Fast, Reliable Gate Installation Across Cleburne
Gate installation in Cleburne typically runs $2,800-$7,500 for most residential and small-acreage properties, with most jobs completed in a single visit and pricing settled upfront before we dig the first post hole. We answer calls live, 24 hours a day, and our crew is on the road to Cleburne from our Johnson County route within the hour.
We’ve been installing gates across Cleburne since 1984, from the historic homes near Buffalo Street and the courthouse square to the ranch properties stretching south along FM 2280 and west toward FM 917. Our Gate Installation team knows the difference between a suburban ornamental gate and a working ranch gate that sees fifty open-close cycles a day. That matters in Cleburne, where the housing stock splits between early-1900s homes on town lots and 5-to-20-acre rural parcels with long caliche drives that need real hardware, not decorative afterthoughts.
Call (833) 754-7503 for a free estimate. We’ll be there when we say.
Why Ironworks Gate Co. Is Cleburne’s Preferred Gate Installation Company
Forty-two years in this trade means we’ve installed gates in Cleburne through droughts, floods, hard freezes, and the soil heave that comes with all three. Our customers here remember the last contractor who didn’t show, or who showed up with a gate that looked right but dragged the ground by the second wet season. We don’t work that way.
Our 90-Day Done Right Promise, the Keystone Standard, applies to every Cleburne job in writing. No paperwork to file, no argument. If it’s not right, we come back and make it right.
A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree, not an answering service in another state. When you call (833) 754-7503, you talk to someone who can dispatch a crew.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry common parts and openers on our trucks, so most Cleburne installations finish in one trip. That’s the point. You shouldn’t have to take two days off work for a gate.
Our Gate Installation Services in Cleburne
Double Gate Installation
Double gates are the right choice for Cleburne acreage properties with wide driveway entrances, typically 14 to 20 feet across. We recently installed a heavy-duty Double Swing Gate at a ranch property off FM 2280, where the prior setup had pulled out of the clay after two wet seasons. Our crew dug 48-inch footings, set the posts in concrete, and used a LiftMaster pneumatic opener rated for 800-lb doors, ensuring the gate stays aligned through Johnson County’s freeze-thaw cycles. The double gate folds back cleanly, leaving the full drive width open for equipment, trailers, and livestock haulers.
Swing Gate Installation
Swing gates work well on Cleburne properties with level approaches and room for the arc, which is most of the ranch-style homes along the 76031 and 76033 corridors. But Cleburne’s Blackland clay is unforgiving. Gate posts set directly in that soil without proper concrete footings walk out of plumb within two or three wet seasons. We see this constantly on properties south and west of town, where agricultural pipe-frame swing gates drag the caliche drive because the posts have shifted inches. Our swing gate installations use deeper footings, heavier posts, and hinge hardware rated for the actual gate weight, not the catalog minimum.
Security Gate Installation
Security gates for Cleburne properties range from ornamental iron with keypad access for homes near the historic downtown to heavy tubular steel with remote entry and loop detectors for acreage off FM 917. We integrate access control that matches how you actually live: keypads for family, remotes for frequent visitors, telephone entry systems for deliveries. Every security gate we install in Cleburne is spec’d for the local wind load and the repeated soil movement that tries to torque the frame out of square.
Sliding Gate Installation
Sliding gates make sense when the driveway slopes toward the road, or when there’s not enough clearance for a swing arc. On Cleburne’s longer acreage drives, a sliding gate keeps the full width available and doesn’t require the level pad a swing gate needs. We use cantilever or tracked systems depending on the gate weight and the drive surface, and we always account for the clay heave that can throw a track out of alignment if the footings aren’t deep enough and properly isolated.
Driveway Gate Installation
Driveway gates in Cleburne span the full range, from ornamental iron on town lots to working agricultural gates on rural parcels. The common thread is that they need to stay square and operate reliably through North Texas weather cycles. We spec the post size, footing depth, and opener capacity to the actual gate weight and wind exposure, not to a generic chart.
Pedestrian Gate Installation
Pedestrian gates for Cleburne homes, whether walk-through access in a fence line or a separate entry near the main driveway, get the same attention to hinge detail and post stability. A pedestrian gate that binds or sags is usually a post problem, and in Cleburne, that means addressing the clay before setting the first bolt.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cleburne
We are trained and equipped on nine major gate-automation brands, and we stock parts and openers for Cleburne customers from our Johnson County inventory. For the heavy agricultural and security gates common in this market, we frequently install and service Linear, Viking, and Ghost Controls operators, along with DoorKing access systems for multi-user properties. Having the right opener on the truck means we don’t order-and-wait. Most Cleburne installations finish the same day we start.
