Ghost Controls Gate Repair in Dallas, CA | Ironworks Gate Co.
We provide independent Ghost Controls gate repair across Dallas, TX, not as an authorized dealer, but as a crew that has spent years fixing these operators in the exact conditions that break them here. The one thing that makes our Ghost Controls work different? We know Dallas’s black clay soil tilts posts and strips gears before the motor itself ever fails, so we check footing depth and column plumb first, not last. If your Ghost Controls gate is grinding, stuck, or dead, call us at (833) 754-7503 for same-day service and upfront pricing.
Why Dallas Residents Choose Us for Ghost Controls Service
Victor Salinas grew up in Boyle Heights watching a neighbor weld wrought-iron gates, then trained in welding and metal fabrication at Los Angeles Trade-Technical College before spending decades working operators across the LA basin. That background matters in Dallas because Ghost Controls repair here is rarely just an electronics fix. It’s welding a cracked column bracket, re-pouring a footing that black gumbo shifted, then recalibrating the operator to match. His daughter runs the office now, and she’ll tell you the best decision he ever made was keeping that hands-on approach.
We’re trained and equipped on nine gate-automation brands including Ghost Controls, so we carry the correct boards, motors, and gear sets for TSS1 through AMS2 models. Our trucks stock OEM Ghost Controls parts plus US-made aftermarket alternatives when factory items are backordered. Every job carries our written 90-Day Done Right Promise, no paperwork, no arguing. A live person answers the phone 24 hours a day, 7 days a week.
Common Ghost Controls Gate Repair Problems We Solve in Dallas
- Ghost Controls TSS1/TSS2 gear stripping - Single-swing gates on Dallas estates see this constantly. When black clay soil shifts the post even two inches, the gate arm binds against its travel path and overloads the drive gears. We replace the gear, but we also check and reset the post footing so it doesn’t happen again next rainy season.
- Control board moisture damage - Dallas freeze-thaw cycles, especially after ice storms like February 2021, force moisture through open seams in heaved brick columns. The plasma-cutter circuits on Ghost Controls boards corrode from the inside out. We seal the enclosure, replace the board with OEM parts, and recommend column repair if the masonry is compromised.
- Limit switch misalignment - Clay movement lets the gate drift past its programmed stops, which either fries the limit switch or bends the actuator arm. This is frequent in Bluffview’s 1990s brick columns where shallow footings never reached stable ground. We realign the gate travel, replace the switch, and document column movement for the homeowner.
- Battery failure after ice storms - Ghost Controls backup batteries die after one deep freeze when they’re housed in unsealed gate boxes. Dallas doesn’t get snow often, but freezing rain penetrates every gap. We install sealed battery housings and test charging circuits after any winter event.
- Gate arm bolt shear - Dallas’s black gumbo clay shrinks up to 4 inches in drought and swells with rain, creating lateral stress that shears the mounting bolts on TSS1/TSS2 swing arms. This failure pattern is rare in Houston’s sandy loam or Austin’s limestone. We upgrade to grade-8 hardware and, when needed, extend footings below the active soil zone.
Ghost Controls Service in Dallas: What Local Conditions Mean for Your Equipment
Dallas sits on the Blackland Prairie’s expansive black clay soil, the notorious “black gumbo” that swells aggressively in wet seasons and shrinks several inches during summer drought. This heave-and-shrink cycle tilts and cracks gate posts and masonry columns more severely than in nearly any other major Texas city. For Ghost Controls owners, that means most repair calls trace back to shifting soil undermining the post or pillar rather than the hardware itself. No operator fix, no limit switch replacement, no new control board holds long if the post footing has moved two inches off plumb.
In Kessler Park and Bluffview, brick masonry gate columns installed during the 1990s-2000s real estate boom are routinely found cracked at the base or leaning 2-4 inches off plumb. The footings were poured shallow, never reaching below the active soil zone where black gumbo stops its seasonal dance. Experienced Dallas gate techs check footing depth and column plumb before touching any operator or hardware. We learned that the hard way on a 1998 brick column near West 7th Street in Kessler Park: the Ghost Controls TSS1 motor was grinding because the post had tilted three inches from clay heave. We re-set the concrete footing to below 48 inches, plumbed the column, and replaced the stripped drive gear. Gate runs silent now. A gate should open when you need it to and stay closed when you don’t. Everything else is just our Gate Repair in Dallas.
