Fast, Reliable Gate Parts & Welding Across Benbrook
Gate parts and welding repair in Benbrook typically runs $180-$650 depending on whether you need a hinge swap, post reset, or full custom fabrication. Most jobs finish in one visit, and we’re usually on-site in Benbrook within the same day you call. Ring us at (833) 754-7503 - a live person answers, 24 hours a day.
We’ve been working in Benbrook long enough to know the difference between a standard suburban privacy gate off I-20 and the heavy pipe-rail paddock gates on the larger lots near the lake. The housing stock here tells a story: brick ranch homes built from the 1970s through the 1990s, many still running their original wrought-iron side gates and early automatic operators that are now well past their expected service life. That history matters when we’re choosing between a repair and a full retrofit. Our Gate Parts & Welding team carries the inventory and welding equipment to handle both worlds - the light residential hardware and the agricultural-grade gates found on equestrian properties along the lake’s western and southern shores.
Why Ironworks Gate Co. Is Benbrook’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has served Texas homeowners for over 42 years, and we’ve built a steady reputation in Benbrook by showing up when we say we will and fixing gates so they stay fixed. Our technicians are background-checked, uniformed, and trained on nine automation brands - Linear, Viking, Ghost Controls, DoorKing, and others - so the correct part goes in on the first trip.
Benbrook customers call us back because we give an upfront price before turning a single bolt, and we protect every job with our written 90-Day Done Right Promise. No paperwork to file. No argument. If something isn’t right, we come back and make it right.
Response time to Benbrook is typically same-day or next-morning, depending on when you call. We know the local roads - Winscott, Benbrook Boulevard, the ranch-residential corridors near the lake - so we don’t waste time getting lost or showing up unprepared.
That local knowledge runs deep. We understand how Tarrant County’s black shrink-swell clay shifts gate posts out of plumb between wet winters and dry summers, and we know which lake-adjacent properties are running orphaned 1980s operators that no distributor stocks anymore. That expertise saves Benbrook homeowners from paying for parts hunts that end in dead ends.
Our Gate Parts & Welding Services in Benbrook
Hinge Replacement
Original wrought-iron side gates on 1970s and 1980s Benbrook homes often wear their hinges paper-thin after thirty to fifty years of opening and closing. We replace ferrous hinges with galvanized or stainless hardware rated for the gate’s actual weight, not what someone guessed in 1984. On lake-adjacent properties, we specify corrosion-resistant hinges because Benbrook’s elevated ambient moisture from the reservoir accelerates rust faster than you’ll see in drier Fort Worth suburbs inland.
Post Replacement
This is one of our most called-for services in Benbrook, and for good reason. The shrink-swell clay throughout Tarrant County heaves gate posts out of plumb season after season, especially on older properties with 1970s-1990s foundations that weren’t engineered for today’s soil-movement standards. A post that looks straight in May can be two inches off by October. We set replacement posts in concrete footings deep enough to resist that cycle, and we realign the gate and operator to match. For automated gates, we also recalibrate limit switches so the motor doesn’t overtravel and burn out.
Rail Repair
Pipe-rail paddock gates on Benbrook’s equestrian properties take abuse that suburban privacy gates never see - horses push, rub, and occasionally spook into them. We repair bent or broken rails by cutting out the damaged section and welding in matching stock, then grinding and finishing so the repair doesn’t become a snag point. For chain-link paddock gates near the lake, we address the same corrosion issues that attack hinges, replacing tension bars and stretcher bars where rust has weakened the frame.
Custom Welding
Our welding rig travels to Benbrook jobsites for repairs that can’t be unbolted and carried to a shop. We fabricate custom brackets to retrofit modern operators onto original masonry pillars, rebuild gate corners where rust has eaten through the frame, and weld new latch receivers when the old strike plate no longer aligns. On a 1980s ranch estate along Winscott Road, the underground actuator on a heavy double-swing gate seized from a failed limit switch. We traced the fault to an orphaned FAAC 400 board - no parts available - and refitted a new Ghost Controls unit to the existing brick pillars, welding custom brackets to bypass the original mounts. That kind of problem-solving is standard for us, not exceptional.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
We stock and service parts for Linear, Viking, Ghost Controls, and DoorKing operators, plus we carry common hinge, latch, and roller hardware for legacy gates that never had a brand name. For Benbrook customers with orphaned 1980s systems - the discontinued FAAC swing-arms and underground actuators common near the lake - we don’t waste your time hunting parts that no longer exist. We retrofit modern operators to your existing pillars and frames, welding whatever brackets or adapters the job demands. Most brand-specific repairs in Benbrook finish in a single visit because our trucks carry the inventory.
