspection or documentation, which we handle directly. We coordinate with your HOA’s timeline and access requirements. Call (833) 754-7503 to schedule around your community’s requirements.
Yes. We install keypad and rolling-code remote systems for rental properties throughout Irving, particularly near the University of Dallas and along Story Road where tenant turnover is frequent. Rolling-code technology prevents code capture and replay, and programmable temporary codes let you grant access without rekeying between tenants. We configure systems with landlord override access and audit trails where desired. Call (833) 754-7503 for an exact quote, estimates are free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving and the DFW Metroplex since 1984.