Fast, Reliable Gate Parts & Welding Across Greenburgh
Gate parts and welding repair in Greenburgh typically costs $180-$650 depending on the component, and most hinge, post, or rail jobs are completed in a single visit with same-day scheduling available. Our Gate Parts & Welding team has been answering calls from Greenburgh homeowners since 1984, and we understand the specific challenges of Hudson Valley estate gates, hillside driveways, and the freeze-thaw cycles that punish metalwork here. If your gate is sagging, rusted, or simply won’t close square anymore, call (833) 754-7503. A live person answers 24 hours a day, and we’ll give you an upfront price before any work begins.
Why Ironworks Gate Co. Is Greenburgh’s Preferred Gate Parts & Welding Company
We’ve been driving the winding ridge roads of unincorporated Greenburgh for over four decades. Victor Salinas founded Ironworks Gate Co. in 1984, and our technicians know the difference between a gate on flat ground in Hartsdale and one battling slope creep on a wooded hillside off Broadway in the Irvington corridor. That local terrain knowledge saves our customers time and money.
Our response time to Greenburgh is typically same-day or next-morning. We keep common parts for FAAC, BFT, Linear, and Viking systems on our trucks, so we don’t make two trips.
Greenburgh homeowners leave reviews mentioning the same things: we show up when we say we will, we explain the repair before starting, and we stand behind it. The 90-Day Done Right Promise - our written Keystone Standard - applies to every weld, every hinge, every post we set. No paperwork to file. No argument. If it’s not right, we come back and make it right.
Every technician is background-checked and uniformed. We work in your home the way we’d work in our own mother’s.
Our Gate Parts & Welding Services in Greenburgh
Hinge Replacement
Original hinges on Greenburgh’s older estate gates - particularly the wrought-iron swing gates on stone pillars in and around Irvington - were never designed for forty years of Hudson Valley freeze-thaw. We see the same failure pattern every spring: cast-iron or early steel hinges cracked at the knuckle, or the weld between hinge leaf and gate frame has crystallized from decades of stress. A typical hinge replacement in Greenburgh runs $220-$380 for standard residential gates, $450-$650 for heavy ornamental iron requiring custom fabrication to match period hardware. We source or forge replacements that fit the existing prep holes so your stone pillars stay intact.
Post Replacement
This is where Greenburgh’s geography gets personal. On sloped driveways throughout unincorporated Greenburgh, gate posts installed without deep, below-frost footings routinely rack or sag downhill over two to three winters. It’s a failure pattern our technicians encounter repeatedly here that rarely shows up with the same frequency in the flatter parts of Westchester to the north. NY code requires 42-inch footings, but older installations often cheated that depth. Post replacement in Greenburgh typically costs $480-$890 including proper excavation, concrete, and alignment. For hillside lots, we weld custom hinge brackets at non-standard angles to compensate for grade and frost heave - a repair rarely needed in flatter suburbs.
Rail Repair
Bent, cracked, or rusted gate rails are common on the black aluminum driveway gates found in newer Greenburgh construction, and on the lower rails of older wrought-iron estate gates where snowplows, delivery trucks, or decades of ground moisture have taken their toll. Rail repair in Greenburgh generally runs $180-$340 for aluminum welding and straightening, $290-$520 for steel or iron rail fabrication and welding. We match existing profiles so the repair disappears visually.
Custom Welding
Our mobile welding rig handles field repairs that would otherwise require removing the entire gate. Last spring, we replaced a rusted-out FAAC swing-gate opener on a sloped driveway off Broadway in the Irvington corridor. The original underground conduit had cracked from frost heave, so we welded in new rigid conduit and retrofitted a heavy-duty LiftMaster slide gate operator with a custom bracket angled to match the 10% grade. Custom welding in Greenburgh starts at $240 for simple bracket fabrication and ranges to $680+ for complex motorized hinge assemblies on historic gates. We are trained and equipped on nine gate-automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - so the correct fix is made on the first visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greenburgh
We stock parts and maintain certification on nine major automation brands. For Greenburgh customers, that means no waiting for a special order when your Viking operator fails during a January thaw, or when your Linear access panel quits before a holiday weekend. We carry FAAC and BFT hydraulic components, Linear slide-gate hardware, and Viking control boards on our service trucks. Most brand-specific repairs in Greenburgh are completed in one visit. If your gate motor is obsolete, we’ll tell you honestly and quote a retrofit with upfront pricing - no surprises on the bill.
