Fast, Reliable Gate Parts & Welding Across Kirby
Gate parts and welding repair in Kirby typically runs $180-$650 depending on the component, and most jobs are completed in a single visit with upfront pricing settled before we start. We keep common hinges, rollers, and welding supplies stocked for the 78244 area, so Kirby homeowners aren’t waiting on parts shipped from out of state.
We’ve been serving the corridor between Kirby and Joint Base San Antonio-Randolph since 1984. Victor Salinas and our team know the tight alley-load driveways, the original wrought-iron gates on those 1950s-70s tract homes, and the way Bexar County clay heaves posts out of plumb after every dry spell. When a gate is dragging on concrete or a hinge pin has rusted through, we aim to be there the same day you call. A live person answers our phone 24 hours a day, 7 days a week - no voicemail, no callback queue. Reach us at (833) 754-7503 for a free estimate.
Why Ironworks Gate Co. Is Kirby’s Preferred Gate Parts & Welding Company
Kirby homeowners don’t have the patience for contractors who treat their city like an afterthought. We’re not driving in from Austin or Houston with a GPS and a guess. We know Kirby’s municipal code requirements are separate from San Antonio’s - a detail that trips up out-of-area crews who assume one permit covers both. That local knowledge saves our customers time, money, and the headache of a failed inspection.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands including FAAC, BFT, and Viking. Most repairs in Kirby are finished in one visit. Our written 90-Day Done Right Promise - the Keystone Standard - applies to every job, no paperwork, no arguing. If it’s not right, we come back and make it right.
We replaced a sagging hinge and welded a cracked rail on a heavy tubular steel driveway gate in the Oakwood Estates neighborhood near Randolph Blvd. The gate had been binding on the concrete driveway due to post shift from clay heave; we installed a new LiftMaster hinge set and re-plumbed the post with a concrete collar. Jobs like that are why Kirby residents call us back.
Our Gate Parts & Welding Services in Kirby
Hinge Replacement
Corroded hinge pins are the most common failure we see on Kirby’s older iron and steel gates. The 1950s-70s tract homes near Randolph AFB were built with wrought-iron driveway gates that have now seen sixty-plus years of Texas heat and humidity. When a hinge seizes or a pin shears, the gate sags, drags, and eventually binds against the driveway or frame. We stock heavy-duty replacement hinge sets rated for security-grade gates, and we match the hardware to your existing post and rail configuration. A typical hinge replacement in Kirby runs $180-$320.
Post Replacement
Kirby’s Blackland Prairie clay soils expand and contract dramatically with the wet-dry cycle. After a heavy rain or a prolonged drought, gate posts heave out of plumb. We’ve re-set posts on homes near Cibolo Creek that had leaned three inches off vertical, causing the gate to gap at the latch side or scrape concrete. We excavate, set a new post in concrete with proper drainage, and realign the gate to swing true. Post replacement in Kirby typically costs $350-$650 depending on depth, concrete collar size, and whether the post is steel or masonry-embedded.
Rail Repair
Cracked or bent rails weaken the whole gate structure. On Kirby’s antique wrought-iron gates, we often find stress fractures where the rail meets the stile, or where a vehicle has backed into the lower rail. Our mobile welding rig lets us repair most cracks in place without removing the entire gate - critical on tight Kirby lots where there’s nowhere to lay a sixteen-foot driveway panel flat. We grind, weld, and finish to match the existing metal. Rail welding and reinforcement in Kirby generally runs $220-$450.
Custom Welding
Not every gate failure fits a catalog part. We fabricate custom brackets, gussets, and reinforcement plates for gates that have been modified over decades or built by a long-retired local welder. Our Gate Parts & Welding team carries mild steel, stainless, and aluminum rod stock, and we weld on-site for Kirby customers who can’t afford downtime on a security entrance. Custom welding projects start around $280 and scale with material and complexity.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kirby
We maintain factory-trained certification and local parts inventory for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Kirby’s security-conscious households near Randolph, we see a lot of Viking and FAAC commercial-grade operators on estate entrances, and BFT linear actuators on swing gates with tight clearance. Stocking parts locally means we don’t tell you to wait two weeks for a receiver board or hinge kit. Most brand-specific repairs in Kirby are diagnosed and completed in the first trip.
