Fast, Reliable Gate Parts & Welding Across White Plains
Gate parts and welding repair in White Plains typically runs $180-$650 depending on the component, and most jobs are completed in a single visit with upfront pricing settled before work begins. Ironworks Gate Co. has served the White Plains area for over 42 years, and our Gate Parts & Welding crew understands the unique demands of this market: from downtown condo complexes along Mamaroneck Avenue to the mid-century estates near Battle Hill and the Bronx River Parkway. We’re familiar with the local architectural review boards, the freeze-thaw punishment Westchester County dishes out, and the specific operator brands common in 1970s and 1980s buildings throughout the 10601, 10606, 10607, and 10610 ZIP codes. A live person answers our phones 24 hours a day, 7 days a week at (833) 754-7503.
Why Ironworks Gate Co. Is White Plains’s Preferred Gate Parts & Welding Company
We’ve been the company that makes a 40-year-old gate close like the day it was hung since 1984. In White Plains, that reputation was built on understanding two very different worlds: the downtown commercial and mixed-use buildings where noise ordinances govern every repair decision, and the established residential neighborhoods where homeowners’ associations enforce strict aesthetic standards on every visible component.
Our technicians are background-checked, uniformed, and trained on nine automation brands including FAAC, BFT, Linear, and Viking. That means when we arrive at a White Plains property, we carry the parts and the knowledge to finish the job without ordering components or making return trips. Most repairs are completed same-day.
We recently responded to a mid-winter call at a condo complex off Post Road where a pair of LiftMaster slide gates had sheared their mounting brackets due to repeated freeze-thaw. Our crew replaced the brackets with heavy-duty galvanized steel, realigned the tracks, and installed new Gate Rollers to prevent binding - all while coordinating with the HOA board to ensure the repair matched the complex’s original DoorKing color scheme.
Every job carries our 90-Day Done Right Promise, known internally as the Keystone Standard: written, no paperwork, no arguing. If it’s not right, we come back and make it right. We also offer $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Our Gate Parts & Welding Services in White Plains
Hinge Replacement
Hinge pins on mid-century wrought-iron gates throughout White Plains seize solid between November and March. The freeze-thaw cycles here are aggressive - Westchester County can swing from 20 degrees to 50 and back again dozens of times each winter. Water penetrates the barrel hinge, expands when it freezes, and welds the pin to the sleeve. We’ve cut free hinges on colonial-era iron gates near Battle Hill that hadn’t moved in two seasons. We replace them with stainless steel pins and bronze bushings that won’t corrode, and we realign the gate so it doesn’t hang crooked and stress the new hardware. A typical hinge replacement in White Plains runs $220-$380.
Custom Welding
Weld joints on 1970s-era iron frames crack as frost heave shifts gate posts millimeter by millimeter through the winter. We’ve restored structural integrity on gates near the Bronx River Parkway where the original factory welds had completely separated from the bottom rail. Our mobile welding rigs carry oxy-acetylene and MIG capability, so we can cut out corroded sections, fabricate replacement pieces from matching stock, and weld them in place without removing the gate from its posts. For HOA properties, we match existing color schemes and finishes to avoid architectural review violations. Custom welding in White Plains generally ranges from $280-$650 depending on material thickness and access.
Post Replacement
Gate posts in White Plains take punishment from two directions: the freeze-thaw heave that loosens concrete footings, and the salt spray from I-287 and the Bronx River Parkway that corrodes steel posts from the ground up. We excavate the old footing, pour new concrete with proper drainage, and set galvanized or aluminum posts that won’t rust through in five years. Post replacement in White Plains typically costs $450-$890.
Rail Repair
Bottom rails on ornamental iron gates collect water and debris, then rust from the inside out. We see this constantly on post-war colonials and split-levels built between the 1940s and 1970s. Our rail repair includes cutting out the damaged section, welding in replacement stock, and sealing the interior cavity to prevent recurrence. Rail repair in White Plains runs $180-$340.
Gate Rollers
Slide gates in downtown White Plains condo complexes - especially the 1970s and 1980s buildings along Mamaroneck Avenue and Post Road - rely on rollers that wear flat or seize after years of heavy cycling. We stock V-groove and flat-bottom rollers in multiple sizes, and we align the track system so the new rollers don’t inherit the wear pattern of the old ones. Gate roller replacement in White Plains is typically $160-$280.
Latch & Lock
Electric strikes and magnetic locks on automated gates fail when moisture infiltrates the mechanism. We replace them with weather-rated units and verify integration with the existing access control system, whether it’s a legacy DoorKing keypad or a modern telephone entry system. Latch and lock service in White Plains runs $140-$260.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Plains
We maintain factory-authorized training and parts inventory for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In White Plains specifically, we see heavy concentrations of DoorKing and LiftMaster in the older condo complexes, while FAAC hydraulic operators are increasingly specified for downtown mixed-use buildings where noise ordinances prohibit chain-driven units. We stock common failure items - brackets, rollers, limit switches, control boards - so White Plains customers aren’t waiting on freight from a warehouse three states away. Most brand-specific repairs are completed on the first visit.
