Fast, Reliable Gate Installation Across Burbank
Gate installation in Burbank typically runs $2,800-$7,500 for most residential jobs, with swing gates on level lots at the lower end and custom automated sliding systems on hillside properties climbing higher. Most Burbank installations are completed in one to two days, with automation programming and final inspection wrapped up before we leave your driveway.
We’ve been installing and servicing gates in Burbank since 1984, and we know the difference between a gate that looks good on day one and one that still operates quietly after fifteen years of Santa Ana winds and hard water. Our shop is a short drive from the Burbank studios, and we keep our trucks stocked with the hardware, operators, and welding equipment needed for the specific gate styles found in this city. Whether you’re replacing a rusted-out 1980s tubular gate in the Rancho neighborhood or installing a new automated entry system on a hillside property near Verdugo Mountain, we arrive prepared. Call (833) 754-7503 for a free, upfront estimate.
Why Ironworks Gate Co. Is Burbank’s Preferred Gate Installation Company
Burbank homeowners have called us back for decades because we treat the 400th job with the same care as the first. Our technicians live in the Valley, shop at the same hardware stores on San Fernando Boulevard, and understand that a gate failure on a Friday evening before a studio shoot is not a minor inconvenience.
Our reviews from Burbank customers consistently mention two things: we show up when we say we will, and we explain the repair or installation in plain language before any work begins. No jargon, no pressure.
Response time to Burbank is typically under 45 minutes during business hours and under 90 minutes for after-hours emergency calls. We route our trucks from our Los Angeles base up the 5 or through Glendale depending on traffic patterns, and we know which surface streets to take when the 134 is backed up past the Western Avenue exit.
We also understand Burbank’s local conditions in ways that matter for gate longevity. We know which neighborhoods have the steeper grades that stress sliding gate operators. We know which ZIP codes have the highest concentration of automated gates cycling 50, 100, or more times daily. And we know how Burbank Water and Power’s mineral-heavy water accelerates corrosion on steel hardware. That local knowledge translates to gates that last longer and cost less to maintain.
Our Gate Installation Services in Burbank
Swing Gate Installation
Swing gates remain the most common style in Burbank’s flatland neighborhoods, particularly in the post-WWII ranch home areas between Olive Avenue and Victory Boulevard. A single swing gate in Burbank typically costs $2,800-$4,200 installed, while a double swing system runs $3,800-$6,500 depending on automation and materials. We install swing gates with proper post depth and concrete footings rated for the wind loads this valley sees, and we always verify that your driveway grade won’t cause the gate to drag before we quote. On sloping properties near the Verdugo foothills, we often recommend a Gate Installation alternative or a specialized uphill swing operator rather than forcing a standard setup that will fail prematurely.
Sliding Gate Installation
Sliding gates are the practical choice for Burbank’s narrower driveways and steeper lots, particularly in the hillside areas above Glenoaks Boulevard and along the south-facing Verdugo slopes. A residential sliding gate installation in Burbank runs $4,200-$7,500, with the higher end covering heavy-duty steel frames, underground operators, and integrated access control. The critical factor on these jobs is the track geometry. Steeper grades cause rolling friction to increase exponentially, which overheats operators and wears v-wheels prematurely. We calculate the exact grade, specify the correct operator horsepower, and install ground tracks with proper drainage so winter rains don’t pool and accelerate corrosion. We’ve replaced too many competitor installations where a standard operator was shoehorned onto a grade it couldn’t handle.
Double Gate Installation
Double gates, whether swing or sliding, are popular in Burbank’s wider ranch-style driveways and in the estate properties near the studio corridors. A double swing installation typically ranges $4,500-$6,800, while a bi-parting sliding system can run $5,500-$8,200 depending on width and automation complexity. These systems require precise synchronization. On automated double gates, both leaves must meet perfectly at the center, and the operators must communicate so one doesn’t lag behind the other. We install and program these systems with laser-aligned posts and calibrated limit switches, then test them under load before we leave. For high-traffic properties in 91505 and 91506, we often specify commercial-grade operators even on residential jobs because the cycle count demands it.
