Fast, Reliable Gate Repair Across White Plains
Gate repair in White Plains, NY typically runs $180-$650 depending on the problem, and most calls are completed in a single visit with same-day or next-day scheduling. We’re Ironworks Gate Co., and we’ve been keeping gates swinging and sliding properly since 1984. If your driveway gate is sagging on its hinges, your condo’s slide gate operator quit working, or you’re dealing with rust damage from another Westchester winter, our Gate Repair team will give you an upfront price before we turn a single bolt. Call us at (833) 754-7503 - a live person answers, 24 hours a day, 7 days a week.
White Plains isn’t like the purely suburban towns around it. This is Westchester County’s urban core, and that shapes every gate repair call we take here. You’ll find mid-century wrought-iron driveway gates on post-war colonials near Gedney Park, original slide-gate operators running past their service life along Mamaroneck Avenue condo corridors, and parking-garage roll-up gates serving downtown office parks. That dual commercial-residential workload is unique in Westchester, unlike the purely suburban gate market in neighboring towns such as Scarsdale or Harrison. We’ve worked on all of it.
Why Ironworks Gate Co. Is White Plains’s Preferred Gate Repair Company
We’ve been serving Westchester County homeowners and property managers for over 42 years. In that time, we’ve learned the specific failure patterns that White Plains’s climate and housing stock produce. The freeze-thaw cycles here are brutal on metal. We’ve replaced hinge pins seized solid on gates near the Bronx River Parkway, welded cracks in iron frames on colonial homes south of downtown, and realigned gates that have settled out of plumb after decades of ground heaving.
Our technicians are background-checked, uniformed, and guided by our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. We carry parts and are certified on nine gate-automation brands - Linear, Viking, Ghost Controls, DoorKing, and five others - so the correct fix is made on the first visit, whatever is on your driveway. Every job is backed by our 90-Day Done Right Promise, known internally as the Keystone Standard: written, no paperwork, no arguing. If it’s not right, we come back and make it right.
We recently replaced corroded hinge pins and a seized LiftMaster operator on a 1970s slide gate at a Mamaroneck Avenue condo complex where the original FAAC unit had failed completely, restoring access for 40+ units. That kind of legacy-hardware resurrection is what we do.
Our Gate Repair Services in White Plains
Hinge Repair
The original hinge pins on White Plains’s 1940s-1970s wrought-iron driveway gates weren’t built for decades of Westchester freeze-thaw cycling. Water works into the pin housing, freezes, expands, and seizes the pin solid. We’ve freed hinges that haven’t moved in years on homes near Gedney Park and replaced completely failed pin-and-barrel assemblies on split-level properties east of downtown. A typical hinge repair or replacement in White Plains runs $180-$340. If the gate post itself has rotted or shifted, we’ll tell you straight - no point in new hinges on a leaning post.
Weld Repair
Iron gates crack at the welds. It’s the nature of the material, especially when thermal cycling from White Plains winters meets the additional stress of a gate that’s gone out of alignment. Salt spray from I-287 and the Bronx River Parkway road treatment doesn’t help - it accelerates corrosion at weld joints, creating stress risers that fail under load. Our welders work in the field, not back at some distant shop, so we can repair cracked picket-to-frame joints, broken scrollwork, and failed gate-stop welds where your gate lives. Most weld repairs in White Plains fall between $220-$450 depending on access and material thickness.
Gate Realignment
A gate that drags, binds, or won’t latch is usually a geometry problem. Posts settle. Holes elongate. Ground heaves through freeze-thaw cycles. We’ve realigned gates on White Plains homes where the original concrete footing has cracked and shifted, and on condo-complex slide gates where the track has worked loose from decades of vibration. Realignment typically costs $200-$380 in White Plains. Sometimes the fix is shimming and hardware adjustment. Sometimes the post needs resetting. We’ll show you what’s actually wrong before we quote.
Post Repair
Wooden gate posts rot at the ground line. Steel posts rust through from the inside out, especially where road salt accumulates. We’ve replaced posts on older White Plains estates where the original cedar post has turned to sponge, and on commercial properties where the steel tube has thinned to paper. Post repair or replacement ranges from $280-$550 in White Plains, with concrete work and proper drainage included when needed.
Lock Repair and Rust Treatment
Lock mechanisms on White Plains gates take a beating from moisture and salt. We’ve rebuilt mortise locks on estate gates, replaced electric strikes on condo access systems, and treated rusted surfaces before they become structural problems. Rust treatment and lock repair together typically run $160-$320. Caught early, rust treatment extends a gate’s life by years. Left alone, it becomes a weld-repair or full-replacement job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Plains
We maintain certification and carry parts for nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For White Plains customers, this means we don’t order parts and make you wait - we stock the common failure items locally and can often complete operator repairs, control-board swaps, and safety-sensor replacements on the first visit. That matters when you’re managing a 40-unit condo building or your home gate is stuck open at 10 PM.