Common Gate Parts & Welding Problems We See in White Plains Homes
- Hinge pins seized on mid-century wrought-iron gates in Battle Hill. The seasonal freeze-thaw cycles in this neighborhood are particularly severe due to elevation and exposure. We cut the old pins with oxy-acetylene and install stainless steel replacements that won’t seize again.
- Weld joints cracking on 1970s iron frames near the Bronx River Parkway. Ground heave from frost penetration shifts the gate frame while the posts stay relatively stable. The stress concentrates at the factory welds. We grind out the cracks, preheat the metal, and lay in new weld beads with matching filler rod.
- Buried actuator wiring failing in downtown condo towers. Frost lifts conduit and breaks direct-burial cable that wasn’t rated for the application. We trench with proper depth and backfill, then install direct-burial-rated cable with watertight splices.
- Slide-gate operators past service life in complexes along Mamaroneck Avenue. Property managers defer maintenance until total failure. We stock replacement operators that fit existing footprints and integrate with legacy keypads and loop detectors.
Pricing for Gate Parts & Welding in White Plains, NY
| Service | Typical Range in White Plains |
|---|---|
| Hinge Replacement | $220 - $380 |
| Gate Roller Replacement | $160 - $280 |
| Rail Repair | $180 - $340 |
| Latch & Lock Service | $140 - $260 |
| Custom Welding (mobile) | $280 - $650 |
| Post Replacement | $450 - $890 |
What moves a job toward the higher end: access difficulty, need for custom fabrication, coordination with HOA or building management for color matching, and emergency after-hours response. We settle the full price before turning a single bolt. Estimates are free. Call (833) 754-7503.
White Plains’s dual commercial-residential market creates pricing efficiency we pass along. Because we handle both downtown slide-gate operators and residential ornamental iron, our parts purchasing volume keeps costs reasonable. The $89 seasonal tune-up catches problems before they become emergency calls.
We Also Serve Cities Near White Plains
Our Gate Parts & Welding in White Plains operation extends to neighboring communities including Hartsdale, Scarsdale, Greenburgh, and Irvington. Each has distinct gate stock - Scarsdale’s newer estate gates, Irvington’s riverfront properties with wind exposure, Greenburgh’s mixed zoning - and we adjust our parts inventory and welding approaches accordingly. The same live-answer phone line and same-day priority applies throughout Westchester County.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in White Plains
Yes. We document the existing color, finish, and hardware specifications before beginning work, and we match replacement components to those standards. For the Post Road condo complex we mentioned, we coordinated directly with the HOA board to source DoorKing-matched powder coat. If your White Plains HOA requires pre-approval for visible alterations, we provide detailed scope descriptions and material samples on request. Call (833) 754-7503 to discuss your ARB requirements - estimates are free.
Yes. We stock replacement operators that fit the existing concrete pad and gate bracket geometry without requiring structural modifications. For a recent job near Mamaroneck Avenue, we replaced a 1982 LiftMaster with a current model that integrated with the existing loop detectors and keypad. The new unit fit the original footprint, so no ARB approval was needed. Call (833) 754-7503 to schedule an evaluation - estimates are free.
Freeze-thaw expansion of water in hinge barrels and track debris is the primary cause. White Plains cycles through freezing and thawing dozens of times each winter, and salt spray from nearby highways accelerates corrosion that makes sticking worse. The seasonal tune-up we offer for $89 includes hinge lubrication with low-temperature grease, track cleaning, and adjustment of roller clearance. Call (833) 754-7503 to schedule before the first hard freeze - estimates are free.
Yes. We bring mobile welding equipment to the site, preheat the casting to prevent cold cracking, and lay in matching filler metal. For a Battle Hill gate last February, we repaired a cracked bottom rail where frost heave had stressed the 70-year-old weld. The repair was ground smooth, primed, and painted to match the existing finish. Custom welding in White Plains runs $280-$650. Call (833) 754-7503 for an exact quote - estimates are free.
Yes. A live person answers our phones 24 hours a day, 7 days a week, and we maintain emergency response capability for White Plains properties. The cluster of 1970s-1980s apartment and condo complexes along Mamaroneck Avenue and Post Road generates predictable after-hours calls when deferred maintenance finally fails. We carry replacement operators, brackets, and rollers on our emergency vehicles. Call (833) 754-7503 - a real person will answer, and we’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving White Plains since 1984.