Fast, Reliable Gate Installation Across Everman
Gate installation in Everman, TX typically runs $2,800-$6,500 for a standard automated driveway gate, with most projects completed in one to two days and backed by our written 90-Day Done Right Promise. If you’re tired of wrestling with a sagging wooden gate on a 1970s ranch near Patton Avenue or replacing corroded chain-link hardware for the third time, we can help. Call (833) 754-7503 - a live person answers, 24 hours a day, 7 days a week.
We’ve been serving Everman and the surrounding Fort Worth area since 1984. Our technicians know the difference between a gate that looks straight on Monday and one that stays straight through a wet North Texas spring. That difference usually comes down to how the posts are set, and in Everman, that means understanding black clay.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Installation Company
Homeowners in Everman don’t call us because we’re the cheapest. They call us because their last installer didn’t account for the soil, and two seasons later the gate won’t latch. We’ve built our reputation in Tarrant County on showing up when we say we will, pricing the job upfront, and fixing it for good if something shifts.
Our reviews from Everman customers consistently mention the same things: we answer the phone, we explain what’s actually wrong, and we don’t leave until the gate opens and closes the way it should. Response time to Everman is typically same-day or next-day, and our trucks carry parts for nine major automation brands so we’re not ordering components while your driveway sits open.
What separates us from generalist handymen is the combination of welding craft and certified automation expertise. We’re trained and equipped on Viking, Ghost Controls, DoorKing, Elite, and five other brands. Most jobs finish in a single visit. And every job, from a simple pedestrian gate on a 76140 bungalow to a full estate installation near Rendon Road, carries the same written guarantee: the 90-Day Done Right Promise, known inside the company as the Keystone Standard. If it’s not right, we come back and make it right. No paperwork, no arguing.
Our Gate Installation Services in Everman
Swing Gate Installation
Swing gates remain the most common type in Everman, and for good reason. They fit the modest setbacks and level driveways typical of the city’s 1960s-1990s housing stock. But a swing gate in Everman fails fast if the posts aren’t set below the active clay layer. On a 1970s ranch home on Everman’s Patton Avenue, we replaced a rotting one-piece swing gate whose wood frame had warped after 25 North Texas summers. We set the new dual-panel aluminum gate’s fiberglass-reinforced posts on 48-inch-deep footings, poured below the active clay layer, and paired it with a LiftMaster LA500 slide operator that handles seasonal soil shift. A typical swing gate installation in Everman runs $2,800-$4,200 for manual, $4,500-$6,200 automated.
Double Gate Installation
Double gates solve the width problem for Everman homeowners with two-car driveways who don’t want the sweep radius of a single long leaf. The challenge here is synchronization: both leaves must meet dead level at the center, which becomes impossible if one post heaves even an inch. We solve this with paired adjustable hinges and, critically, footings that don’t move. Double gate installation in Everman typically costs $3,200-$5,800 depending on automation and materials.
Security Gate Installation
Everman’s working-class neighborhoods don’t always show up in glossy home magazines, but homeowners here care about security as much as anyone in Southlake. A security gate in Everman needs to do two things: deter and survive. That means steel or aluminum construction, tamper-resistant hardware, and an operator rated for high-cycle use. We install access control - keypads, remotes, telephone entry - and we wire it to withstand the voltage fluctuations that follow North Texas ice storms. Security gate installation in Everman ranges from $4,200-$7,500.
Sliding Gate Installation
Sliding gates make sense for Everman properties with short driveways or upward slopes where a swing leaf would scrape. The track must be perfectly level, which means either a poured concrete beam or a ground-mounted track with proper drainage. In Everman’s clay soils, we favor cantilever designs where the gate hangs from posts without a ground track - fewer points for soil movement to disrupt. Sliding gate installation in Everman runs $3,800-$6,500.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
Our trucks stock parts and carry certification for nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Everman homeowners, this means we don’t diagnose by guesswork. We match the correct operator to your gate weight, cycle count, and soil conditions. We keep common Viking and DoorKing components on hand for faster turnaround, and we can source Elite and Ghost Controls parts within 24 hours if your installation calls for something specific. The right fix on the first visit - that’s the point of carrying nine brands, not one.
Common Gate Installation Problems We See in Everman Homes
- Shallow concrete collars around cedar posts rock in black clay, causing gates to sag and fail to latch after wet-dry cycles. On Everman’s older residential streets, original cedar privacy gate posts were commonly set with shallow concrete collars that don’t reach through the active clay layer. They rock, heave, and twist after just a few wet-dry cycles. Experienced local technicians solve this by pulling and resetting posts with deeper footings, not just adjusting hinges.
