Fast, Reliable Gate Motor & Opener Across Kennedale
Gate motor and opener repair in Kennedale typically runs $180-$650 depending on whether you need a simple limit-switch adjustment or a full operator replacement, and most jobs are completed in a single visit. We’re familiar with the specific demands of Kennedale properties, from heavy welded pipe ranch gates on acreage lots along East Sublett Road to automated ornamental driveway gates in newer subdivisions near Kennedale New Hope Road. Our Gate Motor & Opener team carries the parts and tools to handle both on the same day. Call (833) 754-7503 and a live person will answer, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Motor & Opener Company
We’ve been serving the Kennedale area since 1984, long enough to remember when much of 76060 was still open pasture. That history matters when your technician recognizes the difference between a standard suburban gate and a working ranch entry that needs to hold livestock.
Our Kennedale customers tell us they chose us because we show up when we say we will, we diagnose the actual problem rather than guessing, and we stand behind the work. The 90-Day Done Right Promise applies to every job in Kennedale - written, no paperwork to file, no arguing. If it is not right, we come back and make it right.
Response time to Kennedale is typically same-day or next-day, depending on when you call. We’re coming from our base with direct routes via Interstate 20 and New Hope Road, so we’re not crossing three counties to reach you.
Our technicians are background-checked, uniformed, and trained on nine automation brands. They work by the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th Kennedale job gets the same care as the first.
Our Gate Motor & Opener Services in Kennedale
Motor Installation
New gate motor installation in Kennedale requires different thinking depending on your property. On the older ranchette properties along Kennedale’s southern and eastern edges, we frequently find H-brace pipe gates that were originally set by the landowner decades ago with posts sunk in caliche rather than poured concrete. That shortcut works until the Blackland Prairie’s expansive clay starts cycling through wet and dry seasons. We reset those posts to code footing depth with concrete before installing the operator, so the motor is not fighting a sagging gate six months later. For newer subdivisions, we install operators matched to your gate weight and cycle frequency. A typical new motor installation in Kennedale runs $450-$1,200 for residential swing or slide operators, including basic wiring and two remotes.
Motor Repair
Motor repair is our most common call in Kennedale, and most are finished in one trip. The heat is hard on equipment here. Summer temperatures regularly exceed 100°F, degrading operator lubricants and causing metal-on-metal binding in automated sliding gate tracks. We see burned-out capacitors, stripped worm gears, and limit switches knocked out of alignment by repeated post shifting. Our trucks stock replacement parts for Viking, Ghost Controls, DoorKing, and Elite operators, plus common components for LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Motor repair in Kennedale typically costs $180-$340 for standard fixes, $350-$650 if the gearbox or circuit board needs replacement. We diagnose before we quote, and the price is settled before we turn a bolt.
Linear Motor
Linear motors are a practical choice for Kennedale’s many single-swing gates on ranch properties, where a clean installation without exposed chain or belt makes sense. These operators mount directly to the gate and post, pushing and pulling through a telescoping arm. They work well on heavy-gauge pipe gates when the post is plumb and the hinge geometry is correct. We recently serviced a heavy-duty Slide Motor on a 16-foot welded pipe gate along East Sublett Road. The caliche-set H-brace had shifted after the summer drought, binding the track; we reset the posts to code depth with concrete and installed a new FAAC 740 operator, returning the gate to smooth operation in one trip. Linear motor installation or replacement in Kennedale generally runs $380-$950.
Slide Motor
Slide motors are essential for the wide ranch gates common in Kennedale’s acreage properties, where a swing gate would require too much radius or risk contact with a sloped drive. These operators pull the gate along a track using a chain or rack-and-pinion drive, and they must be precisely aligned to avoid binding. The combination of heavy steel gates and shifting black clay soils makes slide motor service particularly demanding here. We see track misalignment, worn rollers, and motor strain from gates that have gradually sagged or twisted. Our slide motor service includes full track inspection and adjustment, not just swapping the operator. Expect $420-$1,100 for slide motor work in Kennedale, depending on track condition and operator size.
Battery Backup
We strongly recommend battery backup for every gate opener we install or service in Kennedale. Power outages during severe weather are common in this part of Tarrant County, and a gate without backup leaves you either locked out or unable to secure your property. Battery backup systems typically add $180-$280 to the installation and provide 24-48 hours of normal operation without grid power. For properties with livestock or security concerns, it is not an optional extra. It is standard practice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our Kennedale service trucks carry common parts for Viking, Ghost Controls, and DoorKing operators, which keeps turnaround short when your gate is stuck open or closed. We also stock Elite control boards and limit switches. If your operator is discontinued or parts are back-ordered, we will tell you straight and give you options, including upgrade paths that reuse your existing gate hardware. No brand loyalty games. The right fix is the one that lasts.
