Gate Repair in Converse, TX
Gate repair in Converse typically runs $180-$520 depending on whether you’re dealing with a heaved post, a warped wood frame, or a failed opener motor. Most repairs we dispatch in the 78109 area are completed in a single visit, with the price agreed before any work begins. If your gate drags, binds, or won’t respond to the remote, call (833) 754-7503 and a live person will answer.
Why Converse Homes Are Different
Converse sits on heavy black expansive clay, the Vertisol soil that dominates northeastern Bexar County. It swells with spring rain, then shrinks and cracks through brutal summer drought. A post set to the shallow 1990s standard heaves and tilts within a single seasonal cycle. Add in the housing stock: most Converse homes are 1990s-2000s tract builds, and those original wood privacy gates are now hitting twenty to thirty years of age at the same time. The original hardware was rarely galvanized for our humidity, and the wood has dried and warped through two decades of Texas heat. We see the same pattern across Converse Heights, Woodlake, and the neighborhoods off FM 78.
Gate Repair in Converse
Gate repair in Converse means dealing with the clay first. A gate that drags or won’t latch is usually telling you the post has moved, not that the hinges are loose. We diagnose the root cause before we turn a bolt, and we quote the fix before we start. For a deeper look at how we approach repair work, see our Gate Repair service hub.
Post Reset
This is the repair we perform most often in Converse, because the clay never stops moving. The wet-dry cycle heaves posts out of plumb seasonally, and surface hinge tightening becomes a callback waiting to happen. We pull the post, deepen the concrete footing below the active shrink-swell layer, and reset everything square. Post reset with proper footing depth runs $320-$520.
Hinge Replacement
Hinges on Converse gates take abuse. Original 1990s hardware corrodes in high-humidity summers, rust sets in, and hinge pins freeze solid. Rental properties near Joint Base San Antonio-Randolph are especially prone: deferred maintenance across multiple tenant cycles leaves hinges cracked or pulling out of rotted wood. We replace with corrosion-resistant, heavy-duty hinges sized to the gate weight. Hinge repair or replacement runs $180-$280. We always check the post attachment before bolting anything up. A new hinge on a tilted post will fail again.
Why does my gate keep sagging even after I tighten the hinges?
The sag returns because the post beneath the hinges is moving. Converse’s heavy black clay swells when wet and shrinks when dry, tilting posts set too shallow by the original builder. We fix it by pulling the post, pouring a new footing below the active shrink-swell zone, and resetting plumb. Call (833) 754-7503 for an inspection.
Gate Installation in Converse
A new gate in Converse needs footings set below the clay’s active zone, or you’ll be calling us back in eighteen months. We standardize on deeper excavation for every installation, and we quote the full job before we start. Complete residential systems with posts, hardware, and automation typically run $2,800-$6,500. Our Gate Installation page covers the full scope of what we build.
Swing Gate Installation
Swing gates remain the most common request in Converse’s 1990s-2000s subdivisions, where driveway widths were designed for single or double leaf systems. The critical detail is post depth. A single swing driveway gate, manual, runs $2,800-$4,200; with automation, $4,500-$6,500. We excavate to 48 inches and pour below the shrink-swell layer, because the original tract builders rarely did.
Security Gate Installation
For Converse homeowners near Joint Base San Antonio-Randolph or along busier corridors like FM 78, a security gate adds controlled access without sacrificing curb appeal. Security gates with access control integration run $5,500-$10,000+ depending on materials and entry system. For military families who travel, we often recommend battery backup so the gate still works during a power outage.
Should I repair or replace my 25-year-old wood gate in Converse?
Replace it if the frame is warped, the posts are tilting, or the hardware has been patched more than once. Military rental turnover in Converse means deferred maintenance accumulates across tenant cycles, and band-aid repairs cost more over time than a proper installation. We’ll assess honestly and quote both options. Call (833) 754-7503.
Gate Motor & Opener in Converse
Gate motor repair in Converse typically costs $180-$420 and most calls are completed same-day when you reach us before noon. The original operators installed on 1990s tract homes are failing in a synchronized wave: capacitors dry out, gearboxes strip, control boards develop intermittent faults. See our Gate Motor & Opener hub for the full breakdown of what we service.
Motor Repair
A motor with solid mechanicals is often worth repairing. We diagnose whether the failure is a limit switch, capacitor, gear assembly, or the control board before recommending anything. Standard motor repair runs $180-$320; control board replacement runs $280-$450. We stock common failure parts for FAAC, BFT, and Viking systems on our Converse trucks, so many repairs are same-day.
Slide Motor Service
Slide gates in Converse suffer a failure pattern you won’t find in every Texas market. The clay heaves, the track shifts, and the motor strains until it faults out on overload. We reset posts and realign tracks, then check the motor for damage from the strain. Slide gate post reset and track realignment runs $340-$580. The fix is mechanical first, electrical second.
Why does my gate motor fail more often in late summer in Converse?
The combination of peak heat and clay shrinkage creates a one-two punch. August temperatures push motors already running at thermal limit into shutdown, while dried, contracted soil allows posts to tilt and bind the gate. The motor works harder against mechanical resistance in air that offers less cooling. We see a predictable spike in overload failures from late July through September. Call (833) 754-7503 if yours is struggling.
