Fast, Reliable Gate Parts & Welding Across Windcrest
Gate parts and welding repair in Windcrest typically runs $180-$650 depending on whether you need a simple hinge weld or a full post replacement, and our Gate Parts & Welding team completes most jobs in a single visit. We’re on the road daily from our San Antonio-area base, and Windcrest’s compact 78239 footprint means we can usually be at your driveway within the hour.
We’ve been working in Windcrest long enough to know the local rhythm. The 1950s ranch homes off Walzem Road, the mid-century pockets near Windcrest Park, the older iron gates along Crestway Drive - we’ve realigned, re-welded, and replaced parts on all of them. This city sits on some of the most aggressive shrink-swell clay in Bexar County, and that soil doesn’t negotiate with gate posts. When your gate starts dragging or your hinge plate cracks, you want someone who understands why it happened, not just how to patch it. Call us at (833) 754-7503. A live person answers, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Windcrest’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has served the greater San Antonio area since 1984, and Windcrest has been part of our route for decades. Homeowners here remember contractors who show up on time and finish clean. We do both.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands - Viking, Ghost Controls, and DoorKing among them - so the correct part goes in on the first trip. No ordering, no second appointment, no gate left hanging open overnight. That’s the Keystone Standard: Krafted right, Every time, Your home first, Standing behind it.
Response time matters in a city this size. Windcrest is roughly four square miles. From the moment you call (833) 754-7503, we’re mapping the fastest route to your driveway. Most days, we’re on-site within 45 minutes. Every job carries our written 90-Day Done Right Promise - no paperwork, no arguing, just fixed right or we come back.
Our Gate Parts & Welding Services in Windcrest
Hinge Replacement
Windcrest’s ornamental iron gates from the 1960s and 1970s were built with heavy-duty barrel hinges that weren’t designed for decades of Bexar County clay heave. We’ve replaced hundreds of these on ranch homes near Windcrest Park and along Crestway Drive. A typical hinge replacement in Windcrest runs $180-$320, including removal of the seized or cracked hinge, welding a new mounting plate if the post face has spalled, and hanging the gate back to true plumb. We stock common hinge sizes for 2-inch and 2.5-inch gate frames, and we can fabricate custom brackets for oddball vintage dimensions.
Post Replacement
This is the big one in Windcrest. That black clay expands after every summer thunderstorm, then contracts when the drought returns. After fifty years, your gate post has torqued, tilted, or heaved completely out of its footing. We’ve dug out and re-set posts on Mossy Oak Drive, on properties near Walzem Road, and throughout the 78239 zip code. Post replacement in Windcrest typically costs $450-$650, including concrete removal, new steel post fabrication, re-welding of the gate mount, and proper drainage backfill to slow future heave. We recently replaced a FAAC 740 hydraulic arm on a 1960s ranch home’s driveway gate on Mossy Oak Drive. The original post had twisted 2 inches out of plumb from black-clay soil movement, causing the gate to drag on the approach. We welded a new steel post bracket, re-hung the gate, and installed rolling-code remotes for the homeowners who wanted both security and keyless access.
Rail Repair
The bottom rail on a Windcrest gate takes abuse. It scrapes the driveway when posts shift. It catches on the curb apron where the grade drops. It rusts through at the weld joints where UV and humidity have degraded the original galvanizing. Rail repair runs $220-$380 in this market. We cut out the damaged section, fabricate a matching replacement from steel tubing or ornamental bar stock, and weld it back with proper penetration so the joint outlasts the surrounding metal. For gates with decorative scrollwork, we match the original pattern so the repair disappears.
Custom Welding
Some Windcrest gates are one-of-a-kind. Maybe your grandfather installed ornamental iron in 1962 and a section has cracked. Maybe you need a custom latch bracket to clear a tight fence line on a narrow lot near Windcrest Park. Our mobile welding rigs carry 220-volt MIG and stick equipment, and our fabricators can cut, bend, and weld on-site. Custom welding in Windcrest starts around $280 and scales with complexity. We price it upfront before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Windcrest
We carry parts and maintain certification on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Windcrest homeowners, that means no waiting on specialty orders from San Antonio distributors. Our trucks stock common Viking control boards, Ghost Controls actuator arms, and DoorKing loop detectors. When your Elite slide gate operator fails in September and you’re staring down the City of Lights season, we can usually fix it that day. Same for BFT hydraulic rams and Mighty Mule solar setups. The right part, the first time.
Common Gate Parts & Welding Problems We See in Windcrest Homes
- Post footings heave in Bexar County black clay, twisting gates out of alignment and causing the bottom rail to scrape driveways or curb. We see this most on homes built between 1955 and 1975, where original concrete footings were poured without expansion joints or proper drainage.
