Gate Repair in Fort Worth, TX
A gate that will not close in Fort Worth is more than a nuisance. It is an open invitation to any vehicle that pulls in, and in neighborhoods from Arlington Heights to the Stockyards corridor, that is not a situation to leave until morning. Gate repair in Fort Worth typically runs $180 to $650 depending on the problem, and most repairs are completed in a single visit with the price settled before we start. Call (833) 754-7503 any time. A live person answers, 24 hours a day.
Why Fort Worth Homes Are Different
Fort Worth sits on Houston Black clay. This is the expansive Blackland Prairie soil that swells several inches with spring rain and shrinks into deep cracks during the summer droughts that define North Texas. That seasonal movement rocks gate posts out of plumb, stresses hinge welds, and shears anchor bolts within a few years of installation. A gate that closed smoothly in April may drag and bind by August, and the problem is the soil, not the gate. The housing stock adds a second layer. In 76107, 76109, and 76110, thousands of homes built from the 1940s through the 1960s still carry their original ornamental wrought iron gates. After 60 to 80 years, welds fatigue, hinges seize with rust worked into structural corrosion, and the iron needs a skilled hand, not a handyman.
Gate Repair in Fort Worth
Gate repair in Fort Worth means working on two very different animals in the same week. One day we are welding a cracked scroll on a 1950s ornamental iron driveway gate in Fairmount. The next day we are replacing heavy-duty hinge stock on a 20-foot welded pipe cattle gate near the Stockyards. Most Fort Worth gate repairs run $180 to $650, and we carry welders, hinge stock, and automation parts on the truck so the job gets done in one visit. Our full Gate Repair service covers the range.
Weld Repair
Weld repair is the backbone of what we do in Fort Worth. The core ZIPs, 76107, 76109, and 76110, are full of mid-century homes whose original wrought iron gates are now 60 to 80 years old. The original welds were single-pass and never meant to carry 300 pounds for eight decades. We cut out the cracked metal, burn in structural gussets, and restore the original geometry. A single on-site weld repair in Fort Worth typically runs $220 to $380.
Post Repair
Post repair in Fort Worth is not just resetting a post. It is understanding what Houston Black clay does below grade. The soil swells with spring rain, then shrinks and cracks in summer drought. That cycle rocks posts out of plumb and shears anchor bolts on concrete footings. We use longer embedment depths and wider footings engineered to resist the heave. Post resetting or replacement in Fort Worth generally costs $340 to $650.
Gate Realignment
A gate that drags, binds, or will not latch is usually out of alignment. In Fort Worth, it often starts with post heave and compounds as hinges wear and frames twist. We measure the gate against its original swing plane, adjust or replace hinges, and reset the catch. For automated gates, we recalibrate the operator’s limit switches so the motor is not fighting the frame. Most realignments in Fort Worth run $220 to $380 and are done in one visit.
Why do my Fort Worth gate posts keep leaning after a few years?
Your gate posts lean because Fort Worth’s Houston Black clay swells with spring rain and shrinks during summer drought, rocking the post and shearing anchor bolts. We repair this by resetting posts with deeper embedment, wider footings, and sometimes helical piers in the most active clay zones. Call (833) 754-7503 for a free inspection and an exact quote.
Gate Installation in Fort Worth
Gate installation in Fort Worth typically runs $2,800 to $7,500 for most residential projects. The two things that drive every install here are the clay soil and the architectural review boards. We set posts 42 inches deep minimum with reinforced footings so Houston Black clay does not heave them out of plumb, and we verify ARB requirements before we fabricate anything. Our Gate Installation service handles the full scope, from matching a 1950s iron pattern to standing up a new ranch gate.
Swing Gate Installation
Swing gates remain the most common install in Fort Worth’s established neighborhoods. Arlington Heights, Westcliff, and Fairmount are full of them. Many homeowners want the original character preserved, so we fabricate matching sections rather than swap in a generic panel. A single swing driveway gate with operator in Fort Worth typically runs $4,500 to $7,500.
