Ghost Controls Gate Repair in Austin, CA

Ghost Controls Gate Repair in Austin, CA | Ironworks Gate Co.

We provide independent Austin Gate Repair for Ghost Controls systems, not as an authorized dealer, but as a specialist who has worked on hundreds of these units in Travis County clay and heat. The one thing that makes our Ghost Controls work here different: we know that a TSS2 control board failure in August and a TSS3 gear strip after spring rains are two symptoms of the same Austin soil problem, and we fix the ground before we fix the gate. Call (833) 754-7503 for same-day service and upfront pricing.

Call (833) 754-7503

Why Austin Residents Choose Us for Ghost Controls Service

Victor Salinas grew up in Boyle Heights watching a neighbor weld wrought-iron gates, then trained at Los Angeles Trade-Technical College before spending decades on gates and operators across the LA basin. He started Ironworks Gate Co. in 1984, and over forty-two years later, his daughter helps run the office while he still shows up to look at problems honestly. That background matters when your Ghost Controls system quits on a Sunday evening in Mueller or the Hill Country edges.

We are trained and equipped on nine automation brands, including Ghost Controls, which means we carry TSS1, TSS2, and TSS3 circuit boards and motors in our Austin-area inventory. Most repairs finish in one visit. We settle on a price before turning a single bolt, and every job carries our written 90-Day Done Right Promise. A live person answers our phones 24 hours a day, 7 days a week. No voicemail trees. No callback queues.

We are not manufacturer-authorized. We are the company that makes a 40-year-old gate close like the day it was hung.

Common Ghost Controls Gate Repair Problems We Solve in Austin

• Control board failure in TSS2 dual-swing units from sustained 100°F+ heat. Austin’s August sun warps capacitors in exposed TSS2 enclosures, particularly on west-facing installations in Mueller and the Domain corridor. We stock replacement boards and upgrade ventilation when the original housing design traps heat.
• TSS3 sliding gate motor gear stripping from uneven tracks. Austin’s iron-rich, shrink-swell clay shifts gate posts 1-3 inches between drought and rainfall, throwing slide gates off their tracks and overloading the TSS3’s nylon gear train. We re-plumb the post, pour deep concrete pier footings, and replace the gear set.
• WGS wi-fi module dropout in Hill Country limestone estates. Dense limestone walls block the WGS internal antenna, causing intermittent connectivity. We retrofit external antenna kits with shielded cable runs to maintain signal through stone and steel.
• Battery backup failure during sub-20°F winter events. Winter Storm Uri proved that Ghost Controls’ standard sealed lead-acid batteries freeze and crack in unprotected enclosures. We install cold-rated AGM replacements with insulated battery boxes for Austin’s occasional hard freezes.
• Cedar frame warping causing gate binding and motor overload. Weeks above 100°F warp cedar and pine driveway gates common in Hyde Park and Bouldin Creek bungalows, forcing Ghost Controls motors to strain against misalignment until they fault out. We true the frame and adjust limit switches to match.

Ghost Controls Service in Austin: What Local Conditions Mean for Your Equipment

Austin’s expansive black clay soil does not forgive shortcuts. The same iron-rich, shrink-swell clay that makes Hill Country wine possible makes gate posts heave, lean, and twist with every shift between drought and rain. In Houston’s sandier soils, a gravel-packed post might hold for years. In Austin, it will not hold for six months.

This is why we treat deep concrete pier footings as essential, not optional, on every Gate Installation - Austin project for Ghost Controls swing gates from Travis Heights to the eastern 78725 ZIP codes. A standard 24-inch depth might satisfy a national install manual, but we pour 30-inch piers with rebar cages because we have been called back to re-hang the same gate twice when someone else skipped this step. The clay does not care about your warranty paperwork. It cares about mass and depth below the frost line.

For Ghost Controls owners specifically, this soil reality means that a TSS1 or TSS2 motor working harder against a slowly leaning gate will burn out its control board months or years before design life. We fix the footing first. Then we fix the motor. Done right, and backed in writing.

Ghost Controls Models & Products We Service in Austin

We work on the full Ghost Controls residential and light-commercial line: the TSS1 single-swing series, TSS2 dual-swing, TSS3 sliding gate operator, and the WGS wi-fi-enabled family. Our Austin-area service vehicles carry OEM Ghost Controls circuit boards, motor assemblies, and limit switch kits for same-day repair on these model families.

When OEM parts sit on backorder, which happens more than it should, we source quality aftermarket batteries and wi-fi modules and tell you exactly what you are getting and why. We also show you the repair-versus-replace numbers before any work starts. A square deal: upfront price, no surprises on the bill.

Our Ghost Controls sales & service covers everything from keypad reprogramming to full motor replacement, always with the 90-Day Done Right Promise applied.

Ghost Controls Service Pricing in Austin

FAQs - Ghost Controls Gate Repair in Austin

Do you offer same-day repair for Ghost Controls gates in Austin?

Yes. We stock TSS1, TSS2, TSS3, and WGS parts locally and complete most Ghost Controls repairs in a single visit. Call (833) 754-7503 before noon for same-day scheduling.

Will a Ghost Controls system work with Austin’s power fluctuations?

Ghost Controls battery backup systems handle brief outages, but Austin’s summer grid strain and winter storm load shedding can outlast standard sealed lead-acid reserves. We upgrade to cold-rated AGM batteries with higher reserve capacity for local conditions.

How do I choose between Ghost Controls TSS2 and TSS3 for my Hill Country gate?

TSS2 dual-swing fits most residential driveways under 16 feet total width. TSS3 sliding gate operators suit Hill Country estates with steep grades or limestone walls where swing arcs are impractical. We measure your grade, clearance, and gate weight on-site before recommending. Call (833) 754-7503 for a free assessment.

Can you repair a Ghost Controls gate that was installed by another company?

Yes. We are an independent service provider, not manufacturer-authorized, which means we work on any Ghost Controls installation regardless of who hung it. We diagnose honestly and quote only what the gate actually needs.

What happens to my Ghost Controls gate if the Wi-fi goes out during an Austin storm?

WGS series units revert to local remote and keypad control when wi-fi drops. The gate does not lock open or closed. If you need app access during outages, we can add a cellular backup bridge. Call (833) 754-7503 to discuss options.

Service Areas Near Austin

We serve our Austin service area and surrounding communities including Ghost Controls service in San Antonio and Ghost Controls service in Fort Worth. Our technicians also travel to Los Angeles, San Jose, San Francisco, Sacramento, Fresno, and Long Beach for estate gate and automation projects.

Book Your Ghost Controls Service in Austin Today

A gate should open when you need it to and stay closed when you don’t. Everything else is just the work. If your Ghost Controls system is binding, beeping, or dead in the August heat, call (833) 754-7503. A live person answers, 24 hours a day, 7 days a week. We will be there when we say.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Austin since 1984.