Fast, Reliable Gate Installation Across Kennedale
Gate installation in Kennedale typically runs $2,800-$7,500 for most residential projects, with acreage properties and heavy-duty automated systems at the higher end. Most Kennedale installations are completed in one day, and our Gate Installation team carries the welding rigs, concrete equipment, and automation inventory to handle both rural pipe gates and modern subdivision systems without a second trip.
We’ve been driving out to Kennedale since 1984. Back then it was mostly ranchettes and working land. Today you’ll find the same acreage properties alongside newer subdivisions near Mansfield Highway and Kennedale Parkway, and we still service both. That dual demand - heavy-gauge livestock gates one hour, automated ornamental driveway gates the next - is something you won’t find a few miles north in Arlington. We know the black clay soil, the caliche shortcuts, and the 100°F summers that punish undersized operators. When you call (833) 754-7503, a live person answers, 24 hours a day. We’ll give you an upfront price before we turn a single bolt.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Installation Company
Kennedale homeowners don’t want to think about their gate twice. They want it hung square, automated cleanly, and guaranteed in writing. That’s the only way we’ve worked for over 42 years.
Our technicians are background-checked, uniformed, and trained on nine automation brands - Viking, Ghost Controls, and DoorKing among them - so the correct parts travel with us on the first visit. No waiting on specialty orders. No callbacks because the opener was undersized for a 16-foot pipe gate in July heat.
We answer our own phones. Not a voicemail tree, not an answering service. A live person, day or night. And every job carries our 90-Day Done Right Promise - the Keystone Standard - written, no paperwork, no arguing. If it’s not right, we come back and make it right.
We also offer a permanent 5% Senior and Veteran discount, a $50 credit on any repair over $250, and free second opinions on any written estimate you’ve received elsewhere.
Our Gate Installation Services in Kennedale
Swing Gate Installation
Swing gates remain the most common choice for Kennedale’s ranch-style homes on half-acre to multi-acre lots. The 1970s-1990s properties near Kennedale Parkway and the older ranchettes off Mansfield Highway often have the clearance and grade for a clean inward or outward swing. We install single and double swing systems, always sizing the operator to the actual gate weight - not the sticker price. A heavy wrought-iron or welded-pipe gate in Kennedale’s heat needs a motor with overhead to spare. We source from Viking and Elite for these applications, with post footings set to 36-inch depth to withstand the black clay’s seasonal heave.
Sliding Gate Installation
Sliding gates solve the problem of sloped driveways and limited swing radius, and they’re increasingly popular in Kennedale’s newer subdivisions where lot geometry is tighter. But sliding systems are also the right call for many acreage properties with long service drives. The track must be perfectly level, the rollers rated for the actual load, and the motor protected from dust and heat. We install Ghost Controls and DoorKing sliding operators with sealed housings and thermal protection - critical when Kennedale’s summer temperatures turn metal tracks into binding hazards. We bury control conduit below the frost line and anchor posts in concrete footings that won’t creep with the clay.
Security Gate Installation
Newer Kennedale subdivisions and estate properties are adding security gates at driveway entrances for controlled access. We install keypad, remote, and smartphone-integrated systems with loop detectors, safety edges, and intercom capability. For residential developments near the city center, we coordinate with HOA requirements and local setback guidelines. Every security gate we install in Kennedale includes safety entrapment protection per national standards, and we program all access codes before we leave. The 90-Day Done Right Promise applies to security installations same as any other job.
Pedestrian Gate Installation
Walk-through gates complete a Kennedale property’s perimeter. We match materials and finish to existing driveway gates, whether that’s wrought iron, aluminum, or welded pipe. Hinges are the failure point on pedestrian gates - we use ball-bearing or greaseable barrel hinges rated for the gate weight, not the cheapest option that will sag in eighteen months. For properties with livestock, we install self-closing spring hinges and latches that hold against pressure from animals.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We carry inventory and factory training for nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Kennedale customers, this means we don’t diagnose your gate and then disappear for a week waiting on parts. Our trucks stock common operators, control boards, safety loops, and hardware for Viking, Ghost Controls, and DoorKing systems - the brands we install most often on heavy-duty and security applications in this market. If your acreage property needs a specialty operator for an oversized gate, we likely have it on the shelf. Same-day completion is standard, not exceptional.
Common Gate Installation Problems We See in Kennedale Homes
- Gate posts lean within months of installation. Kennedale’s black clay soil swells after spring rains and shrinks during summer drought. Posts set to shallow depth or in uncompacted caliche will tilt, sag, and bind the gate. We set posts to 36-inch concrete footings minimum, and we account for the soil’s expansion cycle.