Heavy Ranch Gate Installation
For properties near the Stockyards corridor and the outer residential belts, a 20-foot welded pipe cattle gate needs a different approach than a suburban ornamental gate. We pour deeper footings, use larger-diameter hinges, and spec operators rated for agricultural cycle counts. Heavy ranch gate installation in Fort Worth runs $7,500 to $14,000 depending on length and operator load.
Does Houston Black clay really affect a new gate installation in Fort Worth?
Yes. It is the single biggest cause of premature gate failure in this market. Standard 24-inch footings tilt and bind within two years. We set posts 42 inches deep minimum with reinforced concrete, and we use helical piers on sites with chronic movement. A gate installed to standard depth will sag. Call (833) 754-7503 to discuss your specific site.
Gate Motor & Opener in Fort Worth
A gate motor repair or opener replacement in Fort Worth typically costs $380 to $1,850 depending on the gate type and motor size, and most jobs are completed in one visit. We carry the heavy-duty inventory most residential gate companies do not stock: FAAC slide motors, Viking swing operators, and battery backup systems for the ranch properties and aging iron gates that define this city. Our Gate Motor & Opener service covers repair, replacement, and new installs.
Motor Repair
Gate motor repair in Fort Worth typically runs $280 to $680. We see burned-out capacitors from summer heat overload, stripped gearboxes from motors fighting misaligned gates, and control boards fried by hail strikes or power surges. Most repairs are completed same-day because we stock common boards, gears, and limit switches for nine brands, including FAAC and BFT.
Motor Installation
We size the operator to the gate weight and cycle frequency, not to what is on the truck. A 600-pound ornamental iron gate in Arlington Heights gets a different motor than a 1,500-pound welded pipe ranch gate near the Stockyards. Standard motor installation in Fort Worth runs $680 to $1,200, and heavy-duty installs for ranch or estate gates run $1,200 to $2,400.
Why do gate motors in Fort Worth need battery backup?
North Texas spring storms and occasional ice events knock out power across Tarrant County, sometimes for days. Without battery backup, a heavy gate becomes a manual lift or a lockout. We install battery backup on new motors and retrofit most existing operators, especially on rural properties. Call (833) 754-7503 for a quote.
Gate Access Control in Fort Worth
Gate access control in Fort Worth typically runs $340 to $1,200 for residential keypad, intercom, or smart entry systems. The condition of existing wiring and whether the gate post is plumb decide most of the final price. We work on systems hung on original mid-century iron in Fairmount and on modern smart controllers retrofitted to estates in Westcliff. Our Gate Access Control service covers keypads, video intercoms, and phone entry.
Keypad Entry Systems
Keypad entry remains the workhorse for Fort Worth homes. In 76110, we regularly see legacy keypads mounted on rusted gate pillars where the conduit has corroded. We run new weather-rated conduit and mount the keypad to survive another forty years. A new residential keypad system in Fort Worth typically runs $340 to $580 installed.
Video Intercom Systems
Video intercoms are what Fort Worth homeowners add when they want to see who is at the gate without walking the driveway. For rusted iron pillars, we fabricate custom mounting brackets that do not drill into original scrollwork. A video intercom retrofit in Fort Worth generally costs $680 to $1,150 depending on pillar condition and wiring path.
Can you add a smart access system to an old wrought iron gate without damaging the original ironwork?
Yes. We fabricate custom mounting brackets that clamp to existing structure without drilling into original scrollwork or finials. On a Fairmount job, we mounted a smart controller using existing hinge bolt points so the homeowner kept the original craftsmanship and gained phone-based entry. Call (833) 754-7503 to have your gate inspected.
Gate Parts & Welding in Fort Worth
Gate parts and welding in Fort Worth typically costs $180 to $650, and most jobs are completed in a single visit. In the same morning, our technicians might weld a matching replacement scroll for an HOA-bound gate in Ridglea and then fabricate a heavy-duty pipe-rail hinge for a horse property off the outer belt. Our Gate Parts & Welding service handles the full range, from ornamental iron to welded pipe.