Common Gate Installation Problems We See in Cleburne Homes
- Gate posts walk out of ground on rural properties. On acreage south and west of Cleburne, pipe-frame gates set directly in Blackland clay without concrete footings gradually tilt and heave upward through wet-dry cycles. The gate starts dragging the caliche drive. We prevent this with 48-inch minimum footings in concrete, sized to the gate weight and wind load.
- Undersized openers fail under heavy agricultural gates. A pipe-frame ranch gate can weigh 600 to 1,000 pounds, far beyond what a light residential opener can move, especially during a hard freeze when gearbox grease thickens. We match the opener to the actual gate weight and duty cycle, with capacity in reserve.
- Misaligned hinges bind after seasonal soil movement. Cleburne’s clay soils shift inches vertically each year, torquing post-mounted hinges out of plumb. Binding hinges stress the automatic operator and wear pivot points prematurely. Proper post depth and adjustable hinge hardware prevent this.
- Freeze damage to unprotected components. The February 2021 ice event cracked wooden gate rails and seized operator gearboxes across Johnson County. We spec freeze-rated components and advise on winter maintenance for Cleburne’s periodic hard freezes.
Pricing for Gate Installation in Cleburne, TX
Most gate installations in Cleburne fall into these ranges, based on actual jobs we’ve completed in the 76031 and 76033 ZIP codes:
- Pedestrian gate (ornamental iron, manual): $1,800-$2,800
- Single swing driveway gate (automated, residential): $2,800-$4,500
- Double swing driveway gate (automated, residential to light acreage): $4,200-$6,800
- Heavy-duty agricultural double gate (automated, pipe or tubular steel): $5,500-$8,500
- Sliding gate (automated, residential to acreage): $4,800-$7,500
- Security gate with integrated access control (keypad, remote, loop): $6,200-$10,000+
What moves the price: gate material and weight, automation brand and capacity, footing depth required for soil conditions, access control features, and whether we’re replacing an existing gate or starting from bare ground. We settle the full price before we start. No surprises on the bill.
Call (833) 754-7503 for an exact quote. Estimates are free.
Standing offers for Cleburne customers: $50 off any repair over $250, free second opinion on any written estimate, $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Cleburne
Our crews route daily through Johnson County and the surrounding area. If you’re in Keene, Joshua, Burleson, or Crowley, the same live-answer phone line and same-day scheduling apply. We handle Gate Installation in Cleburne and these neighboring communities with identical standards: upfront pricing, one-trip completion when possible, and the 90-Day Done Right Promise on every job.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Cleburne
Cleburne sits on the Blackland Prairie, where expansive clay soils shrink in drought and heave after rain, moving gate posts inches out of plumb within a few seasons. We prevent this by digging footings to 48 inches minimum, setting posts in concrete with proper drainage, and sizing the post diameter to the gate weight and wind exposure, not to a generic spec. Call (833) 754-7503 to schedule an evaluation of your existing posts.
Yes, we install sliding gates on Cleburne acreage properties where the driveway is too long or sloped for a swing gate, or where the entrance is close to the road. We use cantilever systems for uneven surfaces and tracked systems for heavy gates on level ground, with footings designed to resist the clay heave common along FM 2280 and FM 917. Call (833) 754-7503 for a free estimate on your drive layout.
We typically spec pneumatic or high-torque electromechanical openers rated for 800 pounds or more, from brands like LiftMaster, Linear, or Viking, depending on the gate weight and daily cycle count. The key is matching the opener to the actual gate weight with capacity in reserve, because undersized openers fail prematurely, especially during hard freezes. Call (833) 754-7503 and we’ll size the right unit for your gate.
We schedule around your rotation or handling needs, and we design gates with latches and gaps that contain your stock without catching hooves or horns. For working ranches, we prioritize quick-close mechanisms and backup manual release in case of power failure. Call (833) 754-7503 to discuss your operation’s specific requirements.
Ornamental iron or aluminum swing gates with traditional scrollwork and finials complement the early-1900s homes near Buffalo Street and the courthouse square without overwhelming the original architecture. We can match existing fence lines and integrate modern automation in a compact operator housing that doesn’t dominate the pedestrian-scale entry. Call (833) 754-7503 to review styles and get an exact quote.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Cleburne since 1984.