Fast, Reliable Gate Motor & Opener Across Benbrook
Gate motor and opener repair in Benbrook typically costs $180-$650 depending on whether we’re fixing a standard suburban unit or retrofitting an orphaned 1980s system, and most calls are completed same-day. We’re Ironworks Gate Co., and we’ve been the company Benbrook homeowners call when a gate that worked fine for thirty years suddenly quits. From the brick ranch homes off Interstate 20 to the horse properties along Winscott Road near the lake, we know the local hardware, the local soil, and the local headaches. Call (833) 754-7503 - a live person answers, 24 hours a day, 7 days a week.
Benbrook’s housing stock tells a story. Most of these homes went up between the 1970s and 1990s, and many still run original gate operators installed when the neighborhood was new. That 1988 FAAC underground actuator. That 1994 Linear swing-arm. They were premium installs at the time. Now they’re orphaned - parts discontinued, wiring rotted from Tarrant County clay moisture, motors grinding against gates that have sagged on shifted posts. We see it constantly. Our Gate Motor & Opener team carries the tools, the brands, and the patience to sort out whether a repair is worth doing or if it’s time to retrofit something modern to your existing pillars.
Why Ironworks Gate Co. Is Benbrook’s Preferred Gate Motor & Opener Company
We’ve worked in Benbrook long enough to know which houses on which streets have the old underground actuators. That matters. A technician who has to diagnose your problem from scratch costs you time and money. We show up knowing what we’re likely facing.
Our customers in Benbrook - from the established neighborhoods near Benbrook Lake to the ranch properties off Winscott Road - tell us they chose us because we answer the phone. No voicemail tree. No callback queue on a Saturday evening when your gate won’t close and you’re leaving town. A live person, every time.
Our 90-Day Done Right Promise, the Keystone Standard, applies to every job in Benbrook. Written guarantee. No paperwork to file. No arguing. If it’s not right, we come back and make it right. That’s been our way for over 42 years, since 1984.
We also offer a $50 discount on any repair over $250, a free second opinion on any written estimate, and a standing 5% Senior and Veteran discount. Our $89 Seasonal Tune-Up catches problems before they strand you.
Our Gate Motor & Opener Services in Benbrook
Motor Installation
New motor installation in Benbrook runs $850-$2,400 for most residential properties, with estate-grade slide motors for heavy agricultural gates reaching $3,200-$4,800. We install across the full range of Benbrook’s housing types: standard suburban swing gates in the 76132 neighborhoods, heavier wrought-iron privacy gates on quarter-acre lots, and the substantial pipe-rail or ornamental iron gates on horse properties near the lake. Every install starts with a free, upfront estimate settled before we turn a bolt. No surprises on the bill.
Motor Repair
Most motor repairs in Benbrook fall between $180 and $480. The chronic issue here is Tarrant County’s black shrink-swell clay. It heaves in wet winters, contracts in dry summers, and slowly pulls gate posts out of plumb. That misalignment causes limit switches to trip prematurely, which burns out relays and overworks motors. We see this repeatedly on the sprawling ranch lots where a gate post shift of even half an inch can cause an operator to think it’s hit an obstruction. We fix the motor, then we check the post. Done right means it stays fixed.
Linear Motor Service
Linear operators are common in Benbrook’s 1990s-era installations - reliable units, but now twenty to thirty years old. We service and replace Linear motors, including the classic swing-arm and slide-gate models. Where parts are still available, we repair. Where they’re orphaned, we retrofit a current Linear or compatible unit to your existing mount. We stock Linear components locally for Benbrook customers, so most jobs finish in one visit.
Slide Motor Installation & Repair
Heavy pipe-rail gates on Benbrook’s equestrian properties often exceed what a swing-arm operator can handle. The original installer may have undersized the motor, or years of gate sag have increased the load. We install slide motors - rack-and-pinion or chain-drive - rated for the actual weight of your gate. Typical slide motor work in Benbrook runs $1,200-$3,800 depending on gate weight, track condition, and whether we need to pour a new concrete pad. For the heaviest agricultural gates, we spec Viking or DoorKing commercial-grade units with battery backup.
Intercom Integration
Many Benbrook homeowners want their gate motor tied to an intercom or keypad system, especially on larger lake-area properties where the gate sits far from the house. We integrate voice and video intercoms with new or existing operators, running low-voltage cable where needed or configuring wireless links where trenching isn’t practical.
Battery Backup
Benbrook’s position near the lake means slightly elevated ambient moisture compared to drier Fort Worth suburbs, and that moisture finds its way into underground wiring and control boxes. A battery backup ensures your gate opens during power outages - increasingly important for homeowners with medical needs or frequent travel. Battery backup add-on or replacement runs $280-$520 installed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
We’re trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Benbrook’s mix of legacy and modern installations, that breadth matters. The 1980s FAAC underground actuator on a Winscott Road horse property needs a different approach than a 2019 Ghost Controls solar swing operator on a lake-view cottage. We stock parts locally for the brands we see most in Tarrant County - Linear, Viking, Ghost Controls, and DoorKing - which keeps turnaround short and lets us complete most Benbrook jobs in a single visit.