Driveway Gate Installation
Your driveway gate is the first thing visitors see and the last line of security for your property. In Burbank, driveway gates must handle everything from daily family traffic to production crew vehicles to delivery trucks. We install steel, aluminum, and wrought-iron driveway gates with frames engineered for your specific opening width and local wind exposure. Every driveway gate installation includes a structural assessment of your existing posts or columns, reinforcement recommendations if needed, and automation integration if desired. We do not install gates on inadequate posts. We’ve seen too many beautiful gates torn off their hinges by Santa Ana gusts because someone skipped this step.
Pedestrian Gate Installation
Pedestrian gates in Burbank often serve side yards, pool enclosures, and secondary access points. These smaller gates, typically $1,800-$3,200 installed, require the same attention to hinge specification and frame squareness as their larger counterparts. We frequently install pedestrian gates with standalone keypad or card reader access for properties where the main driveway gate is automated but foot traffic needs controlled entry. On older Burbank homes with original stucco walls and narrow side yards, we take care to match existing finishes and minimize disruption to mature landscaping.
Security Gate Installation
Security gates in Burbank serve a dual purpose: they manage access and they provide privacy in a city where studio tourism and location scouting create unusual foot traffic. We install security gates with integrated access control, video intercoms, and loop detectors for automatic exit. For properties in the studio corridor neighborhoods, we often design systems with multiple user codes, time-based access restrictions, and audit logging so homeowners know exactly who entered and when. These systems integrate with LiftMaster, DoorKing, and Elite automation platforms, and we program them on-site before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We are trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Burbank customers, this means we stock common operator models, replacement circuit boards, and gear assemblies locally, not ordered from a warehouse three states away. When your Ghost Controls operator fails on a Sunday evening before a Monday production call, we can often replace it same-day from truck stock. When your Elite access controller needs reprogramming, we do it on-site with factory-certified tools. We do not guess. We do not rig temporary fixes. We install the correct component, program it correctly, and test every function before we leave your property.
Common Gate Installation Problems We See in Burbank Homes
- Santa Ana wind damage to wrought-iron panels and hinges. Burbank’s position in the San Fernando Valley makes it one of the most wind-exposed residential areas in greater Los Angeles. Gusts funneling through the Cajon and Newhall passes regularly hit 50-70 mph, warping gate panels and stripping hinges off inadequately anchored posts. We see a reliable surge of emergency calls from October through January, and we plan our installation schedules to include reinforced post footings and wind-rated hardware on every Burbank job.
- Accelerated corrosion from Burbank Water and Power’s mineral-heavy supply. Burbank’s water carries notably high mineral content, and when combined with sprinkler systems that wet gate posts daily, exposed steel hardware and below-grade hinge anchors corrode far faster than they would near the coast. We specify hot-dip galvanized or stainless hardware for Burbank installations, and we always seal post bases to minimize water intrusion.
- Operator failure from excessive cycling on high-traffic properties. Burbank’s 91505 and 91506 neighborhoods near the studio corridors have an unusually high concentration of automated security gates installed by industry professionals. These gates cycle 50, 100, or more times daily, far exceeding residential operator ratings and burning out motors and controllers in three to five years instead of fifteen. We assess actual or anticipated cycle counts and specify commercial-grade operators where needed, not standard residential units that will fail prematurely.
- Sliding gate track binding on steep Verdugo foothill grades. The steeper lots on south-facing hillsides above Glenoaks Boulevard and along the Verdugo Mountain edge create sharp driveway grades that cause sliding gate tracks to bind and operators to overheat. We calculate exact grades, specify high-torque operators with soft-start programming, and install tracks with precise leveling and drainage to prevent these failures.
Pricing for Gate Installation in Burbank, CA
Honest pricing starts with honest ranges. Here is what gate installation costs in Burbank’s current market:
| Gate Type | Typical Range in Burbank |
|---|---|
| Single swing gate, manual | $2,800-$3,800 |
| Single swing gate, automated | $3,800-$5,200 |
| Double swing gate, automated | $4,500-$6,800 |
| Sliding gate, automated | $4,200-$7,500 |
| Bi-parting sliding gate, automated | $5,500-$8,200 |
| Pedestrian gate | $1,800-$3,200 |
| Security gate with access control | $5,500-$9,500 |
| Custom wrought-iron fabrication | $6,500-$12,000+ |
What moves a job within these ranges? Material choice: steel costs less than aluminum, which costs less than custom wrought iron. Automation level: basic remote control versus smartphone integration, video intercom, and multiple access codes. Site conditions: existing post removal, electrical run distance, driveway grade correction, and stucco or masonry repair. We provide a written, itemized estimate before any work begins. No surprises on the bill. Call (833) 754-7503 for your free estimate.