- Wooden swing gates from the 1970s-80s warp and split from 100°F summers and freeze-thaw events, exceeding service life. North Texas summers routinely exceed 100°F, warping wooden gate frames and accelerating rust on metal hardware. Periodic severe ice storms, most notably the February 2021 Winter Storm Uri, can snap wooden gates outright. The back-and-forth between extreme heat and occasional hard freezes compresses the functional lifespan of every gate component.
- Original chain-link swing gate hardware on 1960s-90s homes is corroded or unavailable; retrofitting with modern hinges requires post reinforcement. Many Everman homes still run their original chain-link gates with hardware that hasn’t been manufactured in decades. We retrofit with modern adjustable hinges, but the posts often need reinforcement or replacement first.
- Automated gate motors seize after ice storms or burn out from voltage spikes. The February 2021 storm didn’t just break branches; it seized motors and fried control boards across Tarrant County. We install operators with cold-weather ratings and surge protection suited to Everman’s conditions.
Pricing for Gate Installation in Everman, TX
Here is what gate installation costs in Everman’s market, based on jobs we’ve completed in 76140 and nearby:
| Service | Typical Range in Everman |
|---|---|
| Manual swing gate (single, aluminum/steel) | $2,800-$4,200 |
| Automated swing gate (single) | $4,500-$6,200 |
| Double swing gate (manual) | $3,200-$4,800 |
| Double swing gate (automated) | $5,200-$7,200 |
| Sliding gate (cantilever, automated) | $3,800-$6,500 |
| Security gate with access control | $4,200-$7,500 |
| Pedestrian gate (walk-through) | $1,800-$3,200 |
| Post reset with deep footing (per post) | $450-$750 |
What moves the price: material choice (aluminum vs. steel vs. wood), automation level, access control features, and how much post work the soil demands. In Everman, the soil work often surprises homeowners who expected a simple swap. We price everything upfront before turning a bolt - no surprises on the bill. Estimates are free. Call (833) 754-7503 to schedule.
Active offers: $50 off any repair over $250, free second opinion on any written estimate, $89 seasonal tune-up, and a standing 5% senior and veteran discount.
We Also Serve Cities Near Everman
Our Gate Installation in Everman team regularly works in Rendon, Kennedale, Forest Hill, and Burleson. The same soil challenges apply across southern Tarrant County, and we bring the same post-setting discipline to every job. If you’re outside Everman city limits but nearby, we can likely still help - call and we’ll confirm coverage.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Everman
Your gate posts are moving because Everman sits on North Texas’s Blackland Prairie, where expansive black clay soils heave dramatically during wet winters and spring rains, then shrink hard in summer drought. Shallow concrete collars, common on older Everman homes, get pushed and twisted by this seasonal cycle. We fix this by resetting posts on 48-inch-deep footings poured below the active clay layer. Call (833) 754-7503 for a free assessment - estimates are free.
Most 1980s cedar gates in Everman have exceeded their service life; the wood has warped, the frame has twisted, and replacement lumber won’t match the original dimensions. If the gate still hangs reasonably square and the wood is solid, we can replace hardware and extend its life a few years. But if the frame is racked or rotted, a new aluminum or steel gate costs less over time than repeated service calls. A typical new swing gate in Everman runs $2,800-$4,200. Call (833) 754-7503 and we’ll give you an honest repair-vs-replace opinion - free.
Yes, if the gate structure and posts are stable. The operator doesn’t care about soil; it cares about alignment. In Everman, we pair automation with deep-set posts and adjustable hinges that absorb minor seasonal movement. We favor operators like the LiftMaster LA500 with built-in obstruction sensing and soft-start/soft-stop programming that reduces stress on posts. Installation with automation in Everman typically runs $4,500-$6,200. Call (833) 754-7503 for exact pricing - estimates are free.
Original hardware from 1960s-90s chain-link gates is largely obsolete, but the gate itself can usually be retrofitted with modern adjustable hinges, latches, and rollers. We carry universal-fit components that bolt to existing posts, and we can reinforce or replace posts that have corroded at the concrete line. Parts availability is rarely the limiting factor; post condition is. Call (833) 754-7503 and we’ll inspect what you have - estimates are free.
The February 2021 ice storm seized motors, snapped wooden gates, and bent metal components across Everman and Tarrant County. The combination of ice loading and power fluctuations damaged control boards and burned out operators. Since Uri, we install cold-weather-rated operators with surge protection and recommend aluminum or steel gates over wood for properties exposed to wind and ice. If your gate hasn’t been inspected since 2021, it’s worth checking. Call (833) 754-7503 - our $89 seasonal tune-up covers winterization assessment.
Ready to stop fighting your gate? Call Ironworks Gate Co. at (833) 754-7503 for a free estimate on Gate Installation in Everman. A live person will answer, 24 hours a day, 7 days a week. We’ll schedule a visit, price the job upfront, and back it with our written 90-Day Done Right Promise. We’ve been doing this since 1984. We plan to be here for another forty years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman since 1984.