Fast, Reliable Gate Installation Across Kirby
A new gate installation in Kirby typically runs $2,800-$6,500 for a standard residential driveway gate, with most projects completed in one to two days. Ironworks Gate Co. has been serving the Kirby area since 1984, and we know the local conditions that make or break a gate job here: the shifting Blackland Prairie clay soils, the tight alley clearances common in older neighborhoods, and the separate municipal code requirements that out-of-area contractors regularly miss. If you’re in 78244 and need a gate that opens smoothly year-round, call us at (833) 754-7503. A live person answers 24 hours a day, and we’ll give you an upfront price before we turn a single bolt.
Kirby sits fully surrounded by San Antonio, but it’s its own municipality with its own rules. That distinction matters when you’re installing an automatic gate. We’ve seen too many jobs where a contractor pulled a San Antonio permit, only to have Kirby code enforcement flag the installation. Our Gate Installation team handles Kirby’s permitting process directly, so your gate passes inspection the first time.
Why Ironworks Gate Co. Is Kirby’s Preferred Gate Installation Company
We’ve been working in Bexar County for over 42 years, and the Kirby jobs keep coming because we don’t cut corners on the details that matter here. Our technicians are background-checked, uniformed, and trained on nine automation brands, including Linear, Viking, and Ghost Controls, so we stock the parts that Kirby gates actually need.
Homeowners in Kirby remember who shows up when they say they will. We will be there when we say. Most installations finish in a single visit. Our written 90-Day Done Right Promise, the Keystone Standard, applies to every job with no paperwork and no arguing. If it’s not right, we come back and make it right.
We recently installed a pair of LiftMaster rolling-code security gate openers at a townhome complex on FM 78 in Kirby. The tight alley clearance required us to mount the operators on custom brackets to avoid interfering with adjacent units, and we programmed each remote to a unique rolling code for resident security. That’s the kind of field problem-solving Kirby properties demand.
Our Gate Installation Services in Kirby
Swing Gate Installation in Kirby
Swing gates remain the most common request we get in Kirby’s 1950s-1970s neighborhoods, where modest lot sizes and established driveways suit a traditional inward- or outward-swinging design. The trouble is Kirby’s expansive clay soils. After every heavy rain or extended dry spell, we see posts heave out of plumb and gates start to bind against the ground or gap at the latch. We set our swing gate posts deeper than spec, with reinforced concrete footings that resist the soil movement. For homes on streets like Ackerman Road or Seguin Road, where the original 1960s iron gates have sagged beyond repair, we fabricate custom steel replacements that match the neighborhood character.
Security Gate Installation in Kirby
Kirby’s proximity to Joint Base San Antonio-Randolph creates a concentration of active-duty and veteran households who prioritize functional security over ornamentation. We’ve installed security gates for rental properties near the base, for multigenerational family compounds, and for homeowners who simply want controlled access. Our security gate installations include rolling-code remotes, keypad entry, and intercom systems. We recently fitted a property on FM 78 with a Ghost Controls operator and a DoorKing keypad, giving the owner remote access from their phone and visitor codes they can change monthly. Summer heat in Kirby regularly tops 100°F, so we specify hardware with proper powder coating and UV-stable components that won’t rust or degrade.
Driveway Gate Installation in Kirby
The typical Kirby driveway gate spans 12 to 16 feet for a single opening or pairs to 20 feet for a double swing. Many homes in 78244 already have the iron or steel frame from a previous installation, but the hinges have corroded, the posts have rotted at ground level, or the automation was never properly integrated. We assess what’s salvageable and what’s not. If the existing gate is structurally sound, we’ll refit it with new hardware and a modern operator. If it’s too far gone, we build a replacement that fits the opening exactly, accounting for the slope, the setback from the street, and Kirby’s setback requirements. Our Kirby customers get the same upfront pricing whether we’re retrofitting or starting fresh.