Common Gate Motor & Opener Problems We See in Benbrook Homes
- Limit switch drift from clay soil heave. Tarrant County’s expansive black clay shifts gate posts seasonally, throwing off the precise alignment that limit switches need. The motor thinks it’s hitting an obstruction and reverses, or it over-travels and stresses the gearbox. We realign the gate, reset the limits, and check the post footing.
- Orphaned 1980s underground actuators with no replacement parts. On Winscott Road and along the lake’s western shore, premium underground actuator installs from the 1980s are now unserviceable. We recently serviced a 1988 FAAC swing-arm operator on a Winscott Road equestrian property where the old actuator had seized from dried-out seals - no parts available, so we retrofitted a modern LiftMaster swing gate opener to the existing limestone pillars, a job we do often in Benbrook’s older lake estates.
- Age-rotted wiring losing continuity. Underground moisture near Benbrook Lake corrodes low-voltage wiring runs, causing intermittent or total failure. The motor receives no signal, or it receives a partial signal that confuses the control board. We trace, replace, and seal.
- Heavy gates exceeding original operator torque ratings. Pipe-rail and wrought-iron gates on horse properties are heavier than the original installer may have calculated. Years of operation strip gears, overheat motors, and crack actuator housings. We upgrade to properly rated slide motors or heavy-duty swing operators.
Pricing for Gate Motor & Opener in Benbrook, TX
| Service | Typical Range in Benbrook |
|---|---|
| Standard motor repair (limit switch, relay, wiring) | $180 - $340 |
| Control board or logic module replacement | $320 - $580 |
| New swing motor installation (standard residential) | $850 - $1,800 |
| Heavy-duty slide motor installation | $1,200 - $3,800 |
| Estate-grade slide motor (agricultural gate) | $3,200 - $4,800 |
| Battery backup add-on or replacement | $280 - $520 |
| Seasonal tune-up | $89 |
What moves a job toward the higher end: retrofitting orphaned 1980s hardware to existing brick or stone pillars, pouring new concrete pads for slide motor track, running new low-voltage cable across large properties, or upgrading from an undersized motor to a heavier-duty unit. We settle the full price before starting work. Our $50 off any repair over $250 and free second opinion on any written estimate apply to every Benbrook call. Call (833) 754-7503 for an exact quote - estimates are free.
We Also Serve Cities Near Benbrook
Our shop dispatches regularly to Benbrook and the surrounding communities: White Settlement to the north, Crowley to the south, Fort Worth proper to the east, and River Oaks to the northeast. Same live-answer phone, same 90-Day Done Right Promise, same upfront pricing.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Benbrook
In most cases, no. The parts for 1980s underground actuators were discontinued years ago, and we cannot source seals, gears, or control modules for FAAC, Elite, or early DoorKing units of that era. We retrofit a modern operator to your existing brick or stone pillars, which we do regularly on Winscott Road and the lake’s western shore. Call (833) 754-7503 - we’ll assess the pillars and give you a firm retrofit price at no charge.
Tarrant County’s black shrink-swell clay absorbs water and expands, pushing your gate post out of plumb. When the clay dries, it contracts and leaves the post shifted. That half-inch of movement is enough to throw off limit switch alignment. We fix the motor, then we address the post footing or add adjustable hardware to compensate for seasonal movement. This is a chronic repeat-service driver in Benbrook’s ranch lots.
Yes. We install Viking and DoorKing commercial-grade slide motors rated for agricultural gates well over 1,000 pounds, with battery backup available. Most Benbrook horse properties need a slide motor retrofit because the original swing-arm operator was undersized for the gate’s actual weight. Typical cost is $1,200-$3,800 depending on track condition and whether we need new concrete work.
If the motor runs smoothly and the control board accepts programming, a new receiver or remote kit ($180-$320) often solves it. If the board won’t enter learn mode, or if the motor itself is noisy, overheating, or slow, replacement makes more sense. We give free estimates in Benbrook, and our second-opinion offer applies if you’ve already gotten a quote elsewhere.
Yes. We work regularly on the lake-adjacent properties off Winscott Road and the western shore, where elevated moisture accelerates rust and rots underground wiring. We spec corrosion-resistant hardware and seal connections against the damp. Same-day service is usually available. Call (833) 754-7503.
We’re the company that makes a 40-year-old gate close like the day it was hung. If your operator is failing, misaligned, or simply past its time, we’ll tell you straight whether it needs repair or replacement, settle the price before we start, and stand behind the work with our written 90-Day Done Right Promise. Call Ironworks Gate Co. at (833) 754-7503 for your free estimate in Benbrook.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook and Tarrant County since 1984.