Ghost Controls Gate Repair in Houston, CA | Ironworks Gate Co.
We provide independent Houston Gate Repair for Ghost Controls across the inner-loop neighborhoods, with same-day response for most TSSU2 and TSSU1 failures. The thing that sets our work apart here is simple: we’ve replaced enough flood-fried TSSU2 boards in Midtown and Montrose to know which townhome complexes have grouped, grade-level operator boxes before we even pull up. Call (833) 754-7503 for a free estimate - most repairs are done in one visit, with upfront pricing settled before we touch a bolt.
Why Houston Residents Choose Us for Ghost Controls Service
Victor Salinas, our owner, grew up in Boyle Heights watching a neighbor weld wrought-iron gates, then trained in metal fabrication at Los Angeles Trade-Technical College before spending decades on gates and operators across the LA basin. That background matters when a Houston gate post has heaved in Beaumont clay and the weld itself needs correction, not just the operator.
We’ve completed hundreds of Ghost Controls sales & service calls in Houston, and our crew carries OEM boards, motors, and the waterproof gasket kits that actually hold up here. We’re not authorized by Ghost Controls - we’re independent. That means no corporate repair scripts, no waiting on manufacturer approval for a common-sense fix, and no pressure to replace equipment that can be saved. Our 90-Day Done Right Promise applies to every job, written and with no paperwork to file. A live person answers our phone 24 hours a day, 7 days a week. Background-checked, uniformed technicians. The 400th job gets the same care as the first.
Common Ghost Controls Gate Repair Problems We Solve in Houston
- TSSU2 board failure after conduit flooding. Houston’s 50-plus inches of annual rainfall and routine sheet-flooding in inner-loop streets submerges ground-level operator boxes. We see this most in Midtown and Montrose townhome complexes where builders mounted TSSU2 units at grade. The control board fries, and often the same conduit run takes out multiple units in one complex.
- TSSU1 limit switch misalignment from clay soil heave. Beaumont black clay shrinks and swells dramatically across wet and dry cycles. A gate post shifts even a quarter-inch, and the TSSU1 loses its stop position. The motor keeps hunting for a limit that no longer exists. We realign the gate, reset the switches, and shim the post if needed.
- Rusted TSSU1 hinge pin bracket on wrought-iron swing gates. Near-year-round humidity in Houston accelerates corrosion far faster than in Dallas or Austin. The steel bracket seizes, the motor strains, and eventually burns out. We replace with US-made aftermarket steel that resists this climate better than the original, and treat the surrounding frame.
- TSSU2 chain tension sensor false trips after rain events. Sheet-flooding deposits mud and debris in the chain channel. The sensor reads abnormal tension and stops the gate mid-cycle. We clean, recalibrate, and inspect the chain for stretch - a 15-minute fix if caught early, a full chain replacement if ignored.
- GTO keypad and transmitter failures from moisture intrusion. The accessory line isn’t immune. Keypad housings crack, sealant degrades, and Houston humidity finds its way in. We stock replacement GTO units and can often swap one same-day.
Ghost Controls Service in Houston: What Local Conditions Mean for Your Equipment
After any 3-inch rain in Midtown, our phone rings with 5-plus same-day calls from the same townhome complex - all TSSU2 units on the same flooded conduit run - requiring simultaneous board replacements. This is not a random pattern. It’s a predictable consequence of how inner-loop Houston was developed during the 2000s-2020s townhome boom: builders packed gated communities onto infill lots, ran shared electrical conduit at grade level, and mounted Ghost Controls operator boxes where street flooding reaches first. In Montrose, on Roseland Street and similar blocks, we’ve learned to ask which building number and which side of the complex before we even load the truck. The density of automated residential gates on chronically shifting clay, combined with our Houston service area‘s extreme rainfall and flood-prone streets, creates a repair environment unlike Dallas, Austin, or any other Texas metro. A gate tech who treats this like a standard operator failure will replace the board and leave the box to flood again. We don’t. We dry the enclosure, install the OEM replacement, and add waterproofing that accounts for the next storm.
Ghost Controls Models & Products We Service in Houston
We work on the full Ghost Controls residential line: the TSSU2 standard-duty slide gate operator, the TSSU1 standard-duty swing gate operator, and the TSSU2-2 dual slide for larger shared-driveway gates. The GTO accessory line - keypads, transmitters, receivers - is also in our standard inventory.
For control boards and motors, we use genuine Ghost Controls OEM parts. Compatibility is non-negotiable when a TSSU2 is hunting for its factory diagnostic parameters. For brackets, hinges, and hardware, we switch to US-made aftermarket steel with better corrosion resistance against Houston’s humidity. We stock TSSU2 and TSSU1 boards locally for Houston service area calls, which is how we complete most Ghost Controls jobs in a single visit.
Ghost Controls Service Pricing in Houston
Most Ghost Controls repairs in Houston fall between $180 and $475, depending on what’s failed. A TSSU1 limit switch realignment runs toward the lower end. A TSSU2 board replacement after flooding, with waterproofing, runs higher. Full motor replacement on a TSSU2-2 dual slide is the upper range.
We settle on an upfront price before turning a single bolt. No surprises on the bill. Our $89 Seasonal Tune-Up catches chain stretch, bracket corrosion, and seal degradation before they become mid-cycle failures. Senior and Veteran discount is 5%, always. Call (833) 754-7503 for an exact quote - estimates are free.
Serving Houston, CA - Our Local Coverage Area
We’re based in the Houston area and offer Gate Installation in Houston - we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Houston
My Ghost Controls TSSU2 gate stops halfway open after rain - what’s wrong?
The chain tension sensor is likely reading debris or mud deposited by sheet-flooding. We clean the channel, recalibrate the sensor, and inspect the chain for stretch. If the operator box itself took water, the board may need replacement. Call (833) 754-7503 - we can usually diagnose this in one visit.
Can you fix a Ghost Controls swing gate that’s scraping the concrete?
Yes. In Houston, this is almost always gate post heave from Beaumont clay expansion and contraction - we also handle Ghost Controls repair in Pasadena with the same expertise. We realign the gate, reset the TSSU1 limit switches, and address the root cause - shimming or resetting the post - not just the symptom. Call (833) 754-7503 for a free estimate.
Do you install Ghost Controls battery backups?
We install compatible battery backup systems for TSSU1 and TSSU2 operators. Given Houston’s storm-related power outages, this is a practical addition for any gate that serves as primary property access. We stock the units and can add one during a repair visit or as a standalone call.
How long does a Ghost Controls motor last in Houston’s climate?
A TSSU1 or TSSU2 motor typically runs 8-12 years in normal conditions. In Houston, humidity corrosion and flood exposure cut that toward the lower end if the operator box isn’t protected. Our $89 Seasonal Tune-Up extends motor life by catching moisture intrusion and bracket seizure early. Call (833) 754-7503 to schedule.
My townhome complex has 20 TSSU2 gates - can you come after a flood to check them all?
Yes. We’ve handled multi-unit calls in Montrose and Midtown complexes where shared conduit runs took out entire blocks of operators. We prioritize safety-critical access gates, assess each unit systematically, and stock enough OEM boards to handle bulk replacement without return trips. Call (833) 754-7503 - we answer live 24/7.
Service Areas Near Houston
We run Ghost Controls service calls throughout inner-loop Houston and travel to surrounding metros for larger estate gate projects. We also maintain dedicated Ghost Controls crews in Ghost Controls service in Dallas and Ghost Controls service in Austin, with the same OEM parts inventory and 90-Day Done Right Promise.
Book Your Ghost Controls Service in Houston Today
A gate should open when you need it to and stay closed when you don’t. Everything else is just the work. If your Ghost Controls operator is failing, scraping, or dead after the last rain, call (833) 754-7503. A live person will answer, day or night. We’ll give you an upfront price, show up when we say, and stand behind the repair with our written 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Houston since 1984.