Sliding Gate Installation in Kirby
Sliding gates make sense on Kirby properties where a swing gate would block the sidewalk or where the driveway angles sharply from the street. The sliding track must be perfectly level, which is challenging on older driveways that have settled unevenly over sixty years. We pour a dedicated concrete track pad where needed, and we specify V-track or cantilever systems based on the grade and the available slide clearance. For townhome complexes and duplexes near FM 78, where parking is tight and every inch of clearance matters, sliding gates often prove the only practical solution.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kirby
Ironworks Gate Co. is trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Kirby customers, this means we don’t guess at what’s wrong or order parts that take a week to arrive. We stock Linear and Viking operators and common Ghost Controls components locally, and our technicians carry DoorKing keypads and access hardware on their trucks. The correct fix gets made on the first visit. That’s how most of our Kirby installations finish in a single day.
Common Gate Installation Problems We See in Kirby Homes
- Clay soil heaving shifts posts out of plumb. Kirby’s Bexar County clay expands when wet and contracts during drought, tilting gate posts and causing swing gates to bind or drag. We install deeper footings with proper drainage to counter this cycle.
- Original 1950s-1970s iron gates corrode at hinges and latch points. These older gates often look sound from the street but have hollowed pivot pins or cracked welds at the stress points. We reinforce or replace as needed.
- Summer heat warps wooden gate frames and accelerates rust. Unprotected steel hardware in Kirby’s 100°F-plus summers develops surface rust in a single season. We specify powder-coated or galvanized components for every installation.
- Out-of-area contractors miss Kirby’s separate permitting. Kirby’s municipal code for automatic gates differs from San Antonio’s, and we’ve been called in to fix installations that failed inspection because the original contractor filed the wrong permit.
Pricing for Gate Installation in Kirby, TX
A typical swing gate installation in Kirby runs $2,800-$4,200 for a standard single gate with manual operation, and $4,500-$6,500 when you add automation, keypad access, or custom fabrication. Sliding gates typically start around $3,800 and range to $7,200 depending on track length, motor size, and access controls. Security-focused installations with rolling-code remotes and intercom systems fall in the $5,200-$8,500 range.
What moves the price: the condition of existing posts and footings, whether we need to pour new concrete, the automation brand and features you choose, and any custom welding or fabrication to match an existing style. We settle on an upfront price before we start. No surprises on the bill. Call (833) 754-7503 for a free estimate at your Kirby property.
Standing offers for Kirby homeowners: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Kirby
Our service area covers the full Bexar County corridor surrounding Joint Base San Antonio-Randolph, including Windcrest, Converse, Live Oak, and Universal City. If you’re just outside Kirby city limits or managing properties across multiple municipalities, the same crew that knows Kirby’s code requirements handles your job. One call, one consistent standard.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kirby
Yes. Kirby is a separate municipality from San Antonio and maintains its own building code and permitting process for automatic gate installations. Out-of-area contractors frequently file San Antonio permits that don’t satisfy Kirby inspectors. Our team handles Kirby permitting directly on every job, so your installation passes the first time. Call (833) 754-7503 and we’ll confirm exactly what’s needed for your property.
Linear and Ghost Controls operators with low-profile mounting brackets work best for Kirby’s tight alley clearances, where a standard arm would interfere with adjacent units or parked vehicles. We recently installed custom-bracketed LiftMaster rolling-code openers on FM 78 for exactly this situation. For your specific clearance, we’ll measure on-site and recommend the right fit. Call (833) 754-7503 for a free assessment.
Yes. We regularly replace sagging original iron gates in Kirby’s 1950s-1970s tract homes, particularly in the 78244 ZIP. We can fabricate a custom steel replacement that matches your existing style, or reinforce and refit the original frame if the metal is still structurally sound. We’ll assess it in person and give you both options with upfront pricing. Call (833) 754-7503 to schedule a look.
Yes. We install rolling-code remotes on every security gate installation in Kirby, and we can retrofit them to most existing operators. Each remote transmits a unique code per use, preventing code-grabbing theft. We program individual remotes for each resident and can set temporary visitor codes on compatible keypad systems. Call (833) 754-7503 to add rolling-code security to your gate.
Most Kirby security gate installations are completed in one to two business days from permit approval, with same-week scheduling available for urgent situations. We carry Linear, Viking, and Ghost Controls operators and DoorKing access hardware on our trucks, so we’re not waiting on parts. For rental properties near Randolph AFB, we understand tenant turnover timelines and coordinate installation accordingly. Call (833) 754-7503 for availability.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kirby and Bexar County since 1984.