- Original H-brace pipe gates were set in caliche, not concrete. On older ranchette properties, landowners often sank posts directly into the hardpan caliche layer. It holds for a while. Once the clay cycles, the caliche crumbles and the post leans under the gate’s weight. Resetting these to proper code footing depth is routine work for us, and it’s unique to this transitional rural-suburban market.
- Operators burn out early on heavy gates. Acreage properties with 16-foot welded-pipe gates or livestock facility entries need operators sized for the actual load, not a standard residential rating. Kennedale’s 100°F+ summers degrade lubricants and push undersized motors into thermal shutdown. We spec heavy-duty operators with duty-cycle ratings that match the application.
- Sliding gate tracks bind in heat and debris. The combination of dust from unpaved drives, summer heat, and occasional flash flooding in low spots along Kennedale’s southern edges can clog or warp sliding tracks. We install sealed track systems with proper drainage and specify operators with thermal overload protection.
Pricing for Gate Installation in Kennedale, TX
Here is what gate installation costs in the Kennedale market, based on jobs we’ve completed in 76060 and nearby:
| Gate Type | Typical Range in Kennedale |
|---|---|
| Single swing gate (manual, standard materials) | $2,800-$4,200 |
| Double swing gate (automated, ornamental aluminum) | $4,500-$6,800 |
| Sliding gate (automated, residential duty) | $5,200-$7,500 |
| Heavy-duty acreage gate (welded pipe, automated) | $6,500-$9,000+ |
| Security gate with access control | $5,800-$8,500 |
| Pedestrian gate (matched to existing) | $1,800-$3,200 |
| Post reset and re-pour (caliche conversion) | $800-$1,600 per post |
These ranges reflect actual Kennedale pricing. Acreage jobs run higher because of gate weight, longer drive runs for power and conduit, and the post work required in expansive clay. Subdivision installations on level lots with standard materials fall at the lower end. We settle on an exact, upfront price before we start - no surprises on the bill. Call (833) 754-7503 for a free estimate at your property.
We Also Serve Cities Near Kennedale
Our service area covers the full mid-cities corridor. We regularly complete Gate Installation in Kennedale and travel to Everman, Rendon, Forest Hill, and Arlington for gate installation, repair, and automation service. Same standards, same trucks, same 90-Day Done Right Promise at every address.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kennedale
The black clay soil beneath Kennedale expands when wet and contracts during drought, exerting tremendous pressure on anything buried shallow. Posts set in caliche or without proper concrete footings to 36-inch depth will tilt within one or two seasonal cycles. We reset leaning posts to code depth with reinforced concrete footings that account for this soil movement. Call (833) 754-7503 and we’ll assess your posts - estimates are free.
Yes, if the gate is oversized, welded pipe, or opened frequently. Standard residential operators are rated for lighter gates and intermittent use. Kennedale’s summer heat adds stress that pushes undersized motors into early failure. We size operators to the actual gate weight and duty cycle, and we stock heavy-duty Viking and Elite systems for exactly these applications. We can evaluate your gate and recommend the right operator - call for a free estimate.
We do this regularly on Kennedale’s southern and eastern acreage properties. The process involves removing the old H-brace, setting new posts to proper concrete footing depth, and installing an automated swing or sliding gate sized for the opening and use. We handle the welding, concrete, automation, and electrical in one trip. The 90-Day Done Right Promise covers the full installation. Call (833) 754-7503 to schedule a look at your gate.
We install DoorKing, Ghost Controls, and Elite most often for Kennedale subdivision security gates, depending on the access control features required. All three offer keypad, remote, and smartphone integration with safety entrapment protection. We stock these operators and can complete most installations without waiting on shipped parts. Call to discuss your subdivision’s requirements - we offer free second opinions on any written estimate you’ve received.
Most acreage installations are completed in one day. A standard automated swing or sliding gate on existing plumb posts takes 4-6 hours. If we need to reset caliche-set posts or pour new footings, add 2-3 hours for concrete cure before hanging the gate. We bring everything - welding rig, concrete mixer, operators, and hardware - so we’re not driving back to the shop. You’ll get an exact timeline with your upfront price. Call (833) 754-7503 to schedule.
Ready to get your gate done right? Call Ironworks Gate Co. at (833) 754-7503 for a free estimate at your Kennedale property. We’ll be there when we say, we’ll give you a square deal with upfront pricing, and we’ll stand behind it in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.