Ghost Controls Models & Products We Service in Dallas
We service the full Ghost Controls residential and light-commercial line: the TSS1 single-swing operator, TSS2 dual-swing system, TSS3 heavy-duty single swing, and AMS2 slide gate operator. Our Dallas trucks stock OEM Ghost Controls control boards, drive motors, limit switches, and battery kits for same-day resolution on most calls. When OEM gears or hinges are backordered, we source US-made aftermarket equivalents and tell you exactly how fit and warranty coverage differ before we install. We are an independent service provider, not manufacturer-authorized, which means our recommendations are based on what your gate actually needs, not what a brand catalog pushes.
Our Ghost Controls sales & service covers new installations, retrofits on existing columns, and full automation upgrades from manual gates.
Ghost Controls Service Pricing in Dallas
Most Ghost Controls repairs in Dallas fall between $180 and $520, depending on whether we’re addressing operator electronics, mechanical gear replacement, or post-and-column stabilization. A typical service call with diagnosis runs $120-$160. Control board replacement with OEM parts: $280-$420. Drive gear replacement (TSS1/TSS2): $180-$340. Post resetting and footing extension below the active soil zone: $380-$780 depending on column size and access.
We settle on upfront pricing before turning a single bolt. No surprises on the bill. Our standing offers include $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans receive 5% off, always. Call (833) 754-7503 for an exact quote on your Ghost Controls gate, estimates are free.
Serving Dallas, CA - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Dallas
Black clay soil movement shifts the gate post, which lets the gate drift past its programmed travel stops and overwork the limit switch. In Dallas, we see this most in Bluffview and Kessler Park brick columns with shallow footings. We replace the switch, realign the gate travel, and check column plumb to prevent repeat failure. Call (833) 754-7503 if your gate is overshooting its stops.
The TSS2 is rated for dual gates up to 20 feet combined width and 900 pounds total weight, which covers most Highland Park estate installations. We verify gate weight and balance on every Gate Installation in Dallas, and we won’t install or repair an operator on a gate that exceeds spec. If your ironwork is heavier, we recommend the TSS3 or a commercial-grade alternative from our nine-brand lineup.
Freezing rain penetrates unsealed battery housings and kills backup cells in one event, then moisture corrodes charging circuits. We replace the battery with a sealed enclosure, test the control board for hidden corrosion, and verify the transformer output. Same-day service is usually available for storm-related failures, call (833) 754-7503.
If the motor and control board test healthy, gear replacement is typically the better value, $180-$340 versus $800+ for full operator replacement. We always check whether post shift caused the gear failure, though. Fixing the gear without addressing the footing is throwing good money at bad clay. We’ll show you both options with honest numbers.
Yes. We integrate Ghost Controls operators with wired and wireless intercom systems, including keypad and telephone-entry configurations common in Dallas’s older estate neighborhoods. The AMS2 slide operator pairs cleanly with most entry systems. Call (833) 754-7503 to discuss your specific pedestrian gate setup and get a free estimate.
Service Areas Near Dallas
We serve homeowners throughout the Dallas metro and surrounding communities. Our Dallas service area covers ZIPs 75217, 75218, 75219, and 75220 with same-day response available. We also provide Ghost Controls service in Canton and Ghost Controls service in Reading for property owners outside the immediate Dallas radius. Additional coverage includes Los Angeles, San Jose, San Francisco, Sacramento, Fresno, and Long Beach.
Book Your Ghost Controls Service in Dallas Today
A live person answers our phones 24 hours a day, 7 days a week. Most Ghost Controls repairs in Dallas are completed in a single visit with upfront pricing settled before we start. Call (833) 754-7503 now for your free estimate, or ask about our $89 seasonal tune-up to catch post shift and gear wear before they strand you at the driveway.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Dallas since 1984.