Fast, Reliable Gate Installation Across Broadview Park
Gate installation in Broadview Park typically runs $2,800-$6,500 for a complete driveway system with automation, and most projects are completed in one to two days. Our crews are familiar with the tight lot lines and alley-load configurations common throughout this unincorporated Broward County enclave, and we carry the county wind-load hardware that city-licensed contractors often do not stock. If you’re ready to replace a sagging original gate or add security to a 1960s CBS ranch, call us at (833) 754-7503. We’ll answer live, 24 hours a day, and schedule a free, no-pressure estimate at your Broadview Park home.
We’ve been serving South Florida for over 42 years, and Broadview Park’s particular mix of aging housing stock and county-level permitting is familiar territory. The original ornamental iron gates and chain-link enclosures on these mid-century homes weren’t built for decades of humidity and salt air. When they fail, they tend to fail suddenly - a hinge post snaps at grade, an operator burns out from binding, or a gate tears free in a storm. We handle the full scope: new gate fabrication, post replacement with proper steel sleeves, automation on nine major brands, and county-compliant wind-load installation.
Why Ironworks Gate Co. Is Broadview Park’s Preferred Gate Installation Company
Broadview Park homeowners know the difference between a contractor who understands unincorporated Broward County rules and one who shows up with city-of-Plantation assumptions. We’ve installed gates along Johnson Street, near the Lauderdale Lakes border, and throughout the 33317 zip code. Our technicians know to check whether a property falls under Broward County Building Division jurisdiction before pulling any permit paperwork.
Our customers in Broadview Park leave reviews mentioning the same things: we arrive when we say we will, we explain the county code requirements in plain English, and we leave the job with a written 90-Day Done Right Promise - the Keystone Standard - in hand. No voicemail trees. No callback queues. A live person answers every call, every hour of every day.
Most Broadview Park calls reach a technician within 24 hours. Many installations are completed same-week. We don’t subcontract gate work to generalist crews. Our background-checked, uniformed technicians carry welding rigs, concrete boring equipment, and automation inventory for brands including FAAC, BFT, and Linear - so the correct fix happens on the first visit.
Our Gate Installation Services in Broadview Park
Swing Gate Installation
Swing gates remain the most common replacement we install in Broadview Park, matching the original design of 1960s and 1970s homes. The challenge here is almost always the footing. Shallow concrete pads from the original construction have heaved with decades of ground moisture, causing gates to bind against the ground or strain their operators. We excavate to proper depth, pour new footings with rebar ties where county wind-load rules require them, and set steel-sleeved posts that won’t rot at grade. A typical single swing gate with basic automation in Broadview Park runs $2,800-$4,200.
Sliding Gate Installation
Sliding gates solve the clearance problem on Broadview Park’s tighter lots, where a swing gate would encroach on alley access or a neighbor’s property line. We install cantilever and track-mounted systems, spec’ing operators with enough torque to handle the wind resistance that builds during afternoon thunderstorms. For narrow alley-load driveways common near the Plantation border, a sliding gate often makes more sense than a double swing. Complete sliding gate installations with automation typically fall between $4,500-$6,500 in this market.
Security Gate Installation
Broadview Park’s location - bordered by major thoroughfares and with a mix of owner-occupied and rental properties - means security is a practical concern, not an afterthought. We install steel-framed security gates with welded pickets, anti-climb toppings where requested, and access control integration: keypads, telephone entry systems, and rolling-code remotes that resist code-grabbing. Every security gate we install in Broward County meets the wind-load requirements for tropical storm conditions. Pricing starts around $3,200 for a manual security gate and ranges to $5,800+ with full automation and access control.
Pedestrian Gate Installation
Side-yard pedestrian gates on Broadview Park’s small lots take more abuse than people realize - they’re the daily entry point, they slam shut in wind, and their latches corrode fastest because they’re handled most. We match existing ornamental iron styles or fabricate new aluminum gates with powder-coated finishes that resist the humidity and UV that destroy paint on ferrous metal within five to seven years. A standalone pedestrian gate installation typically runs $800-$1,800.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broadview Park
We stock and service automation from nine manufacturers, including FAAC, BFT, Linear, and Viking - brands we see most often in South Florida’s existing gate installations. For Broadview Park customers, this means we rarely need to order parts and wait. Our trucks carry FAAC hydraulic operators for heavy iron gates, BFT electromechanical units for residential swing applications, and Linear slide operators for tight-clearance sliding systems. When we specify a new installation, we match the brand and model to your gate’s weight, cycle frequency, and exposure to wind and rain. The right operator on day one prevents the service call three years later.