Common Gate Parts & Welding Problems We See in Greenburgh Homes
- Gate posts destabilized by frost heave on hillside lots. The Hudson Valley freeze-thaw cycle hits Greenburgh with 15-25 thaw events most winters, heaving posts out of plumb and cracking concrete footings. We reset posts with proper 42-inch depth and welded anti-rack bracing for sloped terrain.
- Original 1920s wrought-iron hardware weakened at welds. Irvington estate gates frequently require hinge re-welding where decades of freeze-thaw stress have crystallized original joints. We match period-appropriate bead patterns and metal grades.
- Underground conduit cracked from soil movement on wooded slopes. Spring moisture and frost heave destroy PVC conduit runs for automated openers, causing intermittent motor failure or complete dead gates. We weld in rigid metal conduit rated for Greenburgh’s soil conditions.
- Surface rust accelerating on untreated hardware. Hudson Valley rain and snowmelt, heavier than in drier inland suburbs, rusts wrought-iron and untreated steel hardware faster than homeowners expect. We clean, weld repair, and apply protective finishes suited to this climate.
Pricing for Gate Parts & Welding in Greenburgh, NY
Here is what gate parts and welding work actually costs in the Greenburgh market. These are the ranges we quote before any work begins.
| Service | Typical Range in Greenburgh |
|---|---|
| Hinge replacement (standard residential) | $220 - $380 |
| Hinge replacement (ornamental/estate iron) | $450 - $650 |
| Post replacement with proper footing | $480 - $890 |
| Rail repair (aluminum) | $180 - $340 |
| Rail repair (steel/iron) | $290 - $520 |
| Custom welding / bracket fabrication | $240 - $680+ |
| Seasonal tune-up | $89 |
Factors that move costs within these ranges: gate material and weight, accessibility on sloped lots, whether original hardware must be matched for historic properties, and the depth of footing required for post work. We offer $50 off any repair over $250, a free second opinion on any written estimate from another company, and a permanent 5% senior and veteran discount. Every estimate is free. Call (833) 754-7503 for exact pricing on your specific gate.
We Also Serve Cities Near Greenburgh
Our service radius covers the full Hudson Valley corridor west of the Bronx River Parkway. We regularly complete Gate Parts & Welding in Greenburgh and the surrounding communities of Irvington, Dobbs Ferry, Hartsdale, and Hastings-on-Hudson. The same technician who knows your Irvington estate gate likely serviced a similar installation in Dobbs Ferry last week. That cross-town experience matters when you’re dealing with period hardware or slope-specific failures.
Serving Greenburgh, NY - Our Local Coverage Area
We’re based in the Greenburgh area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Greenburgh
Yes. We fabricate and weld replacement hinges that match the original bead pattern, metal thickness, and mounting geometry of early 20th-century wrought-iron estate gates. Our mobile welding rig allows us to repair the hinge in place without removing the gate from historic stone pillars. Typical cost for period-appropriate hinge re-welding or replacement in Irvington runs $340-$580. Call (833) 754-7503 for a free estimate - we’ll photograph the existing hinge and quote exact matching.
The fix is a new post set to 42-inch below-frost depth with a custom-welded hinge bracket angled to your specific grade, plus anti-rack bracing if soil movement is active. This is the most common structural failure we see in Greenburgh’s unincorporated hillside areas. Standard post replacement with custom welding runs $480-$890. Call (833) 754-7503 - we’ll measure the slope and quote upfront before any excavation.
It depends on which side of the jurisdictional line your property falls. Greenburgh’s patchwork of incorporated villages nested within unincorporated town territory means gate replacement or automation upgrades may require a town permit on one block and a village permit two streets over. We know the boundary lines and can advise which authority has jurisdiction when we see your address. Permit research is included in our free estimate. Call (833) 754-7503 with your street address and we’ll confirm the requirement.
Viking parts remain available for most models from the 2000s, and we stock common Viking control boards and gear assemblies on our Greenburgh service truck. If your specific motor is obsolete, we’ll quote a retrofit with a current-production operator - often a Linear or LiftMaster unit - with custom welding to adapt the new motor to your existing gate geometry. Motor replacement or retrofit in Greenburgh typically runs $680-$1,240 depending on gate weight and access. Call (833) 754-7503 for same-day diagnosis.
Usually not. Jamming rollers typically indicate bent track, debris buildup, or worn bearings rather than a weld failure. We clean, inspect, and replace roller assemblies as needed - typical roller service in Greenburgh runs $140-$280. If the roller mounting bracket has cracked from impact or corrosion, then yes, we weld or replace the bracket. Call (833) 754-7503 and we’ll diagnose whether it’s a roller replacement or a welding repair.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Greenburgh since 1984.