Gate Parts & Welding in Converse, TX - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Parts & Welding Across Converse

A sagging gate in Converse that drags across the driveway after every spring rain is not a hinge problem. It is a post problem. And in Converse, where the heavy black clay soils of northeastern Bexar County heave and shrink through wet-dry cycles, we see this exact failure on Gibbs Sprawl Road, in Camelot II, and throughout the 78109 zip code nearly every week. Our Gate Parts & Welding team arrives same-day to Converse properties with the welders, posts, and heavy-duty hardware to fix it permanently, not patch it for another season. Call (833) 754-7503 and a live person will answer, 24 hours a day.

Call (833) 754-7503

Why Ironworks Gate Co. Is Converse’s Preferred Gate Parts & Welding Company

We have been serving communities like Converse since 1984, and we have learned that the gates here age differently than they do elsewhere in Bexar County. The 1990s and early-2000s suburban tracts that dominate Converse housing were built with wood privacy fences and rear-entry gates that are now hitting 20 to 30 years old all at once. The original metal post hardware has corroded through humid summers. The wood frames have dried, warped, and split around screws that were never meant to last this long.

Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. We are trained and equipped on nine gate-automation brands, including Viking, Ghost Controls, and DoorKing, so the correct fix happens on the first visit. Most jobs are completed in a single trip, with upfront pricing settled before we turn a single bolt. And every job is protected by our 90-Day Done Right Promise, the Keystone Standard, written and without argument.

We pulled a sagging LiftMaster-driven gate at a rental property on Gibbs Sprawl Road where the original post had tilted 2 inches after spring rains. The tenant’s property manager had tried tightening hinges twice; we dug out the post, added a 48-inch concrete footer below the clay shrink-swell layer, and reset the gate plumb with new heavy-duty hinges. No callbacks in two seasons.

Our Gate Parts & Welding Services in Converse

Hinge Replacement in Converse

Hinge replacement is the most common call we get in Converse, and it is almost never just the hinge. The original 1990s-era screws have stripped out of dried, warped wood frames, or the post itself has tilted in the clay soil and is pulling the hinge plate out of true. We replace with heavy-duty ball-bearing or greaseable hinges, sized to the gate weight, and we always check post plumb before we bolt up. A hinge hung on a tilted post in Converse will bind again before the next rainy season.

Post Replacement in Converse

This is the fix that actually solves the recurring drag problem in Converse. Surface-level hinge tightening is almost always a callback waiting to happen. The clay movement re-torques posts within one seasonal cycle. Our standard is to pull the post, deepen the concrete footing past the active shrink-swell layer, and reset plumb. The original tract builders rarely followed this standard. We do, every time. Post replacement in Converse typically runs $380-$650 depending on gate width, soil depth, and whether we are resetting an existing gate or hanging new.

Rail Repair in Converse

Wood gates in Converse split their top and bottom rails where the screws or bolts have worked loose through years of heat expansion and contraction. We sister-split rails with treated lumber, re-peg mortise-and-tenon joints where possible, or fabricate steel reinforcement angles when the wood is too far gone to hold fasteners. We will tell you straight when a rail repair is worth doing and when the gate frame has reached the end of its service life.

Custom Welding in Converse

For metal gates, estate entries, and wrought-iron fencing around Converse properties, we bring mobile welding equipment to the site. Broken pickets, cracked frames, failed weld joints from the original fabrication, we repair them in place. We also weld receiver boxes, strike plates, and custom mounting brackets for automation equipment when the standard kit does not fit the post or pillar configuration. Custom welding in Converse starts at $180 for simple field repairs and ranges to $450+ for structural frame welding with finish grinding and touch-up.

Trusted Brands We Service in Converse

We stock local parts and maintain certification on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Converse homeowners, this means we do not order parts and make you wait. We carry common hinge sets, post hardware, rollers, and latch assemblies on our trucks, and we have same-day access to Viking and Ghost Controls components through our San Antonio-area supply chain. The correct part, the correct brand, installed correctly the first time. That is the standard we apply on every Converse job.

Common Gate Parts & Welding Problems We See in Converse Homes

• Post heave from expansive clay soil after wet-dry cycles. Converse’s Vertisol soils swell with spring rains and shrink through summer drought, tilting posts and producing gate drag that hinge tightening alone cannot fix permanently.
• Wood frames dried and warped from Texas heat cycles, splitting around original 1990s-era hinge screws. The screws spin freely or pull out entirely, and the hinge plate pulls away from the frame with every open and close.
• Deferred maintenance from military tenant turnover near Joint Base San Antonio-Randolph. Rental properties accumulate bent rollers, corroded hardware, and binding gates across multiple PCS cycles, with no single occupant motivated to address the root problem.
• Failed original welds on metal estate gates and ornamental fencing. Gates installed in the 1990s and 2000s with MIG welds of inconsistent penetration crack at stress points after years of wind load and thermal cycling.

Pricing for Gate Parts & Welding in Converse, TX

We Also Serve Cities Near Converse

Our service area extends throughout northeastern Bexar County and surrounding communities. We regularly run calls to Windcrest, Universal City, Kirby, and Live Oak with the same-day response and upfront pricing we bring to Converse. If your gate is dragging, binding, or broken, we will be there when we say.

FAQs - Gate Parts & Welding in Converse