Fast, Reliable Gate Parts & Welding Across Burbank
Gate parts and welding repair in Burbank typically runs $180-$650 depending on the component, and most jobs are completed in a single visit with upfront pricing settled before we start. We’re familiar with the post-war ranch homes and aging wrought-iron gates that define Burbank’s neighborhoods, from the studio corridors near Olive Avenue to the hillside lots along the Verdugo foothills. If your hinge has seized, your post is rusting through, or your gate panel has warped in last week’s Santa Ana winds, call us at (833) 754-7503. A live person answers 24 hours a day, 7 days a week.
Our Gate Parts & Welding team has been serving the San Fernando Valley since 1984. We know the difference between a gate that needs a new roller and one that needs a full post replacement, and we do not recommend work you do not need.
Why Ironworks Gate Co. Is Burbank’s Preferred Gate Parts & Welding Company
Burbank homeowners have called us for over four decades because we treat the 400th job with the same care as the first. Our technicians are background-checked, uniformed, and guided by our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. That is not a slogan on a truck. It is how we work in your driveway.
We have built a strong local reputation across the 91521, 91522, 91523, and 91526 ZIP codes, with particular concentration in the 91505 and 91506 areas near the studio districts where automated gates see heavy daily use. Burbank residents remember the last contractor who let them down, and they stay with companies that show up when promised and stand behind the work in writing.
Our response time to Burbank is typically same-day or next-day for standard calls, and we carry an extensive parts inventory so we are not ordering components while your gate hangs open. Every completed job is protected by our 90-Day Done Right Promise, known internally as the Keystone Standard: written, no paperwork, no arguing. If it is not right, we come back and make it right.
We also understand the local conditions that break gates in Burbank. The hard water delivered by Burbank Water and Power accelerates corrosion on exposed steel hardware, especially when sprinkler systems keep gate posts wet. The Santa Ana winds that funnel through the Cajon and Newhall passes regularly hit 50-70 mph gusts on the valley floor, warping panels and stripping hinges. And the steeper driveway grades on south-facing foothill lots put extra strain on operators and ground tracks. This is not generic gate repair knowledge. It is what we have learned from thousands of Burbank service calls.
Our Gate Parts & Welding Services in Burbank
Hinge Replacement
Hinges are the most common failure point on Burbank’s aging wrought-iron and tubular steel gates. The combination of hard-water mineral deposits and sprinkler moisture corrodes the pin and barrel years faster than in coastal cities. A typical hinge replacement in Burbank runs $180-$340 for a standard residential gate, including removal of the seized hardware and installation of a corrosion-resistant kit. Near the Verdugo foothills, we also see hinges snap when Santa Ana gusts warp the gate panel and put lateral stress on hardware that was already weakened by rust.
Our crew recently replaced seized rollers and a rusted-out hinge on a 1980s tubular steel gate near Olive Avenue in 91505. The original FAAC operator had burned out from the extra drag, and the homeowner’s sprinklers had turned the bottom of the gate post into a mineral-crusted rust column. We retrofitted a new LiftMaster operator with a corrosion-resistant hinge kit. The gate now moves smoothly, and the homeowner’s water bill is no longer accelerating hardware failure.
Post Replacement
When a gate post rots or rusts through at grade, the entire gate system becomes unstable. In Burbank’s post-war ranch neighborhoods, we frequently find that original steel posts installed in the 1970s-1990s have lost their structural integrity below the surface, where hard-water deposits and constant soil moisture create accelerated corrosion that is invisible until the gate starts leaning. Post replacement in Burbank typically costs $450-$650, including excavation, concrete work, and re-hanging the gate on a properly aligned new post.
We use galvanized or powder-coated posts with below-grade corrosion protection, and we adjust for Burbank’s hillside grades where a plumb post on a sloped driveway requires precise calculation. A post replacement is not a temporary fix. Done right, it should outlast the original by decades.
Rail Repair
Bent or broken rails on wrought-iron gates are common after Santa Ana wind events, particularly on gates with decorative scrollwork that catches wind like a sail. Rail repair in Burbank runs $220-$400 depending on the extent of damage and whether the rail can be straightened or must be section-replaced. We match existing profiles where possible, and we reinforce weak points that contributed to the failure. On hillside properties in north Burbank, we also check for gate-frame racking caused by uneven ground settlement, which puts chronic stress on rails even without wind loading.
Custom Welding
Not every gate failure fits a catalog part. Custom welding in Burbank covers cracked frame joints, broken latch mounts, and reinforcement of aging wrought-iron designs that were never intended for modern automated operation. Our welding services start at $280 for basic repairs and range to $550+ for extensive frame reinforcement or fabrication of replacement components. We weld in place where possible, minimizing the disruption of removing a heavy gate panel. For estate gates near the studio districts that see 20+ cycles daily, we can add gusset plates and stress-relief joints that extend service life under high-cycle use.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We are trained and equipped on nine major gate-automation brands, and we stock local parts for Burbank customers to keep turnaround short. Our technicians carry components for Viking, Ghost Controls, and DoorKing operators, among others, and we maintain inventory of discontinued-compatible receivers for older systems that manufacturers no longer support. Whether your gate has a current-model Elite operator or a 1990s BFT controller that has finally failed, we have the parts knowledge to source the correct fix without guessing. Most Burbank jobs are completed in a single visit because we arrive with the right components already on the truck.