Common Gate Installation Problems We See in Broadview Park Homes
- Hidden post rot in hollow block pillars. The original 1960s-70s iron gate posts in Broadview Park were often embedded directly in hollow-block fence pillars with no steel pipe sleeve. Moisture wicks through the block, rotting the buried post section at grade. The gate looks fine until the hinge side snaps clean off when someone opens it. We see this failure pattern regularly near Johnson Street and throughout the 33317 area.
- Heaved footings causing binding and operator failure. Shallow concrete footings from original construction have shifted with decades of South Florida ground moisture. Swing gates drag, operators overwork, and motors burn out prematurely. The fix is never just adjusting the gate - it’s resetting the post on a proper footing.
- Accelerated corrosion of ferrous hardware. Broward County’s humidity, UV exposure, and six-month rainy season destroy unprotected hinges, latches, and operator mounting brackets within 8-12 years. We specify stainless or galvanized hardware on every new installation, and we upgrade existing gates with corrosion-resistant components when we can.
- Wind-load code gaps from city-assuming contractors. Because Broadview Park is unincorporated, county wind-load rules apply - not Plantation’s, not Fort Lauderdale’s. Contractors unfamiliar with this distinction sometimes install gates that won’t pass inspection or, worse, won’t hold in a tropical storm. We pull the correct permit and install to the correct standard every time.
Pricing for Gate Installation in Broadview Park, FL
| Service | Typical Range in Broadview Park |
|---|---|
| Single swing gate with manual operation | $2,200 - $3,400 |
| Single swing gate with automation | $2,800 - $4,200 |
| Double swing gate with automation | $3,800 - $5,500 |
| Sliding gate with automation | $4,500 - $6,500 |
| Security gate with access control | $3,200 - $5,800+ |
| Pedestrian gate (manual) | $800 - $1,800 |
| Post replacement with steel sleeve and footing | $900 - $1,600 per post |
These ranges reflect what we charge Broadview Park homeowners for standard installations with no surprises. Final cost depends on gate size, material (aluminum vs. steel vs. ornamental iron), automation brand and features, and whether post replacement or footing work is needed. We settle on an upfront price before any work begins. Estimates are free. Call (833) 754-7503 to schedule.
Standing offers for Broadview Park customers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Broadview Park
Our crews work throughout central Broward County, including Broadview Park and neighboring Plantation, Fort Lauderdale, Lauderhill, and Lauderdale Lakes. The same county wind-load expertise, the same live-answer phone support, and the same written 90-Day Done Right Promise apply whether we’re installing a gate off Johnson Street or along a canal in Plantation. If you’re unsure whether your property falls under city or county jurisdiction, we’ll confirm it during your estimate and pull the correct permit.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Broadview Park
Yes, if the gate is new or involves substantial structural work, a permit from the Broward County Building Division is required because Broadview Park is unincorporated county land, not a city. Many homeowners and even some contractors mistakenly apply city-of-Plantation or city-of-Fort-Lauderdale rules, which causes delays and rework. We handle the county permit application as part of our installation process. Call (833) 754-7503 and we’ll confirm what your specific project requires.
No, welding a leaning post in a hollow block pillar is a temporary fix that ignores the root cause: moisture-wicking corrosion at the buried section. We’ve replaced dozens of these in Broadview Park, including a sagging double driveway gate on a 1960s CBS ranch on Johnson Street where the hinge post had rotted inside a hollow block pillar. We installed a steel sleeve with a new LiftMaster slide operator and tied the footer to rebar per county wind-load specs. The proper repair is post replacement with a steel sleeve and new concrete footing. We can assess this during a free estimate.
Linear and FAAC slide operators are our go-to recommendations for Broadview Park’s tighter alley-load configurations, where a swing gate would lack clearance. Linear’s compact residential slide units fit narrow spaces without sacrificing torque for wind resistance. FAAC’s hydraulic operators handle heavier gates smoothly. We stock both and can demonstrate cycle speed and noise levels during your estimate. Call (833) 754-7503 to discuss your specific driveway layout.
Every gate we install in unincorporated Broward County is engineered to the county’s wind-load standards for tropical storm conditions, with proper post depth, rebar ties in footings, and hardware rated for the calculated wind pressure. We document this on the permit drawings and during inspection. This is not optional, and it is not the same standard that applies in incorporated cities. Our Gate Installation team has completed hundreds of county-compliant installations - we know the difference and we build to it.
We can often reuse existing posts if they are structurally sound, but in Broadview Park we find that original 1960s-70s posts are frequently compromised by hidden rot at grade. We inspect with a probe and visual check below the surface line. If the post is solid, we fabricate a new gate to match your style and hinge it to the existing hardware. If the post is rotted or the footing has heaved, replacement is the only repair that will last. We’ll show you exactly what we find and give you an upfront price for either scenario. Call (833) 754-7503 for a free assessment.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Broadview Park and Broward County since 1984.