Common Gate Parts & Welding Problems We See in Kirby Homes
- Clay heave shifts posts out of plumb. Kirby’s Houston Black clay soils swell when wet and shrink when dry. We’ve re-leveled gates on three consecutive homes on the same street after a single rainy season, each post tilted a different direction by soil pressure.
- Corroded hinge pins and rollers on 1960s iron gates. The original hardware on Kirby’s tract-home gates was never meant to last sixty years. Pins seize, bushings wallow out, and rollers flat-spot from carrying weight they weren’t sized for.
- DIY remote installs miswired near Randolph. Active-duty households often buy rolling-code remotes online and wire receivers themselves. We’ve traced intermittent failures to reversed polarity, inadequate grounding, or incompatible frequency boards - all fixable in one visit if diagnosed correctly.
- Summer heat warps wooden gate frames and accelerates rust. When Kirby hits 103°F for a week straight, uncoated steel hardware oxidizes fast and wood gates twist out of square. We see a spike in binding and latch-alignment calls every August.
Pricing for Gate Parts & Welding in Kirby, TX
We don’t quote blind over the phone, but we’ve done enough work in the 78244 ZIP to give you honest ranges for what we typically see:
| Service | Typical Range in Kirby |
|---|---|
| Hinge replacement (single) | $180 - $320 |
| Roller/ wheel replacement (set) | $150 - $280 |
| Rail weld repair (in-place) | $220 - $450 |
| Post replacement (single, with concrete) | $350 - $650 |
| Custom welding / fabrication | $280 - $600+ |
| Latch and lock replacement | $140 - $260 |
What moves the number: gate material (wrought iron vs. tubular steel vs. aluminum), access for our welding rig, whether the post has heaved and needs re-plumbing, and whether automation components are involved. We settle the full price before we start - a square deal, no surprises on the bill. Call (833) 754-7503 for a free, no-pressure estimate at your Kirby property. Mention our $50 off any repair over $250, or ask about our $89 Seasonal Tune-Up if your gate is showing early wear.
We Also Serve Cities Near Kirby
Our service radius covers the full Bexar County corridor east of San Antonio. We regularly handle Gate Parts & Welding in Kirby and neighboring Windcrest, Converse, Live Oak, and Universal City. Same-day response, same upfront pricing, same written guarantee - whether you’re inside Kirby’s enclave boundaries or just across the line in Windcrest.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Kirby
Yes. Kirby is a fully independent municipality surrounded by San Antonio, and it maintains its own municipal code and permitting process for gate installations and structural repairs. Out-of-area contractors often assume San Antonio permits apply, which causes delays and failed inspections. Our team has worked with Kirby’s permitting office for years and files correctly the first time. Call (833) 754-7503 if your project may require a permit - we’ll verify and handle the paperwork.
The hinge pin or bushing is almost always the culprit on Kirby’s vintage gates. Sixty years of heat cycling and corrosion wear the pin oval or seize it entirely, letting the gate drop on the frame. We replace with a sealed, greasable hinge set rated for the gate’s actual weight. In most cases the repair is same-day and costs $180-$320. Call for a free look - estimates are free.
Usually, yes. Our mobile welding rig is built for in-place repairs on tight lots where there’s no room to lay a gate flat. We grind the crack, weld with matching rod, and dress the joint to blend. For Kirby’s older ornamental iron, we take care not to disturb original scrollwork or patina. Most rail welds run $220-$450 and are completed in one visit. Call (833) 754-7503 to schedule.
It could be the receiver, but it could also be a miswired rolling-code remote or a frequency mismatch. We see this often near Randolph where homeowners install aftermarket remotes themselves. Our techs carry LiftMaster diagnostic tools and replacement receiver boards, and we test before replacing. Receiver replacement in Kirby typically runs $180-$340 including programming. Call for same-day service.
Your posts are sitting in expansive Blackland Prairie clay that swells when wet and shrinks when dry. Near Cibolo Creek, the soil moisture fluctuates even more sharply, exerting lateral pressure that pushes posts out of plumb. We re-set posts with deeper embedment, proper drainage gravel, and a wider concrete collar to resist heave. Post replacement near the creek runs $350-$650 and carries our 90-Day Done Right Promise. Call (833) 754-7503 for an assessment - estimates are free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kirby since 1984.