Fast, Reliable Gate Installation Across Aloha
Gate installation in Aloha typically runs $2,800-$6,500 for a complete residential system, with most projects permitted through Washington County and completed within one to two weeks. Our crew covers the full 97003 ZIP from the Farmington Road corridor north to the Rockcreek border, and we carry the full line of Viking, Ghost Controls, and DoorKing automation hardware on our trucks.
We’ve been driving these Aloha streets since 1984. We know the tight alley approaches off Park Way, the 1970s ranch lots with their original cedar privacy fences, and the county permitting path that out-of-area contractors routinely mishandle. When you call (833) 754-7503, a live person answers - 24 hours a day, 7 days a week - and we’ll have a technician to your Aloha home, usually same day or next.
Why Ironworks Gate Co. Is Aloha’s Preferred Gate Installation Company
Aloha homeowners remember the last contractor who let them down. We’re still here forty-two years later because we don’t.
Our reputation in Aloha is built on getting the county paperwork right the first time. Washington County’s Land Use & Transportation department handles permits here, not Beaverton - a distinction that stops projects cold when missed. We’ve guided hundreds of Aloha homeowners through that process. They remember.
Response time to Aloha averages under 45 minutes from dispatch during business hours. Our trucks stage from the west side of the metro area, and we know which cut-throughs save time during the evening rush on TV Highway.
Victor Salinas has owned Ironworks Gate Co. since its founding. His name is on every 90-Day Done Right Promise we write. In Aloha, that promise travels by word of mouth from neighbor to neighbor.
Our Gate Installation Services in Aloha
Security Gate Installation
Aloha’s unincorporated status means no municipal police force of its own - homeowners here think about access control more carefully than many Portland suburbs. We install security gates with rolling-code remotes, keypad entry, and telephone entry systems that integrate with existing home automation. Our Gate Installation team specs steel-framed gates with anti-climb features for the alley-load properties near Farmington Road where visibility is limited and space is tight.

Swing Gate Installation
The classic wood swing gate still dominates Aloha’s 1970s-1990s neighborhoods, and for good reason - it fits the standard suburban lot without requiring the setback a slide gate demands. We fabricate and install single and double swing gates in steel, aluminum, and wood-clad steel, always accounting for the Tualatin Valley’s wet-season soil saturation that causes post heave. Every swing gate we install in Aloha includes hardware rated for the Pacific Northwest’s freeze-thaw cycle.

Sliding Gate Installation
Sliding gates solve the clearance problem on Aloha’s tighter lots and alley-loaded driveways. We replaced a failing wood swing gate on a 1980s tract home near Farmington Road that had rotted at the hinge posts from decades of Tualatin Valley rain. We installed a LiftMaster LA40 slide gate opener with rolling-code remotes, which gave the homeowner security without needing to modify the tight alley approach. Our slide gates run on sealed V-groove or cantilever systems - no exposed track to clog with the fir needles and maple samaras that blanket Aloha each fall.

Pedestrian Gate Installation
Many Aloha homes have side-yard pedestrian gates that see more daily use than the driveway gate. We match these to existing fence lines, install self-closing hinges and pool-code latches where required by Washington County, and spec materials that won’t rot out in five years. A pedestrian gate done right is the one you stop noticing - it just works, season after season.