We Also Serve Cities Near Burbank
Our Gate Installation in Burbank team also responds to calls in Universal City, North Hollywood, Glendale, and Valley Village. We know the distinct gate styles and local conditions in each community, from the hillside estates of Glendale to the canyon-adjacent properties of Studio City. The same 90-Day Done Right Promise and upfront pricing apply wherever we work.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Burbank
Replace it. A 30-year-old operator has exceeded its design life by a decade or more, and replacement parts are often obsolete. We replaced a swing gate operator in a 1950s ranch home on W. Clark Avenue near Bob Hope Airport, where the original FAAC motor had burned out from excessive daily cycling by a TV producer’s family and staff. We installed a heavy-duty LiftMaster RSL12V that handles the high traffic and integrated a new keypad to replace the outdated single-button remote. New operators include modern safety features, smartphone connectivity, and warranties that a repaired 1990s unit cannot match. Call (833) 754-7503 and we’ll assess your specific system.
Burbank Water and Power delivers water with notably high mineral content, and gate repair techs working the older ranch-home neighborhoods frequently find that exposed steel post hardware and below-grade hinge anchors have corroded far faster than expected. Sprinkler systems that wet gate posts daily compound the problem, turning mineral deposits into an accelerant for rust. Near the coast, salt air causes surface corrosion but frequent marine layer moisture actually rinses deposits away. In Burbank’s drier, harder water, corrosion penetrates deeper and faster. We specify galvanized or stainless hardware and sealed post bases on all Burbank installations. Call (833) 754-7503 for a hardware inspection.
Yes, if your property is exposed to prevailing winds. Burbank sits deep in the San Fernando Valley and is one of the most wind-exposed residential areas in greater LA during Santa Ana events, which funnel through the Cajon and Newhall passes and regularly hit 50-70 mph gusts on the valley floor. Hillside properties in the Verdugo foothills catch even stronger, more turbulent flow. A wind-rated gate has heavier gauge framing, reinforced pickets, and posts set in deeper concrete footings with larger diameter. We assess your specific exposure during our site visit and specify accordingly. The additional cost is typically $400-$800 versus a standard installation. Call (833) 754-7503 for a wind-load assessment.
No. Standard residential operators are rated for 10-20 cycles daily. At 100+ cycles, you need a commercial-duty or industrial-duty operator with continuous-duty motors and heavy-duty gearboxes. Burbank’s 91505 and 91506 neighborhoods near the studio corridors have an unusually high concentration of automated security gates installed by industry professionals, leading to far higher cycle counts and accelerated motor wear compared to typical suburban gates. We specify operators like the LiftMaster CSW200 or FAAC 844 with high-cycle duty ratings, and we install them with proper thermal management and service-interval scheduling. The upfront cost is higher, but the five-year total cost of ownership is lower than replacing three residential operators. Call (833) 754-7503 for a high-cycle system quote.
On a sloping driveway, a sliding gate is usually the better choice. Swing gates require level ground across their full arc, and on grades steeper than about 3%, they either drag at the low side or leave a gap at the high side. Sliding gates run on a level track that we install with proper drainage, and the operator pushes horizontally rather than lifting against gravity. For moderate grades, an uphill swing operator is possible but adds complexity and cost. During our free site visit, we measure your exact grade, check your available side space for track run, and recommend the configuration that will operate reliably for years. Call (833) 754-7503 to schedule.
Ready for a gate that works right and stays working? Call Ironworks Gate Co. at (833) 754-7503 for your free, upfront estimate. A live person answers 24 hours a day, 7 days a week. Every installation is backed by our written 90-Day Done Right Promise, and we offer a permanent 5% Senior and Veteran discount.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burbank since 1984.