Common Gate Parts & Welding Problems We See in Burbank Homes
- Santa Ana wind damage to gate panels and hinges. The 50-70 mph gusts that funnel through the Cajon and Newhall passes regularly warp wrought-iron panels and strip corroded hinges off posts, particularly on hillside properties with exposed southern exposures.
- Hard-water corrosion of rollers and post hardware. Burbank Water and Power’s mineral-rich water, combined with sprinkler systems that keep gate posts perpetually damp, seizes rollers and turns below-grade hinge anchors into rust columns years before coastal equivalents fail.
- Operator burnout from high-cycle use near studio districts. Automated gates in the 91505 and 91506 ZIPs near Warner Bros. and Disney are cycled 20+ times daily, burning out motors and controllers designed for typical residential use patterns.
- Obsolete single-button receivers with no replacement available. Many 1970s-1990s gates in Burbank’s ranch-home neighborhoods have original radio receivers that manufacturers discontinued decades ago, requiring full opener retrofit to restore remote operation.
Pricing for Gate Parts & Welding in Burbank, CA
| Service | Typical Range in Burbank |
|---|---|
| Hinge replacement (standard residential) | $180 - $340 |
| Gate roller replacement (set of 4) | $220 - $380 |
| Rail repair / straightening | $220 - $400 |
| Custom welding (basic repair) | $280 - $400 |
| Custom welding (extensive / fabrication) | $400 - $550+ |
| Post replacement with concrete | $450 - $650 |
| Operator retrofit (parts + labor) | $680 - $1,400 |
These ranges reflect Burbank’s market conditions: higher labor costs than inland counties, but competitive with Glendale and North Hollywood. What moves a job toward the higher end is hillside access, buried utilities that complicate post replacement, and the need to match obsolete hardware with modern equivalents. We settle on an exact upfront price before turning a single bolt, and our estimates are free. Call (833) 754-7503 to schedule.
Standing offers for Burbank customers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Burbank
Our service area extends throughout the San Fernando Valley and adjacent communities. We regularly run calls to Universal City, North Hollywood, Glendale, and Valley Village from our Los Angeles base, and we understand the distinct conditions in each: Glendale’s older estate gates, North Hollywood’s mixed housing stock, the hillside grades that differentiate each city’s repair challenges. If you are searching for Gate Parts & Welding in Burbank or anywhere nearby, the same live answer and same-day scheduling applies.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Burbank
Burbank Water and Power delivers water with notably high mineral content, and when that hard water combines with sprinkler systems that wet gate posts daily, the corrosion accelerates dramatically. Glendale’s water source and soil chemistry do not produce the same mineral-crust buildup on exposed steel. The fix is corrosion-resistant hinge hardware and, where possible, redirecting sprinkler spray. Call (833) 754-7503 for a free inspection and exact quote.
Yes, we weld broken latch mounts and fabricate replacement components for aging wrought-iron gates throughout the 91505 and 91506 ZIPs near the studio district. We match existing profiles where possible and reinforce weak points that caused the original failure. Most welding repairs near Warner Bros. are completed in a single visit. Call (833) 754-7503 to schedule.
It depends on whether the burnout was caused by operator overload or by underlying mechanical drag from a damaged gate. We inspect the entire system: if the motor failed because warped panels or seized hinges forced it to work too hard, replacing only the operator will burn out the new one too. A typical operator retrofit in Burbank runs $680-$1,400 including diagnosis, parts, and labor. Call (833) 754-7503 for same-day evaluation.
We do not stock original BFT receivers from the 1990s because the manufacturer discontinued them years ago, but we carry modern universal and brand-compatible receivers that retrofit to older BFT control boards and restore remote operation. The alternative is a full opener replacement, which we quote both ways so you can decide. Call (833) 754-7503 for a free second opinion on any written estimate.
High-cycle gates near the Burbank studio corridors should have rollers inspected annually and typically need replacement every 3-5 years, compared to 7-10 years for standard residential use. Hard-water corrosion and Santa Ana dust accelerate wear even further. Our $89 seasonal tune-up includes roller inspection, track cleaning, and lubrication. Call (833) 754-7503 to schedule.
Ready to get your Burbank gate working right? Call Ironworks Gate Co. at (833) 754-7503 any time, day or night. A live person will answer, schedule your free estimate, and give you an upfront price before any work begins. Done right, and backed in writing with our 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burbank since 1984.