Fast, Reliable Gate Repair Across Irving
Gate repair in Irving typically runs $180-$650 depending on the problem, and most jobs are completed in a single visit with upfront pricing settled before work begins. Ironworks Gate Co. has been serving the Irving area since 1984, and our technicians know the difference between a Valley Ranch HOA ornamental iron gate and a 1960s ranch-home chain-link retrofit. Call (833) 754-7503 anytime - a live person answers, 24 hours a day, seven days a week.
We drive to Irving from our Dallas-Fort Worth operation regularly, and we know the local conditions that wear gates out here: the expansive black clay that heaves posts out of plumb, the straight-line winds that roll off the flat terrain near DFW Airport, and the aging HOA-mandated iron systems in Las Colinas and Valley Ranch that are failing all at once. Our Gate Repair team carries the parts and the spec sheets to fix it right the first time.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Repair Company
Homeowners in Irving have kept us busy for more than four decades. We’ve realigned gates on MacArthur Boulevard, welded broken hinges in south Irving’s ranch neighborhoods, and replaced obsolete operators in Las Colinas communities that other companies couldn’t source parts for. Our reputation here is built on showing up when we say we will and standing behind the work.
Our customers in Irving leave reviews that mention the same things: the technician arrived on time, explained the problem plainly, and the price matched the quote. We’re proud of that track record. It reflects the K.E.Y.S. values code our technicians follow on every job: Krafted right, Every time, Your home first, Standing behind it.
Response time to Irving is typically same-day or next-day for standard repairs, and we prioritize emergency calls when a gate is stuck open or a motor has failed completely. You won’t reach a voicemail tree when you call - a live person picks up, notes your address and problem, and gets a technician routed.
We keep Valley Ranch HOA spec sheets on file, we know which south Irving neighborhoods have shallow post footings from the 1960s, and we stock finish-matched panels for the ornamental iron gates that dominate the 75038 and 75039 ZIP codes. That local knowledge saves you a callback.
Our Gate Repair Services in Irving
Gate Realignment
A gate that drags, binds, or won’t latch is usually out of alignment, and in Irving the causes are specific to this ground. The expansive black clay beneath south and central Irving swells when wet and shrinks during drought, pushing shallow post footings out of plumb. We’ve realigned gates in the 75060 ZIP code where the posts had shifted three inches after a wet spring. Realignment in Irving typically costs $180-$320. We reset posts in concrete where needed, check hinge wear, and adjust the operator limit switches so the gate closes clean every time.
Post Repair and Replacement
Post repair is our most frequent call in Irving’s older neighborhoods. The 1950s-1970s ranch homes south of Airport Freeway were built with minimal gate infrastructure - often a steel post set in a shallow hole with little or no concrete footing. That hardware wasn’t designed for automated operators or Irving’s clay soil. Post replacement in Irving clay soil runs $340-$580, including removal of the old post, excavation to below the frost line, a concrete footing engineered for expansive soil, and rehanging the gate plumb and level. In Valley Ranch and Las Colinas, we work with brick pillar systems that require finish-matched panels and careful coordination with HOA guidelines.
Weld Repair
Ornamental iron gates in Irving’s HOA communities were built to last, but welds fatigue after thirty-plus years of opening and closing. We see cracked picket welds, broken scrollwork, and hinge plates pulling away from frames - especially on gates that have been stressed by wind or soil movement. Our technicians are equipped to weld on-site, matching the original fabrication where possible. A typical weld repair on an Irving ornamental iron gate runs $220-$400. We grind, prime, and touch-match the finish so the repair doesn’t announce itself.
Hinge Repair and Lock Repair
Hinge repair in Irving often follows storm damage. The flat, open terrain west of DFW Airport channels severe thunderstorm winds directly into residential lots, and aluminum swing gates take the brunt. We’ve replaced sheared hinge pins in Las Colinas and bent j-bolts in Valley Ranch after spring storm seasons. Hinge repair runs $150-$280. Lock repair, including keypad and magnetic latch systems, ranges $180-$350 depending on whether we’re repairing the mechanism or replacing it with a modern equivalent.
Rust Treatment
Iron gates in Irving face humidity, occasional ice, and the salt residue from road treatment on SH-114 and Loop 12. Rust treatment starts at $200 for spot work and runs to $480 for full gate stripping, treatment, and re-coating. We match the original finish, including the gloss-black powder coat specified by Valley Ranch HOA guidelines.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Irving homeowners, this means the correct fix on the first visit, whether you have a 1990s Elite operator on a Las Colinas estate gate or a newer Ghost Controls system in Valley Ranch. We stock common parts locally and can source discontinued boards and gearboxes through our network when a full retrofit isn’t necessary. Our Valley Ranch spec file includes finish-matched panels and operator compatibility notes that keep HOA compliance simple.
