Fast, Reliable Gate Repair Across Burbank
Gate repair in Burbank typically costs $180-$650 depending on the problem, and most jobs are completed in a single visit with same-day availability for urgent issues. A live person answers our phones 24 hours a day, 7 days a week at (833) 754-7503, and our technicians usually reach Burbank homes within 45 minutes to an hour from dispatch.
We’ve been repairing gates in Burbank since 1984. We know the ranch homes along Olive Avenue with their 1970s wrought-iron additions, the steeper lots climbing toward the Verdugo Mountains in the 91501 ZIP, and the high-cycle automated gates near the studio corridors in 91505 and 91506 that see more daily use than almost any residential gates in the San Fernando Valley. That local knowledge means we arrive with the right parts and the right fix already in mind.
Why Ironworks Gate Co. Is Burbank’s Preferred Gate Repair Company
Burbank homeowners have called us back for forty-two years because we treat the 400th job with the same care as the first. Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. They work in your driveway the way they would work in their own mother’s.
We are not a generalist handyman service passing through town. We are dedicated gate specialists, trained and equipped on nine automation brands including Viking, Ghost Controls, and DoorKing. When a Burbank homeowner calls with a FAAC operator throwing error codes or an Elite system that won’t respond to the keypad, we do not guess. We diagnose and repair on the first visit.
Every repair is protected by our 90-Day Done Right Promise, the Keystone Standard. Written guarantee, no paperwork, no arguing. If it is not right, we come back and make it right. No exceptions.
We also keep our standing offers active for Burbank customers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Our Gate Repair Services in Burbank
Hinge Repair
Burbank’s hard water is harder on gate hinges than most homeowners realize. Burbank Water and Power delivers mineral-laden water that accelerates corrosion on exposed steel hardware, and when sprinkler systems wet gate posts daily, that corrosion moves fast. We see seized hinges on ranch-home gates near Olive Avenue and Reese Place that should have lasted another decade. We remove the damaged hardware, clean the mounting surfaces, and install stainless steel or galvanized replacements that hold up to BWP’s water chemistry. Typical hinge repair in Burbank runs $180-$320.
Post Repair
Gate posts in Burbank take abuse from two directions: Santa Ana winds funneling through the Newhall and Cajon passes at 50-70 mph, and the lateral strain of steep driveways in the Verdugo foothill neighborhoods like Country Club Estates. A post that leans even an inch throws off the entire gate geometry. We reset posts in concrete with proper depth and drainage, or we sister and weld steel reinforcement where the original post can be saved. Post repair in Burbank typically costs $280-$550 depending on access and whether the footing must be re-poured.
Weld Repair
The wrought-iron and tubular steel gates added to Burbank’s post-WWII ranch homes in the 1970s through 1990s are reaching the end of their original weld life. Cracked joints at stress points, rust-weakened pickets, and broken scrollwork are common on homes between Magnolia Boulevard and Alameda Avenue. Our welders work in the field with portable MIG and TIG rigs, matching the original metal and finish so the repair does not advertise itself. Weld repair in Burbank generally runs $220-$480 based on material and access.
Gate Realignment
A gate that drags, binds, or won’t latch is usually a geometry problem. In Burbank, we trace misalignment to three local causes more often than not: wind-warped panels, post shift from hillside settling on south-facing lots, and track wear from high-cycle operation in the studio-district neighborhoods. We measure the opening, check level and plumb, adjust or replace rollers and guides, and reset the operator travel limits. Realignment service in Burbank costs $200-$380 for most residential gates.
Rust Treatment
We treat rust as a structural problem, not a cosmetic one. In Burbank’s older neighborhoods, we grind failed coatings to bare metal, apply phosphoric acid conversion coating, and finish with primer and paint matched to the gate’s original color. For hardware that cannot be saved, we spec stainless or galvanized replacements. Rust treatment in Burbank runs $160-$340 for localized work, with full gate refinishing quoted separately.
Lock Repair
Mag locks, deadbolts, and electric strikes on automated Burbank gates fail from moisture intrusion, misalignment, or simple mechanical wear. We carry replacement locks and solenoids for most brands, and we can rekey to match your existing house key where the hardware supports it. Lock repair in Burbank typically costs $150-$290.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We maintain certification and field inventory for nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Burbank customers, this means the correct part is already on the truck when we arrive. We do not order and return. We do not make a second trip because the motor was wrong. We stock controllers, limit switches, safety loops, and replacement arms for Viking and DoorKing systems locally, which matters when your gate is stuck open at 10 PM and you live on a studio corridor with steady foot traffic. Most brand-specific repairs in Burbank are completed in under two hours.