Common Gate Motor & Opener Problems We See in Kennedale Homes
- Heavy-gauge pipe gates binding after steel posts set in caliche shift with clay expansion, misaligning the slide motor track. This is nearly absent in fully suburbanized Arlington but routine in Kennedale’s transitional zones. The fix is post reset to code depth with concrete, then track realignment.
- Oversized residential ornamental gates sagging due to worn hinges and springs on 1990s ranch homes, causing opener strain and premature failure. Many of these homes were built during Kennedale’s first growth wave and are now seeing simultaneous hinge, spring, and operator issues.
- Operator lubricants degrading in 100°F summers, leading to metal-on-metal binding on sliding gate tracks and motor burnout. We use high-temperature synthetic greases rated for Texas conditions, not standard lithium formulations.
- Original welded pipe or wrought-iron gates on 1970s-1990s properties reaching hardware failure age while owners attempt to automate them without addressing hinge wear or post stability. The motor cannot compensate for a gate that no longer moves freely by hand.
Pricing for Gate Motor & Opener in Kennedale, TX
We do not believe in mystery pricing. Here is what gate motor and opener work costs in Kennedale’s market:
| Service | Typical Range in Kennedale |
|---|---|
| Diagnostic & minor adjustment | $89-$150 |
| Motor repair (capacitor, limit switch, wiring) | $180-$340 |
| Gearbox or circuit board replacement | $350-$650 |
| New swing motor installation | $450-$950 |
| New slide motor installation | $550-$1,200 |
| Battery backup add-on | $180-$280 |
| Post reset to code depth with concrete (pair) | $400-$750 |
What moves the needle: gate weight and size, whether posts need resetting, electrical run distance from the house, and whether we are retrofitting an existing gate or starting fresh. Every estimate is free, written, and binding. The price we quote is the price on the bill. Call (833) 754-7503 for an exact quote on your specific gate.
Standing offers for Kennedale customers: $50 Off Any Repair Over $250; Free Second Opinion on Any Written Estimate; $89 Seasonal Tune-Up; and a permanent 5% Senior and Veteran discount.
We Also Serve Cities Near Kennedale
Our service area extends naturally from Kennedale to Kennedale and its neighboring communities. We regularly run to Everman for gate motor service on older ranch properties, Rendon for estate gate automation, Forest Hill for residential opener repair, and Arlington for both suburban and commercial gate work. The same technician, same tools, same 90-Day Done Right Promise apply across all five cities.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Kennedale
Kennedale sits on the Blackland Prairie’s expansive black clay soils, which swell dramatically after heavy rains and shrink and crack during summer droughts; this seasonal ground movement is the leading cause of gate post lean, sag, and misalignment here. Many older properties also have posts set in caliche rather than concrete, which accelerates the problem. Post reset to code depth with poured concrete is the lasting fix, not repeated surface adjustments. Call (833) 754-7503 and we will assess whether your posts need resetting before we quote any motor work.
Yes, we install slide motors on old welded pipe gates regularly in Kennedale’s southern and eastern acreage areas, provided the gate frame is sound and the posts are reset to proper depth with concrete. The heavy-gauge construction of these ranch gates often outlasts the original operators by decades. We match the motor capacity to the actual gate weight and usage pattern, not just what was there before. Most of these installations run $550-$1,100 and are completed in one day. Call for a free evaluation of your specific gate.
Yes, we recommend battery backup for every gate opener in Kennedale because power outages during severe weather are common in this part of Tarrant County, and a non-functional gate compromises both access and security. A battery backup adds $180-$280 and provides 24-48 hours of normal operation. For properties with livestock, it is particularly important. We include backup compatibility in every new installation quote and can retrofit most existing operators. Call (833) 754-7503 to discuss backup options for your current system.
We service and stock parts for nine brands on Kennedale ranch gates, with particular experience in heavy-duty applications from Viking, Ghost Controls, DoorKing, and Elite operators that handle the high cycle counts and gate weights common on acreage properties. Our trucks carry common control boards, limit switches, and gear assemblies for same-day repair. If your operator is obsolete, we will recommend a modern replacement that fits your existing gate without unnecessary modifications. Call with your brand and model for specific availability.
A modern linear motor will work with your H-brace gate if the gate is plumb, the hinges are in good condition, and the post is set to proper depth with concrete; we verify all three before recommending any operator. Many decades-old H-brace gates in Kennedale are structurally sound but have shifted posts or worn hinges that would strain a new motor. We address those fundamentals first, then install the linear motor matched to your gate’s geometry and weight. Typical linear motor installation on a refurbished H-brace gate runs $380-$950. Call (833) 754-7503 for a free assessment.
If your gate motor is making noise, moving slowly, or not moving at all, call (833) 754-7503 now. A live person will answer, 24 hours a day, 7 days a week. We will give you a straight answer about whether you need repair or replacement, a free written estimate with upfront pricing, and a technician who arrives prepared to finish the job in one trip. Done right - and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.