Common Gate Repair Problems We See in Irving Homes
- Post heave from expansive black clay. Irving sits on North Texas’s notorious expansive clay, which swells and contracts through drought-flood cycles. Gate posts set without deep concrete footings routinely heave out of plumb, causing gates to drag, bind, or gap at the latch. South Irving’s 1950s-1970s ranch homes are especially vulnerable.
- Wind-racked aluminum swing gates. DFW severe thunderstorms with straight-line winds, channeled across the flat, open terrain near DFW Airport’s western boundary, regularly rack aluminum swing gates off their hinges. We see this every spring in open lots throughout the 75014-75017 ZIP codes.
- Obsolete operator electronics in 1980s-1990s Las Colinas gates. Proprietary wiring and discontinued control boards make repair tricky. We often retrofit modern LiftMaster or FAAC boards to keep the original gate look without a full replacement.
- Finish-matched panel wear in HOA communities. Valley Ranch HOA specifications lock in particular ornamental iron picket patterns and gloss-black powder-coat finishes. A technician who sources generic replacement panels generates a callback. We keep the spec sheet on file.
Pricing for Gate Repair in Irving, TX
Honest pricing matters. Here’s what gate repair costs in Irving’s market:
| Service | Typical Range in Irving |
|---|---|
| Hinge repair | $150 - $280 |
| Gate realignment | $180 - $320 |
| Weld repair | $220 - $400 |
| Lock / latch repair | $180 - $350 |
| Rust treatment (spot) | $200 - $480 |
| Post repair / replacement | $340 - $580 |
| Operator repair | $280 - $520 |
| Operator replacement | $680 - $1,400 |
What moves the price: depth of post footing required for clay soil, whether finish-matched panels must be special-ordered for HOA compliance, and the age of the operator (discontinued parts cost more to source). We settle on a firm, upfront price before turning a single bolt. Estimates are free. Active offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Irving
Our service area extends throughout the Dallas-Fort Worth Metroplex. We regularly repair gates in Irving and the surrounding communities of Farmers Branch, University Park, Highland Park, and Dallas. The same live-answer phone line, same upfront pricing, same 90-Day Done Right Promise applies to every call.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Irving
Your posts are likely set in North Texas expansive black clay without adequate concrete footings below the active soil layer. When clay gets wet, it swells and pushes shallow posts out of plumb; when it dries, it shrinks and leaves voids. In Irving, we solve this by excavating to 36-42 inches, pouring a concrete footing with bell-bottom base, and resetting the post with proper drainage. Post replacement in Irving’s clay soil typically runs $340-$580. Call (833) 754-7503 for a free inspection.
Sometimes we can repair it by sourcing discontinued parts or rebuilding the gearbox, but often the most reliable path is retrofitting a modern FAAC or LiftMaster operator while preserving the original gate hardware and appearance. We serviced a heavy FAAC 400 swing operator on a Valley Ranch HOA community entry gate where the gearbox had stripped after 25 years of use. The HOA’s spec required a gloss-black powder-coat finish and a specific picket pattern to match the original 1980s design; we sourced the replacement panel from our Valley Ranch spec file and adjusted the new operator’s limit switches on-site, avoiding a costly full replacement call-back. Retrofit costs in Valley Ranch typically run $680-$1,100. Call for a free assessment.
No, a properly installed gate should not drag after routine weather. Dragging after storms usually means the hinges are bent, the posts have shifted, or the frame has racked under wind load. DFW’s straight-line winds, channeled across flat terrain near DFW Airport, are particularly hard on aluminum swing gates in open lots. We inspect for hinge damage, post plumb, and frame squareness, then realign and reinforce as needed. Realignment runs $180-$320. Call (833) 754-7503 - we’ll check it out at no charge.
We keep Valley Ranch HOA spec sheets on file and source finish-matched panels through our verified suppliers. A generic panel from a standard catalog will not match the picket profile or gloss-black powder coat required by Valley Ranch guidelines. We learned that the hard way once, early on. Now we confirm the spec before ordering. Panel replacement with finish match typically runs $280-$520 depending on gate width. Call to confirm your HOA section and schedule.
Gate post replacement in Irving’s expansive clay soil typically costs $340-$580. The price includes removing the failed post, excavating to below the active soil layer (usually 36-42 inches), pouring a concrete footing engineered for clay expansion and contraction, and rehanging the gate plumb and level. Shallow footings are why the original post failed; we don’t repeat that mistake. Estimates are free. Call (833) 754-7503.
Ready to get your gate working right? Call Ironworks Gate Co. at (833) 754-7503. A live person will answer, day or night, and we’ll get you scheduled for a free estimate at your Irving home. Every repair is backed by our written 90-Day Done Right Promise - no paperwork, no arguing, no exceptions. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving and the DFW Metroplex since 1984.