Common Gate Repair Problems We See in Burbank Homes
- High-cycle operator burnout in 91505 and 91506. Gates near the studio districts cycle 20 to 40 times daily, far above the residential average of 4 to 6. That volume burns through motor brushes, overheats controllers, and fatigues drive chains twice as fast as the manufacturer rated them for. We upgrade to heavy-duty operators where the duty cycle demands it.
- Santa Ana wind damage, October through March. Gusts of 50-70 mph warp tubular steel panels, strip hinge fasteners from wooden posts, and overload safety sensors. We get calls the morning after every major wind event. Reinforced bracing and upgraded hinge hardware prevent repeat damage.
- Hard-water corrosion on hardware and anchors. BWP’s mineral content is hard on steel. Sprinkler overspray wets posts daily, and below-grade hinge anchors rust through in five to seven years instead of fifteen. We spec stainless hardware and proper drainage on every replacement.
- Steep-driveway track wear in north Burbank. The grade change from Verdugo foothill lots puts lateral load on ground tracks and operator arms that flatland gates never see. We see accelerated roller wear and bent track sections in Country Club Estates and similar neighborhoods, and we address the geometry, not just the symptom.
Pricing for Gate Repair in Burbank, CA
We settle on an upfront price before we turn a single bolt. No surprises on the bill.
| Service | Typical Range in Burbank |
|---|---|
| Hinge repair / replacement | $180 - $320 |
| Post repair / reset | $280 - $550 |
| Field weld repair | $220 - $480 |
| Gate realignment | $200 - $380 |
| Rust treatment (localized) | $160 - $340 |
| Lock / electric strike repair | $150 - $290 |
| Operator diagnosis & repair | $240 - $650 |
| Seasonal tune-up | $89 |
What moves a job toward the higher end: steep driveway access requiring special equipment, rust damage requiring multiple hardware replacements, operator replacement on a high-cycle gate, or electrical runs for access control upgrades. We diagnose before we quote, and estimates are always free. Call (833) 754-7503 for your exact number.
We Also Serve Cities Near Burbank
Our Gate Repair team covers the full San Fernando Valley and beyond. We regularly work in Universal City, North Hollywood, Glendale, and Valley Village from our Los Angeles base, with response times under an hour to most of these neighborhoods. If you are searching for Gate Repair in Burbank or any surrounding community, the same technician, same pricing, and same 90-Day Done Right Promise apply.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Burbank
Burbank Water and Power delivers water with notably high mineral content, and when that water hits exposed steel hardware through sprinkler overspray, corrosion accelerates. Glendale’s water chemistry and soil conditions are different, and we simply do not see the same five-to-seven-year hinge failure pattern there that we see on ranch-home gates near Olive Avenue and Reese Place in Burbank. We now spec stainless steel hinges as standard on Burbank replacements. Call (833) 754-7503 for a free inspection of your hardware condition.
Yes, if your driveway grade exceeds about 8 percent, a standard residential operator will strain and fail prematurely. The lateral load on the gate and the extra force needed to pull uphill both increase motor duty cycle and wear. We install heavy-duty operators rated for high-cycle, high-load conditions on steep Burbank lots, particularly in the 91501 ZIP near Country Club Estates. The upgrade pays for itself in extended motor life. Call for an assessment of your driveway grade and operator sizing.
High-cycle gates in the 91505 and 91506 studio corridors should be serviced every four to six months, not annually. Thirty or more daily cycles deplete grease, wear rollers, and fatigue electrical connections faster than standard residential use. Our $89 seasonal tune-up includes chain tension check, hinge lubrication, safety sensor alignment, and controller diagnostic. Many Burbank studio-area homeowners schedule tune-ups in March and September, before and after the heaviest wind season. Call to set up a recurring schedule.
Yes. We regularly repair and restore wrought-iron gates on the post-WWII ranch homes and bungalows that dominate Burbank’s residential core, many built from the late 1940s through the 1960s. We match original scrollwork, replicate failed welds, and can refinish to period-appropriate coatings. We do not replace character with generic alternatives unless the homeowner specifically requests it. Call (833) 754-7503 to discuss your gate’s condition and our restoration approach.
Most routine gate repairs, hinge replacements, and operator repairs do not require a permit in Burbank. However, new automated gate installations, significant electrical work, or structural post replacements may trigger Burbank Building and Safety review, particularly if the gate fronts a public sidewalk or alley. We know the local requirements and will flag any job that needs permitting before we begin. We handle the paperwork where required. Call to discuss your specific project.
Ready to get your gate working right? Call (833) 754-7503 now. A live person will answer, 24 hours a day, 7 days a week. We’ll give you a free estimate, show up when we say, and back the repair with our written 90-Day Done Right Promise. Done right, and backed in writing. That’s the only way we do it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burbank since 1984.