Fast, Reliable Gate Parts & Welding Across Keene
Gate parts and welding repair in Keene typically runs $180-$650 depending on the job, and most calls are completed in a single visit. Our Gate Parts & Welding team carries heavy-duty hinges, schedule 40 steel posts, and welding equipment on every truck, so we don’t leave your property to chase parts.
We’ve been driving out to Keene from our dispatch routes for over four decades. We know the difference between a decorative driveway gate off Old Betsy Road and a working livestock gate on acreage near Hilltop Drive. The hardware isn’t interchangeable, and the fix isn’t the same. When a gate sags or a post leans in Keene, it’s usually the black clay soil doing the damage, not the gate. We bring the right materials and the right know-how so your gate closes square and stays that way. Call (833) 754-7503. A live person answers, day or night.
Why Ironworks Gate Co. Is Keene’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has served Johnson County since 1984. In Keene, that means we’ve welded hinges on pipe-rail gates near Southwestern Adventist University and replaced posts on acreage properties stretching toward Cleburne. Our technicians are background-checked, uniformed, and trained on nine automation brands including Linear, Viking, and Ghost Controls.
Keene property owners tell us the same thing: the last guy didn’t bring the right hinges, or he had to come back twice, or the post he set started leaning again inside of six months. We don’t work that way. Our 90-Day Done Right Promise, the Keystone Standard, covers every job in writing. If it isn’t right, we come back and make it right. No paperwork to file, no argument.
Because Keene’s community observes Saturday Sabbath, weekend emergency calls here concentrate almost entirely on Sundays. We answer the phone 24 hours a day, 7 days a week, but we’re also respectful of local custom. We won’t schedule follow-up calls or outreach on Saturdays with property owners or university staff who observe. That’s the kind of local knowledge you earn from four decades on these roads.
Most Keene calls reach us within 45 minutes to an hour. We settle on an upfront price before we turn a single bolt. No surprises on the bill.
Our Gate Parts & Welding Services in Keene
Hinge Replacement
Standard homeowner-grade hinges fail fast on Keene’s heavier gates. A 14-foot pipe-rail livestock gate off FM 2280 can weigh 600 pounds or more. The pin-style hinges from big-box stores aren’t rated for that load. We stock and fabricate heavy-duty strap hinges rated for 800-pound gates, with grease fittings and proper thrust bearings. We match the hinge to the gate, not the other way around. In Keene, where self-reliant homeowners often try twice with undersized hardware before calling, we make sure the third time is the last time.
Post Replacement
Johnson County’s expansive black clay soils swell after spring rains and shrink to cracked hardpan by August. That seasonal cycle heaves gate posts two to four inches, leaning them until the gate drags or swings open on its own. Post replacement in Keene isn’t just digging a hole. We remove the old post, excavate to 48 inches minimum, and set schedule 40 steel with concrete belled footings that resist the uplift. We serviced a heavy pipe-rail livestock gate on a 5-acre property off Hilltop Drive; the gate’s 12-foot tube-steel frame had sagged due to seasonal soil heave, requiring us to remove and re-plumb the 4-inch schedule 40 steel posts 48 inches deep with concrete belled footings, then replace the worn hinge brackets with custom-welded heavy-duty strap hinges rated for 800-pound gates. That gate still swings true three years later.
Rail Repair
Bent or cracked rails on pipe-rail and tube-steel gates are common where cattle press against them or where ATVs clip the corners. We cut out the damaged section, prep the joint, and weld in matching material with proper penetration and finish. For gates near SWAU campus or along Old Betsy Road, we can match existing rail profiles so the repair doesn’t stand out. We also brace sagging frames with welded diagonal tension bars that keep the gate square under load.
Custom Welding
Not every gate in Keene came from a catalog. Farm and ranch gates often have non-standard dimensions, homemade latch mechanisms, or repairs layered on by previous owners. Our welding fabricates custom hinge brackets, extended latch arms, receiver hitches for portable panels, and reinforcement gussets for gates that have outlived their original design. We weld in the field with 220V portable rigs, so the gate stays on its posts while we work. Custom welding in Keene typically runs $240-$480 depending on material and access.
Gate Rollers, Latches & Locks
Sliding gates on rural Keene properties rely on V-groove or flat-bottom rollers that take a beating from dust, manure acids, and irregular track. We stock sealed-bearing replacements and can fabricate new roller brackets when the originals have worn oval. For latches and locks, we install everything from simple drop-rope latches for pasture gates to keyed-alike deadbolts for estate entrances near the university.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keene
We carry parts and provide certified service on nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Keene customers, that means we don’t order parts from Dallas and make you wait. Our trucks stock common Linear and Viking control boards, Ghost Controls actuator arms, and DoorKing loop detectors. When a gate opener on a rural Keene property stops halfway, we diagnose whether it’s a failed motor capacitor, a pinched low-voltage wire from gopher damage, or a logic board issue, and we fix it on the spot. Most automation repairs in Keene run $220-$450, with same-day completion on nine out of ten calls.
Common Gate Parts & Welding Problems We See in Keene Homes
- Black clay soil heave tilts posts seasonally. Johnson County’s expansive soils swell and shrink with moisture, leaning gate posts until the gate drags or won’t latch. Post re-plumbing with deep-set concrete footings is the only lasting fix.
- Oversized rural gates destroy standard hinges. Fourteen-foot pipe-rail gates common on Keene acreage stress homeowner-grade hardware beyond its rating. Hinge pins shear within one to two years. Heavy-duty fabricated strap hinges are the correct specification.
- Self-reliant repairs with undersized hardware fail twice. We see this often: a property owner installs a hinge from the farm supply store, it sags again in months, and the repeated stress ovalizes the bolt holes. One professional trip with properly rated hardware ends the cycle.
- Automatic openers strain on unlevel gates. When soil heave drags a gate, the opener works harder, overheats, and fails prematurely. We fix the gate geometry first, then address the motor.
Pricing for Gate Parts & Welding in Keene, TX
Here is what gate parts and welding work costs in the Keene market. These are actual ranges based on jobs we’ve completed in ZIP 76059 and surrounding Johnson County acreage:
| Service | Typical Range in Keene |
|---|---|
| Hinge replacement (standard duty) | $180-$280 |
| Hinge replacement (heavy-duty/custom welded) | $280-$420 |
| Post replacement (single, with concrete footing) | $340-$650 |
| Rail repair / section weld | $200-$380 |
| Custom welding (field fabrication) | $240-$480 |
| Gate roller replacement | $160-$290 |
| Latch / lock installation | $140-$260 |
What moves the price: depth of post setting needed in black clay soil, accessibility for the welding rig, whether the gate can be repaired in place or must be removed, and the gauge of steel being worked. We give you an upfront price before starting. Estimates are free. Active offers include $50 off any repair over $250, a free second opinion on any written estimate, our $89 seasonal tune-up, and a standing 5% senior and veteran discount.
We Also Serve Cities Near Keene
Our service area covers all of Johnson County and into southern Tarrant County. We regularly run Gate Parts & Welding in Keene along with calls to Cleburne, Joshua, Burleson, and Crowley. Each city has its own soil conditions and gate types. Cleburne’s newer subdivisions lean toward ornamental iron and aluminum automation. Burleson sees more HOA-specified driveway gates. Keene’s rural acreage and institutional properties demand a different approach entirely. We bring the right equipment for whichever town we’re in.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Keene
Your gate post is heaving in the black clay soil. Johnson County’s expansive clays swell with spring moisture and lift the post, then shrink in summer drought and let it settle crooked. The gate frame is probably straight; the post is the problem. We re-plumb with 48-inch depth and concrete belled footings that resist the seasonal cycle. Call (833) 754-7503 for a free look.
Yes. We fabricate strap hinges rated to 800 pounds with grease fittings and thrust bearings, sized to your gate’s actual weight and swing geometry. Standard catalog hinges fail on Keene’s working livestock gates. We measure, cut, and weld on site. Most custom hinge jobs run $280-$420 and finish in one visit.
Usually, yes. We carry common V-groove and flat-bottom rollers, and when the bracket or axle is non-standard, we fabricate a matching mount in the field. Bring a photo or the old roller if you have it. We’ll measure and weld a replacement that fits your track without modifying the gate frame.
We answer the phone 24 hours a day, 7 days a week, but we schedule Saturday service calls with care in Keene. Many property owners and university staff observe Saturday Sabbath, so our weekend emergency work in Keene concentrates on Sundays. If Saturday is genuinely urgent and acceptable to you, we’ll come. Otherwise, we respect the local practice and schedule for Sunday or weekday. Just tell us your preference when you call.
It could be either, or it could be the gate binding due to post lean. We test the motor amp draw, inspect the control board for fault codes on brands like Linear, Viking, or Ghost Controls, and check for pinched low-voltage wire from rodents or erosion. If the gate drags, we fix the geometry first. Diagnosis is part of every service call. Most opener repairs in Keene run $220-$450. Call (833) 754-7503 and we’ll sort it out in one trip.
Ready to get your gate working right? Call Ironworks Gate Co. at (833) 754-7503 for a free estimate. A live person will answer, we’ll give you an upfront price, and we’ll be there when we say. Every job is backed by our written 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keene and Johnson County since 1984.