Common Gate Parts & Welding Problems We See in Benbrook Homes
- Clay-heaved posts misaligning gates and operators. Tarrant County’s black shrink-swell clay shifts gate posts out of plumb year after year, throwing off latch strikes and causing auto-operator limit switches to fault. We see this repeatedly on older Benbrook properties with original 1970s-1990s footings.
- Rust-accelerated hinge and frame failure near the lake. Benbrook’s proximity to the reservoir creates slightly higher ambient moisture than inland Fort Worth suburbs, speeding corrosion on ferrous hinges, drop rods, and gate frames. Original 30-to-50-year-old wrought-iron side gates are especially vulnerable.
- Orphaned 1980s operators with no replacement parts. On Winscott Road properties and other lake-adjacent estates, premium underground actuator and swing-arm installs from the 1980s are now unsupported. Replacement parts were discontinued over a decade ago, forcing retrofit or complete rebuild.
- Worn latches and locks on aging side gates. The bulk of Benbrook’s housing stock dates from the 1970s through the 1990s, and many original wrought-iron or chain-link side gates still run their factory latches. After decades of use, the strike plates wallow out and the bolts loosen in masonry that has itself shifted.
Pricing for Gate Parts & Welding in Benbrook, TX
Here’s what typical gate parts and welding work costs in the Benbrook market:
- Hinge replacement (single gate): $180-$280
- Latch and lock replacement: $150-$260
- Post reset or replacement: $350-$650
- Rail repair (welded section): $220-$400
- Custom welding and bracket fabrication: $200-$450
- Operator retrofit to existing pillars: $850-$1,800
Actual cost depends on gate size, material, and whether we can reuse existing masonry or need to rebuild. We settle on an upfront price before starting work - no surprises on the bill. Active offers for Benbrook customers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (833) 754-7503 for a free estimate.
We Also Serve Cities Near Benbrook
Our service area extends to Benbrook and the surrounding communities - White Settlement to the northeast, Crowley to the south, Fort Worth proper to the east, and River Oaks to the north. If you’re on the edge of Benbrook city limits or in an unincorporated pocket near the lake, call us and we’ll confirm coverage. Same-day response, same upfront pricing.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Benbrook
No. FAAC discontinued replacement parts for those 1980s swing-arm and underground actuator models over a decade ago. We retrofit modern operators - Ghost Controls, Linear, or another compatible brand - to your existing brick or stone pillars, welding custom brackets where needed. Call (833) 754-7503 for a free assessment and exact quote.
Tarrant County’s expansive black clay soil swells when wet and shrinks when dry, shifting your gate post or pillar fractionally each season. After years of this cycle, the mortar or anchor bolts loosen and the hinge no longer seats solidly. We remove the old fasteners, repack or re-anchor the pillar, and install heavier-duty hinges with expansion-rated hardware. The fix lasts longer when you address the soil movement, not just the symptom.
Yes. We cut off the corroded or worn latch, grind the area clean, and weld a new receiver or slide-bolt assembly matched to the gate’s profile. For 1970s wrought iron in Benbrook, we typically see wallowed strike plates and frozen slide bolts from decades of rust. We finish with a rust-inhibiting primer on ferrous metal. Call for an estimate - most latch replacements run $150-$260.
Possibly, but check the post first. On Benbrook lake-adjacent properties, clay soil movement often shifts the gate post enough to change the open and close positions, which makes the operator appear to lose its limits. If the post is plumb and the limits still drift, the control board may be failing - common on 20-to-30-year-old operators. We diagnose on-site and quote repair or replacement before proceeding.
Yes. We repair and weld chain-link paddock gates on the larger ranch-residential properties near the lake’s western and southern shores, replacing tension bars, stretcher bars, and bent frame members. We also install or repair latches and drop rods suited to horse traffic. Same-day service is usually available. Call (833) 754-7503 to schedule.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook since 1984.