Fast, Reliable Gate Repair Across Cleburne
Gate repair in Cleburne typically costs between $180 and $650 depending on whether you need hinge adjustment, post resetting, or full welding work, and most jobs are completed in a single visit with upfront pricing agreed before we start. We’re Gate Repair specialists who understand the particular stress that Cleburne’s Blackland Prairie clay puts on driveway gates, from the historic homes near downtown to the ranch properties along FM 2280 and FM 917. Our technicians are on the road throughout Johnson County every day, and we answer the phone live at (833) 754-7503, 24 hours a day, 7 days a week. No voicemail. No waiting until Monday.
Why Ironworks Gate Co. Is Cleburne’s Preferred Gate Repair Company
We’ve been doing this work since 1984. That’s over 42 years of learning how gates fail in North Texas soil, and how to fix them so they stay fixed. Cleburne homeowners call us because we show up when we say we will, we price the job before we touch a bolt, and we put our guarantee in writing.
Our customers in the 76031 and 76033 zip codes know the 90-Day Done Right Promise by heart. It’s our Keystone Standard: if something isn’t right, we come back and make it right. No paperwork to dig up. No argument. That promise has covered every job we’ve done since Victor Salinas founded Ironworks Gate Co.
Our technicians are background-checked, uniformed, and trained on nine automation brands, including Linear, Viking, and Ghost Controls. We carry the parts that fail most often on Cleburne gates, which means most repairs finish in one visit. The square deal matters here: upfront price, no surprises on the bill.
When you call (833) 754-7503, a live person answers. Not a voicemail tree. Not an answering service in another state. Someone who can dispatch a technician to your property in Cleburne, whether you’re off West Henderson Street or out past Lake Pat Cleburne.
Our Gate Repair Services in Cleburne
Post Repair
Gate posts lean in Cleburne more than almost anywhere else we work. The black clay soil beneath this city shrinks dramatically during summer drought, then swells and heaves after rain. That cycle torques posts out of plumb year after year. On properties south and west of town along FM 2280 and FM 917, we regularly find agricultural pipe-frame swing gates set directly in clay with no concrete footing. The posts walk out of the ground over a few wet seasons, and the gate drags the caliche drive. We excavate, set proper footings below the active soil layer, and replumb the post so the gate hangs true again. Post repair in Cleburne typically runs $280-$520.
Gate Realignment
A gate that drags, binds, or won’t latch is usually a alignment problem caused by shifting posts or settling hardware. We recently repaired a sliding gate on a townhome off West Wardville Road where the clay-heavy soil had pushed the track out of alignment, binding the gate against the stop. We replaced the crushed rollers, reset the track, and installed a rolling-code LiftMaster remote to improve security in the tight alley access. Realignment work in Cleburne homes generally costs $180-$340 and is often same-day.
Weld Repair
North Texas freeze-thaw cycles stress weld joints on iron and steel gates, particularly on older ornamental work near the historic downtown core and on agricultural pipe gates without proper footing. When a weld cracks, the gate sags, twists, or separates entirely. Our technicians weld with the same care they’d use in their own mother’s driveway. We grind, prep, and weld to structural standard, then prime and paint to match. Weld repair on Cleburne gates typically ranges from $220-$480 depending on access and material thickness.
Hinge Repair
Hinges take the full load of a gate every time it opens or closes. In Cleburne, soil movement transfers that stress directly to the hinge plates, elongating bolt holes and wallowing out pin bores. We replace with heavy-duty ball-bearing or greaseable hinges rated for the gate’s actual weight, not what the original builder guessed. Hinge repair in Cleburne usually runs $160-$290.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cleburne
We are trained and equipped to service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Cleburne homeowners, this means we diagnose the actual problem rather than guessing. We stock common failure parts for Linear, Viking, and Ghost Controls operators locally, so when your opener fails on a Friday evening, we don’t leave you waiting for a warehouse shipment. The correct fix on the first visit. That’s how we’ve worked for over 42 years.
Common Gate Repair Problems We See in Cleburne Homes
- Leaning posts from Blackland clay movement. The expansive soil around Cleburne shrinks and swells inches vertically each year. Posts set without proper depth or concrete footings gradually tilt, and the gate drags or jams against the ground or frame.
- Automatic openers binding due to post shift. When a post moves even half an inch, the opener arm or slide track goes out of alignment. The motor strains, gears strip, or the safety reverse triggers falsely. We fix the post first, then recalibrate the operator.
- Weld cracks on agricultural pipe gates. Common on acreage properties without concrete footings. The repeated flexing from soil movement cracks welds at the hinge and latch points. These need structural welding, not a quick tack.
- Freeze damage to operators and sensors. The February 2021 ice event seized gearboxes and shattered plastic sensor housings across Johnson County. We replace with cold-rated components and verify the heater circuit on sensitive operators.
Pricing for Gate Repair in Cleburne, TX
We believe in upfront pricing settled before a single bolt is turned. Here’s what gate repair costs in the Cleburne market:
| Service | Typical Range in Cleburne |
|---|---|
| Hinge repair / replacement | $160 - $290 |
| Gate realignment | $180 - $340 |
| Weld repair | $220 - $480 |
| Post repair / resetting | $280 - $520 |
| Lock repair | $140 - $260 |
| Rust treatment & coating | $180 - $350 |
Factors that move the price: depth of the post footing needed, accessibility for welding equipment, whether the opener requires recalibration after realignment, and the gauge of the steel being repaired. We offer $50 off any repair over $250, a permanent 5% Senior and Veteran discount, and free estimates with no obligation. Call (833) 754-7503 for an exact quote on your gate.
We Also Serve Cities Near Cleburne
Our service area covers the full Johnson County region. We regularly repair gates in Keene, Joshua, Burleson, and Crowley, with the same 90-Day Done Right Promise and live-answer phone support. Whether you’re on a ranch outside Joshua or in a townhome near Burleson’s Old Town, we bring the same tooling and the same standard.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Cleburne
The black clay soil of the Blackland Prairie shrinks in drought and swells after rain, moving posts out of plumb season after season. This is the dominant cause of leaning gate posts in the 76031 and 76033 zip codes, and it’s why we always assess footing depth before simply straightening a post. Call (833) 754-7503 and we’ll check yours.
Most realignment jobs in Cleburne are completed in two to four hours, including excavation, resetting the post in concrete, and rehanging the gate. If the opener needs recalibration, add about 30 minutes. We settle the price before we start, and most visits are same-day. Call (833) 754-7503 to schedule.
Yes. On acreage along FM 2280 and FM 917, we regularly repair pipe-frame swing gates set directly in clay soil. We typically recommend adding a proper concrete footing to prevent the post from walking again, but we can also weld and realign the existing setup if that’s what you need. Estimates are free - call (833) 754-7503.
We are certified and equipped for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Cleburne customers, we stock common Linear, Viking, and Ghost Controls parts locally for faster turnaround. Whatever is on your driveway, we have the manual and the tooling. Call (833) 754-7503 to book a technician.
Yes. Hard freezes, including severe ice events like February 2021, crack wooden rails, seize operator gearboxes, and shatter plastic sensor housings in Cleburne. We replace damaged components with cold-rated parts, verify the heater circuit where applicable, and realign anything that shifted. Call (833) 754-7503 for a free assessment.
Ready to get your gate working right? Call Ironworks Gate Co. at (833) 754-7503 for a free estimate. A live person will answer, 24 hours a day, 7 days a week. We’ll be there when we say. And we’ll stand behind it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Cleburne and Johnson County since 1984.