Custom Welding
HOA architectural review boards in Ridglea, Arlington Heights, and Westcliff require repaired gates to match original designs, colors, and scrollwork patterns. We weld custom pickets, scrolls, and finials to match existing ornamental iron so the repair passes review the first time. A typical custom welding job in Fort Worth runs $280 to $550.
Post Replacement
Post replacement is our most frequent repeat-service call in Fort Worth, and the reason is almost always the soil. We pull the old post, excavate to stable depth, and pour a reinforced footing that accounts for seasonal clay movement. Post replacement in Fort Worth generally runs $450 to $650, with deeper footings and anti-heave measures included.
My Fort Worth HOA requires gates to match a specific design. Can you weld matching pieces?
Yes. We weld custom pickets, scrolls, and finials to match your existing ornamental iron, then finish with color-matched powder coat. This satisfies the architectural review boards in Ridglea, Arlington Heights, and other Fort Worth neighborhoods with design codes. Call (833) 754-7503 to describe what you need.
Brands We Service in Fort Worth
We are trained and equipped on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our Fort Worth trucks carry FAAC, BFT, and Linear components for same-day repair on most models. See our brands for the full list of what we service.
Pricing for Gate Repair in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| Hinge repair or replacement | $180 - $290 |
| Weld repair (single crack, on-site) | $220 - $380 |
| Gate realignment | $220 - $380 |
| Post reset or replacement | $340 - $650 |
| Rust treatment and repainting | $280 - $450 |
| Automated operator diagnostics and repair | $260 - $520 |
| Standard motor installation (residential) | $680 - $1,200 |
| Custom welding (ornamental or structural) | $280 - $550 |
What pushes the price toward the higher end in Fort Worth: deeper footings for Houston Black clay, custom fabrication to match HOA-required designs, and automated gates that need operator realignment after post work. Whatever the number, we settle the full price before we turn a single bolt. No surprises on the bill.
Neighborhoods We Serve in Fort Worth
Most Fort Worth calls see a technician the same day. We work the full range of the city’s housing and property types.
- Arlington Heights / Ridglea (76107)
- Westcliff / Tanglewood (76109)
- Fairmount / Mistletoe Heights (76110)
- Northside / Stockyards corridor (76106)
- Outer residential belts of Tarrant County
Service Area - Cities Near Fort Worth
Ironworks Gate Co. serves Fort Worth, TX and the surrounding communities across Tarrant County. Our crews also cover River Oaks, TX, Forest Hill, TX, Haltom City, TX, Benbrook, TX, and White Settlement, TX. Dispatch is coordinated from our Dallas-Fort Worth office, with crews stationed to serve Fort Worth locally.
Serving Fort Worth, TX - Our Local Coverage Area
Ironworks Gate Co. crews serve Fort Worth and the communities around it; dispatch is coordinated from our Dallas-Fort Worth office. The map shows the Fort Worth coverage area; if your address is on it, we can help.
Also serving nearby: Fort Worth, TX, River Oaks, TX, Forest Hill, TX, Haltom City, TX, Benbrook, TX, White Settlement, TX.
FAQs About Gate Repair in Fort Worth
In most cases, yes. Most Fort Worth gate repairs are completed in a single visit, and a live person answers the phone 24 hours a day, seven days a week. If the repair can be done safely on the first trip, we do it then. Call (833) 754-7503 and describe what is happening.
For a repair that matches the existing gate, usually not. For a full replacement or any change to style, color, or material, yes. Neighborhoods like Fairmount, Mistletoe Heights, and Ridglea Hills have active architectural review boards. We verify requirements before fabricating anything, so the work passes on the first submission.
Call (833) 754-7503 for a free estimate on any gate repair, installation, or opener work in Fort Worth. The price is settled before work begins, and every job is protected by the 90-Day Done Right Promise, in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."
- Ruben Morales"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson