Fast, Reliable Gate Motor & Opener Across Broadview Park
Gate motor and opener repair in Broadview Park typically costs $180-$520 depending on whether it’s a control board reset, a full operator replacement, or post-realignment work. Most calls in the 33317 ZIP code are completed same day, and our Gate Motor & Opener team carries the parts to finish the job in one visit. Call (833) 754-7503 and a live person will answer, 24 hours a day.
We’ve been working in Broadview Park long enough to know the pattern. A homeowner on NW 46th Avenue or along the canal streets near Plantation walks out to find the gate won’t open, or opens six inches and quits. The motor hums. Nothing moves. Or worse, the gate sags on its post and the operator strains until the thermal overload trips. These aren’t new gates failing. They’re original 1960s and 1970s ornamental iron installations that have outlived every component twice over. We understand the concrete-block construction, the shallow footings, the salt air that works its way into every limit switch. Broadview Park isn’t a place for generic fixes.
Why Ironworks Gate Co. Is Broadview Park’s Preferred Gate Motor & Opener Company
Ironworks Gate Co. has served South Florida for over 42 years, and Broadview Park’s unincorporated character has made it a regular destination for our technicians. We know the difference between a Plantation-permitted job and one that falls under Broward County Building Division rules, and we make sure the work is done to the correct standard the first time.
Our customers in Broadview Park tell us they chose us because we showed up when we said we would, explained the problem in plain language, and left a written 90-Day Done Right Promise without being asked. That reputation travels by word of mouth on streets like NW 62nd Terrace and NW 50th Street, where neighbors compare notes on contractors.
Response time to Broadview Park averages under 90 minutes during business hours, and our 24/7 live phone support means you’re never waiting for a callback queue. A real person answers, takes the details, and dispatches a background-checked, uniformed technician who arrives with the tools and parts to fix nine major brands on-site.
The local knowledge matters. We know which homes in Broadview Park sit on the lower-lying lots near the C-11 canal, where groundwater and salt-laden humidity accelerate corrosion. We know the 1950s-1970s CBS ranches with their original hollow-block fence pillars and embedded iron posts. And we know the county code requirements that a handyman from Fort Lauderdale might miss entirely.
Our Gate Motor & Opener Services in Broadview Park
Slide Motor Repair & Replacement
Slide motors take the most punishment in Broadview Park. Legacy 8-foot slide gates on shallow footings drag and bind after rainy season ground settlement, drawing excess current that burns out control boards. We’ve replaced dozens of BFT and Viking slide operators on NW 46th Avenue and surrounding streets where the gate had been forcing the motor to work harder every cycle until it failed completely. A typical slide motor replacement in Broadview Park runs $420-$780, including operator, mounting hardware, and alignment. If the post footing has heaved, we re-pour it. No point in hanging a new motor on a crooked gate.
Motor Repair & Control Board Service
Not every failed motor needs replacement. Sometimes it’s a $180 control board reset, a new capacitor, or a limit-switch adjustment. In Broadview Park’s older housing stock, we regularly see original FAAC linear operators that have simply lost their programming after a power surge, or Viking units with corroded limit-switch contacts from salt-laden canal humidity. The gate stops in mid-travel. Reverses unpredictably. These are repairable problems if caught early. Motor repair in Broadview Park typically ranges $180-$340. We diagnose before we quote, and we don’t replace what we can fix.
Linear Motor Installation for Swing Gates
Linear motors, or articulated arm operators, suit the ornamental iron swing gates common on Broadview Park’s mid-century ranches. But here’s the local catch: original 1960s FAAC linear operators on non-reinforced hollow-block posts fail when the post cracks at the anchor bolts, twisting the motor mount out of alignment. We’ve seen this on homes near NW 50th Street. The motor itself is fine. The post is disintegrating. A proper linear motor installation in Broadview Park includes assessing the post structure, and if needed, pouring a new steel-sleeved footer before the operator ever gets mounted. Typical linear motor installation: $520-$890.
Battery Backup Systems
Broward County’s wind-load requirements and the reality of Florida hurricane season make battery backup non-negotiable for new installations. We install dry-contact battery backup systems that keep your gate operational during outages and satisfy county code for properties that need secure closure before a storm. On that 1966 CBS ranch on NW 62nd Terrace, we replaced a seized LiftMaster LA400 slide operator and installed a new battery backup system to meet county wind-load requirements. The old concrete footing had heaved 2 inches, misaligning the rack and pinion; we re-poured the post footer and got everything square. Battery backup installation typically adds $280-$450 to a motor replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broadview Park
We carry parts and complete technical training for nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Broadview Park homeowners, this means we don’t order parts and make you wait. Our trucks stock FAAC control boards, Viking limit-switch assemblies, and Linear actuator kits specific to the models we encounter most in Broward County’s older housing stock. A BFT control board replacement or Viking slide-operator repair happens same day, not next week. We will be there when we say.
Common Gate Motor & Opener Problems We See in Broadview Park Homes
- Post failure at grade level. The original 1960s-70s iron gate posts were often embedded directly in hollow-block fence pillars without a steel pipe sleeve. Years of moisture wicking through the block rot the buried post section at grade. The gate looks fine until the hinge side snaps at ground level when opened. Full post replacement, not a hinge repair.
- Corroded limit switches from canal humidity. Salt-laden humidity from nearby canals corrodes limit-switch contacts inside exposed Viking slide operators. The gate stops in mid-travel or reverses unpredictably. The motor isn’t dead. The switches are. We clean or replace them, and we seal the housing better than it was.
- Ground settlement after rainy season. Legacy 8-foot slide gates on shallow footings drag and bind after June-October ground saturation. The motor draws excess current trying to move a misaligned gate until the control board burns out. We fix the alignment first, then replace the board.
- County code compliance gaps. Broadview Park’s unincorporated status means gate-opener electrical work involving a service disconnect must pass Broward County’s 2023 Building Code, requiring a separate 20-amp dedicated circuit. Homeowners used to municipal exemptions in neighboring Plantation get caught off-guard. We handle the permitting correctly.
Pricing for Gate Motor & Opener in Broadview Park, FL
| Service | Typical Range in Broadview Park |
|---|---|
| Control board reset / programming | $180-$260 |
| Motor repair (capacitor, limit switch, wiring) | $180-$340 |
| Linear motor installation (swing gate) | $520-$890 |
| Slide motor replacement | $420-$780 |
| Battery backup system add-on | $280-$450 |
| Post replacement / footing repair | $340-$620 |
What moves the price? Three things: whether the existing post and footing are sound, whether the electrical supply meets county code for a dedicated 20-amp circuit, and whether we’re repairing or fully replacing an operator. We settle the full price before turning a single bolt. No surprises on the bill. And with our $50 Off Any Repair Over $250, plus the permanent 5% Senior and Veteran discount, the final number is fair and upfront. Call (833) 754-7503 for a free estimate.
We Also Serve Cities Near Broadview Park
Our technicians cover Broadview Park and the surrounding Broward County communities daily, including Plantation, Fort Lauderdale, Lauderhill, and Lauderdale Lakes. The same 90-Day Done Right Promise, the same live-answer phone support, and the same expertise with Broward County building codes apply across every city we serve.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Broadview Park
Yes, if the electrical work involves a service disconnect or new dedicated circuit, Broward County Building Division requires a permit because Broadview Park is unincorporated. Neighboring Plantation has different municipal rules, but they don’t apply here. We handle the permitting as part of the job. Call (833) 754-7503 to confirm what your specific replacement requires.
Ground saturation shifts shallow footings, misaligning the gate and causing the motor to bind or overload. Water also wicks into hollow-block posts, accelerating corrosion at the buried post section. In Broadview Park’s June-October rainy season, we see this pattern constantly on original 1960s-70s installations. The fix is realignment and post stabilization, not just another motor. Call (833) 754-7503 for an inspection.
Only if the pad and post are still square and structurally sound. Most original pads in Broadview Park have heaved or cracked after decades of moisture cycles. We measure first. If the pad is good, a new FAAC or compatible operator mounts cleanly. If not, we pour new footings before installing anything. A free estimate tells you which path applies.
No, but it’s common. The combination of Broadview Park’s heat, humidity, and frequent short-cycling from misaligned gates kills batteries prematurely. A properly installed battery backup with correct charging parameters and a gate that moves freely should last 3-5 years. We check the whole system, not just swap the battery. Our $89 Seasonal Tune-Up catches these issues before they strand you.
Post corrosion at grade level. The original iron posts were set directly in hollow-block pillars without steel sleeves. Decades of South Florida ground moisture rot the buried section until it snaps under load. The motor fails because it’s trying to move a gate attached to a broken post. We see this on NW 62nd Terrace, NW 46th Avenue, and throughout the neighborhood. The repair is post replacement, then motor service or replacement. Call (833) 754-7503 for a free estimate.
Ready to get your gate working right? Call Ironworks Gate Co. at (833) 754-7503 for a free estimate. A live person answers 24 hours a day, 7 days a week. We’ll be there when we say, we’ll quote the full price upfront, and we’ll stand behind the work with our written 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Broadview Park and Broward County since 1984.