Double Gate & Estate Gate Installation
For larger Aloha properties near the Rockcreek boundary or on oversized lots off 209th, we fabricate custom double-leaf estate gates with automated openers and intercom systems. These projects require the same Washington County permitting we handle on every job, plus coordination with HOA guidelines where Rockcreek’s covenants apply.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aloha
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Aloha’s security-focused homeowners, we frequently recommend Viking and DoorKing for their rolling-code encryption and telephone-entry compatibility, and Ghost Controls for solar-ready swing gate applications where trenching power to a rear alley is impractical. We stock local parts for all nine brands, so most repairs and automation upgrades happen in a single visit - no waiting on freight from out of state.
Common Gate Installation Problems We See in Aloha Homes
- Permit confusion with Beaverton. Homeowners in Aloha frequently call the City of Beaverton about fence and gate permits - Beaverton’s border runs right through the area - only to be told the parcel is unincorporated Washington County, sending them back to square one. We file with Washington County’s Land Use & Transportation department from the start, so your project never stalls.
- Wet-climate wood rot on aging cedar gates. The Tualatin Valley floor where Aloha sits receives roughly 37-40 inches of rain annually with months-long wet seasons that accelerate wood rot and oxidize uncoated steel hardware on aging gates. We see hinge posts rotted through on thirty-year-old cedar gates in the Farmington Road corridor every week.
- Ice storm damage to lightweight metal frames. The valley’s low elevation makes it susceptible to the periodic Portland-metro ice storms, whose sudden freeze-thaw loads split weathered wood rails and bend lightweight hollow-tube metal frames more severely than higher-elevation west-side neighborhoods. We replace these with steel tube or aluminum extrusion rated for the load.
- Post heave in saturated soils. Aloha’s flat valley floor holds water through the winter wet season. Gate posts set without proper drainage rock and depth heave and lean by spring. We dig to 36-inch minimum depth, use concrete with proper slope for runoff, and never shortcut this step.
Pricing for Gate Installation in Aloha, OR
A typical swing gate installation in Aloha runs $2,800-$4,200, including steel or aluminum frame, hardware, and basic automation. Sliding gate systems start around $4,500 and range to $6,500 for full automation with keypad and safety loops. Security gates with intercom and telephone entry typically fall between $5,500 and $8,000, depending on access trenching and power run requirements.
What moves the number: gate size and material, automation brand and features, whether new posts are needed, and the extent of electrical work for the opener. Every Aloha job gets a written, itemized estimate before we turn a bolt. No surprises on the bill.
Current standing offers: $50 off any repair over $250, free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (833) 754-7503 for a free estimate at your Aloha home.
We Also Serve Cities Near Aloha
Our crews work throughout Washington County and the west metro, including Aloha neighbors in Rockcreek, Bethany, Cedar Mill, and Oak Hills. The same Washington County permitting expertise, the same 90-Day Done Right Promise, the same live answer on every call.
Serving Aloha, OR - Our Local Coverage Area
We’re based in the Aloha area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Aloha
Yes, gate installation in Aloha requires a permit from Washington County Land Use & Transportation, not the City of Beaverton. Because Aloha is unincorporated, many homeowners and even some contractors mistakenly apply in Beaverton and have to restart the process. We file the correct permit paperwork with Washington County on every job, so your project moves forward without delay. Call (833) 754-7503 and we’ll confirm your parcel’s jurisdiction during the free estimate visit.
We can replace posts alone, though we typically recommend evaluating the full gate frame at the same time. In Aloha’s climate, rot at the posts often means the rails and pickets are within a few years of failure too. We dig to 36-inch depth, set in drained concrete, and match the new posts to your existing fence line. Call (833) 754-7503 for an exact quote - estimates are free.
We can install a sliding gate or a swing gate with a side-mount opener that requires minimal interior clearance. For the tightest alley approaches near Park Way, we often spec a cantilever slide gate that needs no interior track run at all. We’ll measure your approach during the free estimate and show you the clearances each option requires. Call (833) 754-7503 to schedule.
Lightweight hollow-tube frames often bend beyond repair in Portland-metro ice storms, but steel tube or aluminum extrusion frames can sometimes be straightened or section-replaced. We inspect the frame geometry and weld quality on site and give you a straight answer - repair if it makes sense, replace if it doesn’t. Either way, we spec material rated for the Tualatin Valley’s freeze-thaw loads. Call (833) 754-7503 for a free second opinion on any written estimate.
For Aloha’s security-focused homeowners, we typically recommend Viking for heavy-duty slide and swing automation with rolling-code encryption, DoorKing for telephone-entry and multi-tenant compatibility, and Ghost Controls for solar-ready swing applications where running power is difficult. All three integrate with modern access control and carry the automation expertise we back with our 90-Day Done Right Promise. Call (833) 754-7503 - we’ll match the right brand to your gate type and security needs.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Aloha since 1984.