Gate Access Control in Converse
Access control in Converse carries an extra layer of turnover. Joint Base San Antonio-Randolph means PCS moves and rotating tenants, so keypads, remotes, and entry systems accumulate neglect that no single occupant feels responsible for. We repair and replace keypads, remotes, phone entry, and smart access. Our Gate Access Control hub covers what we install and service.
Keypad Entry
Keypads are the workhorse of Converse rental properties near the base. Weather-faded buttons, failed cover seals, corroded wiring: we replace them with sealed units rated for our humidity and temperature swings. Keypad repair or replacement runs $180-$420 including programming. We show you how to change the code yourself so you’re not calling us back for that.
Phone Entry
Phone entry systems let visitors call your cell from the gate, no code to share or remote to lose. For property managers handling frequent tenant changes, this eliminates code management entirely. A new phone entry system runs $680-$1,200 depending on whether we can use existing low-voltage wiring. We test signal strength at the gate before quoting.
Can you install smart access control on my 1990s wood gate in Converse?
Yes, if the gate structure is sound. We evaluate whether the frame is square and the posts are plumb before adding automation. Many 1990s Converse gates need the frame re-braced or a post reset in deeper concrete first. Smart access retrofit runs $340-$580 on a mechanically sound gate. Call (833) 754-7503 for an assessment.
Gate Parts & Welding in Converse
A sagging Converse gate that drags after every spring rain is rarely a hinge problem. It is a post problem, and the fix is usually welding or replacement parts installed below the clay line. We arrive with welders, posts, and hardware on the truck. Our Gate Parts & Welding hub lists the full scope of field work we handle.
Post Replacement
This is the fix that actually ends the recurring drag in Converse. We pull the post, deepen the footing past the active shrink-swell layer, and reset plumb. Post replacement runs $380-$650 for standard depth, or $550-$850 for deep-set below the clay layer. The original tract builders rarely followed this standard. We do, every time.
Field Welding
We bring mobile welding equipment to Converse properties and repair structural damage in place: cracked frames, broken pickets, failed original welds on estate gates, and custom mounting brackets for automation hardware. Simple field repairs start at $180; structural frame welding with finish grinding runs $320-$450 or more. We settle the price before we strike an arc.
Why does my gate keep binding after rains in Converse?
Your gate post is tilting in the expansive clay. Converse sits on heavy Vertisol soil that swells when wet and shrinks when dry, torquing posts out of plumb within a single season. The permanent fix is pulling the post and resetting it with a concrete footer below the active shrink-swell layer, typically 48 inches or deeper. Call (833) 754-7503 for an estimate.
Brands We Service in Converse
We’re trained and equipped on nine major opener brands, and our Converse trucks stock common failure parts for our brands including FAAC, BFT, and Linear. That means most motor and access control repairs finish in one visit.
Pricing for Gate Repair in Converse, TX
| Service | Typical range in Converse |
|---|---|
| Hinge repair / replacement (2-3 hinges) | $180 - $280 |
| Post reset with below-grade footing | $320 - $520 |
| Gate realignment (frame and hardware) | $220 - $380 |
| Mobile weld repair (crack / frame) | $200 - $340 |
| Opener diagnostic and repair | $180 - $420 |
| Full motor replacement with installation | $650 - $1,200 |
| Keypad repair / replacement | $180 - $420 |
| Seasonal Tune-Up | $89 (fixed) |
What pushes the price up in Converse is usually the clay: if your post needs resetting below grade rather than a simple hinge swap, the job includes excavation and new concrete. We inspect, diagnose, and quote before any work begins. The price we agree on is the price you pay.
Neighborhoods We Serve in Converse
Our service vehicles are stocked for same-day response across Converse, usually arriving within a few hours of your call. The areas we work most often:
- Converse Heights
- Woodlake
- The Oaks at Converse
- Live Oak corridor near FM 78
- Subdivisions off Gibbs Sprawl Road
Service Area - Cities Near Converse
Ironworks Gate Co. dispatches from our San Antonio office to Converse, TX daily, and we regularly serve the surrounding communities of Windcrest, TX, Universal City, TX, Kirby, TX, Live Oak, TX, and Selma, TX. Same-day and next-day scheduling is available throughout the area.
Serving Converse, TX - Our Local Coverage Area
Ironworks Gate Co. crews serve Converse and the communities around it; dispatch is coordinated from our San Antonio office. The map shows the Converse coverage area; if your address is on it, we can help.
Also serving nearby: Converse, TX, Windcrest, TX, Universal City, TX, Kirby, TX, Live Oak, TX, Selma, TX.
FAQs About Gate Repair in Converse
Yes, we regularly service rentals and duplexes near the base, working directly with property managers or tenants who have owner authorization. We understand PCS timelines and coordinate access, documentation, and billing to meet military housing requirements. Same-day scheduling is available when the gate is inoperable. Call (833) 754-7503 to arrange service.
That depends on your subdivision. Some Converse HOAs require design review before a visible gate replacement, while others only care about fence height and materials. We can provide a written estimate and material specifications for your HOA package. Repair work on an existing gate rarely needs approval. Call (833) 754-7503 and we’ll help you sort it out.
If your gate is sagging, binding, or refusing to open, call (833) 754-7503 for a free estimate. A live person answers 24 hours a day, and we’ll give you an upfront price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Converse Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer