Fast, Reliable Gate Parts & Welding Across Joshua
Gate parts and welding repair in Joshua, TX typically runs $180-$650 depending on the component, and most jobs are completed in a single visit with upfront pricing settled before work begins. Our Gate Parts & Welding team carries hinge kits, post anchors, rollers, and welding equipment on every truck, so we rarely need a second trip.
We have been driving out to Joshua since the early 1990s, back when the stretch along US-67 was mostly open prairie and a few FM-road farmsteads. Today we service the newer acreage subdivisions near Joshua High School, the ranchette communities spreading toward Keene, and the older properties along the county roads that still run on original pipe and wooden gates. Wherever you are in the 76058 zip code, a live person answers our phone at (833) 754-7503, day or night, and we will give you a straight arrival window.
Why Ironworks Gate Co. Is Joshua’s Preferred Gate Parts & Welding Company
Joshua homeowners know the difference between a company that shows up and one that strings them along. We have earned our reputation here job by job, gate by gate, for more than four decades. Our technicians are background-checked, uniformed, and trained to work in your home the way they would work in their own mother’s.
We regularly hear from Joshua customers who had a handyman or one-truck operator disappear mid-repair. That does not happen with Ironworks. Our 90-Day Done Right Promise, the Keystone Standard, is written on every invoice. If something is not right, we come back and make it right. No paperwork to file, no argument, no exceptions.
Most calls from Joshua reach us within two rings, not two hours. Our dispatch routes trucks from the Burleson and Cleburne corridors, so we can usually be on-site in Joshua the same day you call. We know which gates on the newer ranchette lots were hung with builder-grade hardware that will not survive a Johnson County summer. And we know which older properties along FM 917 still run gates from the 1970s that need a careful weld rather than a reckless replacement.
Our Gate Parts & Welding Services in Joshua
Hinge Replacement
Joshua’s ornamental iron gates, especially the heavy builder-grade units installed on 2000s-2010s ranchettes, stress their hinges in ways that lighter residential gates never do. The weight of a 16-foot double swing gate, combined with posts that shift in Blackland Prairie clay, grinds hinge pins and elongates bolt holes within three to five years. We stock heavy-duty ball-bearing hinges, greaseable barrel hinges, and j-bolt kits sized for the gate weight we actually see in Joshua. A typical hinge replacement on a standard residential gate in Joshua runs $180-$320. For heavier estate gates, $340-$480.
Post Replacement
This is the repair we perform most often in Joshua, and it is almost always the clay soil’s fault. North Texas shrink-swell soils absorb spring rain and then crack and contract through summer droughts that push past 100°F. Gate posts heave, lean, and twist. The automatic operator, still trying to open and close on schedule, strains against a frame that is no longer square. We set replacement posts on concrete piers that extend below the active soil zone, using galvanized or powder-coated steel for the posts that will carry automatic operators. In Joshua’s newer subdivisions, we also find that original posts were set too shallow by builders rushing to close out acreage lots. A post replacement in Joshua typically costs $380-$650, including removal, proper depth setting, and rehang of the existing gate if it is salvageable.
Rail Repair
Ornamental iron rails on Joshua properties take a beating from two directions: the thermal expansion of hot Johnson County summers, and the impact stress when a heaved post throws the gate frame out of alignment. We see cracked welds at rail-to-picket joints, bent horizontal rails from vehicles brushing too close on narrow ranchette driveways, and rust-through at the base of lower rails where irrigation spray collects. Our mobile welding rig carries a Miller 211 MIG unit and 6011 stick electrodes for field repairs on steel and iron. Most rail repairs in Joshua run $220-$450 depending on linear feet and whether we are patching or replacing a full rail section.
Custom Welding
Not every gate in Joshua came out of a catalog. The older pipe-ranch gates along FM-road properties, the estate entrances with family initials or ranch brands, and the reinforced frames needed for high-wind exposure all demand welding that matches the original craft. We fabricate and weld gate extensions, operator mounting brackets, and reinforcement gussets in the field. Our welders are certified for structural steel and ornamental iron. Custom welding in Joshua starts at $280 for simple bracket fabrication and runs to $650 or more for extensive frame reinforcement or custom entry fabrication.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Joshua
We stock parts and carry factory-authorized service training for nine gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Joshua customers, this means the correct part is identified on the first visit, not ordered after a guessing game. We keep common Viking and Ghost Controls operator components on our trucks, along with Elite control boards and DoorKing safety loops. If your gate runs on a brand we do not stock locally, we will tell you upfront and source it with a clear timeline, not string you along while your gate sits open.
Common Gate Parts & Welding Problems We See in Joshua Homes
- Posts that lean within a year of replacement. The original installer set the post in a standard concrete footer above the active clay zone. In Joshua, that footer becomes a lever the soil pushes around. We set posts on piers that extend 36 inches or deeper, below the seasonal moisture variation.
- Automatic gate motors burning out on slide gates. We recently replaced a burned-out FAAC slide-gate operator on a ranchette off US-67; the original concrete pad had tilted from clay movement, binding the gate. We leveled the pad and upgraded to a heavy-duty model with a cold-weather kit. This is a defining failure pattern in Joshua’s newer acreage subdivisions.
- Welds snapping on ornamental iron after winter ice. The February 2021 freeze hit Johnson County hard. Thermal shock from rapid temperature drop makes brittle the heat-affected zone of older welds. We repair with proper preheat and low-hydrogen rod to prevent recurrence.
- Builder-grade gate rollers failing on heavy double gates. The nylon rollers originally installed on many Joshua ranchette gates were sized for lighter duty. We upgrade to sealed steel or UHMW polymer rollers rated for the actual gate weight, which in Joshua often exceeds 400 pounds per leaf.
Pricing for Gate Parts & Welding in Joshua, TX
We do not play pricing games. Every Joshua customer gets a written, itemized estimate before we start, and that price does not change unless you ask for additional work.
| Service | Typical Range in Joshua |
|---|---|
| Hinge replacement (standard residential) | $180 - $320 |
| Hinge replacement (heavy estate gate) | $340 - $480 |
| Post replacement with proper pier | $380 - $650 |
| Rail repair / weld patch | $220 - $450 |
| Custom welding / fabrication | $280 - $650+ |
| Gate roller upgrade (per gate) | $160 - $290 |
| Latch and lock replacement | $140 - $260 |
Factors that move the needle: gate weight and material, whether the post footing requires excavation below the clay active zone, accessibility for our welding rig, and whether the gate is automated (operator removal and reinstallation adds labor). We offer $50 off any repair over $250, a permanent 5% Senior and Veteran discount, and free second opinions on any written estimate you have received elsewhere. Call (833) 754-7503 for an exact quote. Estimates are free.
We Also Serve Cities Near Joshua
Our trucks cover the full Johnson County corridor and beyond. If you are in Joshua, Keene, Burleson, Crowley, or Cleburne, the same live-answer phone line, same-day scheduling, and same written 90-Day Done Right Promise apply. No service territory premiums, no rural upcharges.
Serving Joshua, TX - Our Local Coverage Area
We’re based in the Joshua area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Joshua
They were almost certainly set in a standard concrete footer that sits within Joshua’s active clay soil layer. Blackland Prairie shrink-swell soils move posts seasonally. We set replacement posts on piers that extend at least 36 inches deep, below the zone where moisture changes cause expansion and contraction. Call (833) 754-7503 and we will assess your post depth and give you a permanent fix, not another temporary one.
Yes, and we will also find out why it burned out. In Joshua’s acreage subdivisions, the most common cause is a tilted or heaved concrete pad that binds the gate, forcing the motor to overwork every cycle. We recently replaced a burned-out FAAC slide-gate operator on a ranchette off US-67; the original concrete pad had tilted from clay movement, binding the gate. We leveled the pad and upgraded to a heavy-duty model with a cold-weather kit. Motor replacement with pad leveling in Joshua typically runs $480-$890. Call (833) 754-7503 for a same-day assessment.
Sealed steel or UHMW polymer rollers rated for at least 500 pounds per wheel. The builder-grade nylon rollers originally installed on many Joshua ranchettes degrade in UV and flat-spot under weight. We measure your gate weight and track width, then install rollers that match the actual load. Most roller upgrades in Joshua cost $160-$290 per gate. Call (833) 754-7503 for sizing.
Yes. Sagging is usually a post or hinge problem, but if the gate frame itself has twisted or the horizontal rails have bowed, we can weld in diagonal tension rods, gusset plates, or full replacement rails. We match our weld process to the original metal. Ornamental iron gets low-hydrogen stick or MIG with proper preheat; pipe gates get 6011 root passes and 7018 fill. Custom welding in Joshua starts at $280. Call (833) 754-7503 for an on-site evaluation.
We replace the latch mechanism with a cold-weather-rated unit and, if needed, weld a reinforced strike plate that will not tear out under impact. Joshua’s ice events, like the February 2021 freeze, often reveal that original latches were never sized for thermal shock or the binding that occurs when frames shift. We also check whether your gate frame is square after the storm stress. Latch and lock replacement in Joshua runs $140-$260. Call (833) 754-7503; we can usually secure your gate same day.
A live person answers our phone 24 hours a day, 7 days a week. If your gate is stuck open, binding, or making noises it never made before, call Ironworks Gate Co. at (833) 754-7503. We will give you a straight arrival window, a written upfront price, and a repair backed by our 90-Day Done Right Promise. Done right, and backed in writing. That is the only way we know how to work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Joshua and Johnson County since 1984.