Gate Parts & Welding in Aloha, OR - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Parts & Welding Across Aloha

Gate parts and welding repair in Aloha, OR typically costs $180-$650 depending on the scope, and most hinge, post, and rail jobs are completed same-day. Ironworks Gate Co. has been answering calls from Aloha homeowners since 1984, and we know the difference between a quick afternoon fix and a job that needs Washington County permitting sorted first. Our shop is stocked with steel hinge brackets, gate rollers, and latch hardware sized for the 6-foot cedar privacy gates that dominate Aloha’s 1970s-1990s neighborhoods, and our welding rigs are built to squeeze into tight driveways off SW 185th and the Oak Hills cul-de-sacs where maneuvering space is scarce. Call (833) 754-7503 - a live person answers, day or night.

Call (833) 754-7503

Why Ironworks Gate Co. Is Aloha’s Preferred Gate Parts & Welding Company

Aloha is not Beaverton, and it is not Portland. It is unincorporated Washington County, and that distinction matters when a gate replacement needs permitting. We have watched too many homeowners get sent in circles - calling Beaverton’s building department, being told their parcel is county jurisdiction, then starting over with Washington County Land Use & Transportation. We file that paperwork correctly from the start.

Our Aloha customers tend to be longtime homeowners, many twenty-plus years in the same ranch or split-level on standard lots near SW Farmington Road or in the neighborhoods backing up to Cooper Mountain. They remember the contractor who showed up late or vanished mid-job. We do not do that. A live person answers our phone 24 hours a day, 7 days a week - no voicemail, no callback queue, no waiting until Monday morning.

Most of our Aloha calls are completed in a single visit. We carry nine gate-automation brands on our trucks - including Linear, Viking, and Ghost Controls - and our technicians are background-checked, uniformed, and working by the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. Every job is protected by our written 90-Day Done Right Promise, the Keystone Standard. No paperwork to file. No argument. If it is not right, we come back and make it right.

Our Gate Parts & Welding Services in Aloha

Hinge Replacement

The hinges on Aloha’s original cedar gates were never meant to last forty years. We regularly find 5/8-inch lag bolts rusted solid into sodden 4×4 posts, or steel T-hinges bent paper-thin from decades of opening and closing. A typical hinge replacement in Aloha runs $180-$320 for standard residential hardware, including removal of the old bolts, drilling fresh pilot holes into sound wood or sistering a steel post bracket when the timber is too far gone. For gates on sloped driveways near SW 170th or the Bethany-adjacent streets where grade changes stress the bottom hinge, we often upgrade to adjustable J-bolt hinges with grease fittings - hardware that costs more upfront but outlasts two replacements of the standard stuff.

Post Replacement

Post replacement is the most common major gate repair we do in Aloha, and it is almost always caused by the same thing: Tualatin Valley rain. The area’s 37-40 inches of annual precipitation, concentrated in months-long wet seasons, turns cedar and pressure-treated 4x4s into sponge. By the time a homeowner notices the gate dragging, the post has often rotted below grade. We dig out the old post, pour a concrete footing rated for Washington County’s expansive clay soils, and set a new pressure-treated or steel post with proper drainage. A standard 4×4 post replacement in Aloha is $380-$550; a steel post with welded hinge brackets runs $520-$780. We handle the Washington County permit if the replacement affects a boundary fence over 6 feet - one less thing for the homeowner to chase.

Rail Repair

Aloha’s periodic ice storms hit harder than the higher-elevation west-side neighborhoods. The freeze-thaw load on a 30-year-old cedar top rail, already checked and dried from summer heat, splits it clean through. For wood rail repair, we scarf in new cedar stock, bolt with galvanized hardware, and seal the end grain - $240-$400 depending on length. When a hollow-tube steel frame has bent, we cut out the damaged section and weld in schedule-40 steel tubing, then prime and paint to match. That welding repair typically runs $320-$480. We have done this work on gates along SW Tualatin Valley Highway corridor properties and in the older Oak Hills tracts where the original metal gates are now brittle with age.

Custom Welding

Our welding shop fabricates steel hinge brackets, gate frames, and latch receivers that off-the-shelf hardware cannot accommodate. Aloha’s tight clearances - shared driveways, alley-loaded townhomes, carports converted to gate bays - often require us to build custom. We replaced a rusted-out LiftMaster swing gate opener and welded a new steel hinge bracket for a townhome on SW Larcam Loop in the Oak Hills area. The client’s original wood gate had rotted at the post owing to decades of Tualatin Valley rain, and the tight alley clearance required us to maneuver a welding rig into a shared driveway without blocking neighbor access. Custom welding in Aloha starts at $280 for a simple bracket and runs to $650 for a full frame section, with most jobs falling in the $340-$480 range.

Trusted Brands We Service in Aloha

We stock parts and provide certified service for nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Aloha customers, this means we do not order parts and make you wait - we diagnose on the first visit, replace with what we carry, and test before we leave. Linear and Viking operators are common in the Aloha townhome complexes near SW Murray Boulevard; Ghost Controls solar setups appear on the larger lots toward the Cooper Mountain edge where grid power to the gate is a long trench away. We carry control boards, limit switches, and safety loops for all three, plus the welding hardware to remount them when rot or ice damage has shifted the gate geometry.

Common Gate Parts & Welding Problems We See in Aloha Homes

• Rotting wood gates from decades of Tualatin Valley rain cause hinge bolts to pull loose from sodden posts. The 40-inch annual rainfall does not let up for months, and by the time the gate sags, the post heart is punky halfway up. We see this on nearly every street in Aloha’s 1970s-1980s tracts.
• Misrouted permitting when homeowners assume they are in Beaverton and proceed without Washington County approval, leading to stop-work orders. The border runs right through Aloha, and the confusion is nearly universal. We file with the correct department from day one.
• Ice-storm damage to lightweight hollow-tube metal gate frames, which bend under freeze-thaw loads in low-elevation valley neighborhoods. The 2021 ice storm destroyed dozens of Aloha gates we later repaired or replaced, many with frames that had been marginal for years.
• Failed gate rollers and track on sliding gates in the tighter lots near SW 185th and the Oak Hills area, where accumulated leaf debris and valley moisture corrode the bearing races and flat-spot the wheels. A roller replacement is $140-$220; track welding repair runs $260-$380.

Pricing for Gate Parts & Welding in Aloha, OR

We Also Serve Cities Near Aloha

Our Gate Parts & Welding team covers the full west-side Portland metro, including Rockcreek, Bethany, Cedar Mill, and Oak Hills. We also serve homeowners throughout Aloha and its surrounding unincorporated Washington County neighborhoods. Same-day response, same written guarantee.

FAQs - Gate Parts & Welding in Aloha