Common Gate Repair Problems We See in White Plains Homes
- Freeze-thaw seizure on older wrought-iron gates. White Plains cycles through freezing and thawing dozens of times each winter. Water enters hinge housings and weld joints, expands when it freezes, and locks pins solid or cracks frames. We see this most on post-war colonial and split-level homes whose original gates have never been serviced.
- Failed slide-gate operators in 1970s-1980s condo complexes. The apartment and condo buildings along Mamaroneck Avenue and Post Road corridors often have original operators that are 15-20 years past reasonable service life. Property managers defer maintenance until complete failure, which means emergency after-hours calls when the gate won’t open for morning traffic.
- Salt-spray corrosion from major roadways. Gates on properties near I-287, the Bronx River Parkway, and heavily treated arterial roads show accelerated rust on exposed steel and aluminum frames. The salt doesn’t just discolor the metal - it pits surfaces, attacks welds, and destroys powder-coat finishes from the underside out.
- Out-of-plumb gates on settled footings. White Plains’s older housing stock sits on footings poured decades ago. Ground movement, drainage problems, and frost heave tilt posts, elongate bolt holes, and turn a smooth-swinging gate into one that drags, binds, and eventually fails its operator through overload.
Pricing for Gate Repair in White Plains, NY
We’re plain about pricing because nobody likes surprises on the bill. Here’s what gate repair costs in the White Plains market:
| Service | Typical Range in White Plains |
|---|---|
| Hinge repair / replacement | $180 - $340 |
| Weld repair (field welding) | $220 - $450 |
| Gate realignment | $200 - $380 |
| Post repair / replacement | $280 - $550 |
| Lock repair + rust treatment | $160 - $320 |
| Operator diagnostics & repair | $250 - $580 |
| Emergency / after-hours service | Standard rate + $95 |
What moves the needle: access to the gate, material type (wrought iron vs. aluminum vs. steel), whether the post needs resetting, and whether we’re working with legacy parts that need fabrication. We settle the full price with you before work begins. Estimates are free. We also honor our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near White Plains
Our service area extends throughout central Westchester. We regularly handle Gate Repair in White Plains and neighboring communities including Hartsdale, Scarsdale, Greenburgh, and Irvington. The same technician, the same parts inventory, the same 90-Day Done Right Promise applies whether we’re working on your driveway gate or your condo’s access system.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in White Plains
They seize the pins solid and crack surrounding welds. Water enters the hinge barrel through worn seals or missing grease fittings, expands when it freezes, and locks the pin. In White Plains, this can happen dozens of times each winter. We remove seized pins, clean the housing, install new pins with proper lubrication, and replace cracked weld joints in the same visit. Call (833) 754-7503 for a free inspection - catching this early saves the hinge and often the gate frame.
Yes, and we do this regularly for White Plains HOA and condo properties. Intermittent failure usually points to a failing control board, worn limit switches, or degraded loop-detector wiring - all fixable. We stock replacement parts for legacy FAAC, LiftMaster, and DoorKing operators common in 1970s-1980s installations. If the operator is truly past recovery, we’ll quote a replacement with no pressure. Call (833) 754-7503 - we work directly with building supers and property managers, and estimates are free.
Most 1950s wrought-iron gates are worth repairing if the frame is structurally sound. The metal in that era was heavier-gauge than most modern production, and the craftsmanship is often superior. We evaluate the gate on-site: if the frame cracks are weldable, the posts are salvageable, and the design suits your property, repair is usually the better value - typically $400-$900 versus $2,500+ for quality replacement. If the iron has thinned from rust or the design no longer meets your needs, we’ll tell you straight. Call (833) 754-7503 and we’ll come look.
Salt spray accelerates corrosion on exposed steel and aluminum, and it attacks from the underside and inside surfaces where you can’t see it. Gates within a few hundred yards of I-287, the Bronx River Parkway, or heavily treated city streets show pitting, flaking powder coat, and weld-joint failure 3-5 years sooner than gates in sheltered locations. We treat active rust, weld cracks, and can recommend protective coatings appropriate to your gate’s exposure. Call (833) 754-7503 - early treatment extends service life significantly.
Yes. A live person answers our phone 24 hours a day, 7 days a week, and we prioritize calls where residents are locked in or out. For White Plains HOAs and condo complexes, we maintain direct relationships with several building management companies and can respond to your super’s call with the specific parts your system requires. Emergency service carries a $95 after-hours fee; the repair itself is priced at standard rates. Call (833) 754-7503 - we’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving White Plains since 1984.