- UV and humidity degrade galvanized coatings on 50-year-old ornamental iron gates, leading to corrosion at weld joints and hinge plates. Once rust starts under the paint, it spreads fast in Windcrest’s combination of intense sun and periodic humidity.
- Tight urban lot clearances in Windcrest mean even a minor hinge-weld crack can cause gate binding against a fence post or adjacent structure. We’ve cleared jams on gates with less than 3 inches of swing clearance.
- The September-November pre-holiday rush strains aging gates that have been dragging all summer. Homeowners call us to fix what they’ve been ignoring, because a sagging gate under Christmas lights is hard to miss when ten thousand cars roll past.
Pricing for Gate Parts & Welding in Windcrest, TX
Here is what we typically charge for gate parts and welding work in the Windcrest market. These are real ranges, settled upfront before we start:
| Service | Typical Range in Windcrest |
|---|---|
| Hinge replacement (single) | $180-$320 |
| Hinge replacement (double gate, both sides) | $320-$480 |
| Bottom rail repair / section replacement | $220-$380 |
| Custom welding (on-site fabrication) | $280-$550 |
| Gate post replacement (single) | $450-$650 |
| Post re-plumb / bracket weld (no new post) | $240-$380 |
| Gate roller replacement (slide gate) | $160-$280 |
| Latch / lock mechanism repair or replace | $140-$260 |
What moves the needle? Post depth and concrete removal add labor. Custom ornamental matching takes time. And if we need to coordinate with your automation brand - say, a Viking or DoorKing system that requires specific bracket geometry - we’ll tell you before we quote. No surprises on the bill. Estimates are free. Call (833) 754-7503.
Active offers for Windcrest homeowners: $50 off any repair over $250. Free second opinion on any written estimate. $89 seasonal tune-up. Senior and veteran discount of 5%, always.
We Also Serve Cities Near Windcrest
Our service radius covers Windcrest and the surrounding communities where the same Bexar County clay and mid-century housing stock create identical gate problems. We work regularly in Converse, Live Oak, Kirby, and Universal City. Same trucks, same technicians, same 90-Day Done Right Promise.
Serving Windcrest, TX - Our Local Coverage Area
We’re based in the Windcrest area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Windcrest
Bexar County’s black clay soil shrinks dramatically during prolonged drought, then swells when thunderstorms finally arrive. That seasonal expansion and contraction torques gate posts out of plumb and stresses weld joints until the gate drags or binds. We see the peak call volume in late August through October, when the first big rains hit soil that’s been baked hard for months. If your gate scraped all summer, it will likely be worse after the fall storms. Call (833) 754-7503 for a free inspection.
Yes, in most cases we can add a modern receiver or replace the control board to accept rolling-code remotes on vintage LiftMaster operators. The 1960s operator itself may still run strong, but the original radio system is obsolete and insecure. We recently upgraded a Windcrest home near Crestway Drive with this exact setup. The homeowner kept their original chain-drive operator, gained keyless entry, and eliminated the risk of code-grabbing theft. Cost typically runs $280-$420 depending on receiver compatibility. Call for an exact quote.
Windcrest’s combination of clay-heaved posts and tight lot clearances puts side-load stress on slide-gate rollers that other neighborhoods don’t see. When the post tilts, the gate doesn’t roll straight. The wheels grind against the track, bearings seize, and the nylon or steel wheels flat-spot. Add UV degradation on older polymer wheels, and you have a recipe for premature failure. We install heavy-duty sealed-bearing rollers with higher side-load ratings for Windcrest conditions. Roller replacement runs $160-$280.
Yes. We carry BFT hydraulic fluid, seal kits, control boards, and actuator hardware on our trucks. The BFT brand was popular in the 1970s and 1980s for residential swing gates, and many are still running in Windcrest’s older neighborhoods. If your BFT unit needs a part we don’t have in stock, our distributor relationship means next-day availability for most items. We won’t leave your gate unsecured. Call (833) 754-7503 to schedule.
We address this with a combination of post re-plumbing, hinge relocation, and sometimes a custom-fabricated bottom rail with adjusted geometry. On steep approaches common in parts of Windcrest near the park, a standard rectangular gate frame will always scrape unless the hinge point or rail profile is modified. We’ve welded tapered bottom rails and offset hinge brackets to clear grade changes without cutting the gate shorter. Typical cost for this type of custom correction is $320-$520. We’ll measure your approach angle and show you exactly what we propose before we weld.
Ready to get your gate fixed right? Call Ironworks Gate Co. at (833) 754-7503 for a free estimate. A live person will answer, and we’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Windcrest and surrounding communities since 1984.