Fast, Reliable Gate Repair Across Converse
Gate repair in Converse, TX typically runs $180-$520 depending on the problem, and most jobs are completed same-day when you call before noon. If your gate is sagging, grinding, or won’t latch, the cause is usually deeper than the hinges - especially in Converse’s older subdivisions where clay soil and decades of deferred maintenance have taken their toll.
We know Converse well. Our crew rolls out to the 78109 zip code daily, from the established streets of Shadow Creek to the tidy blocks near Judson High School and the homes tucked along FM 78. We’ve been the company that makes a 40-year-old gate close like the day it was hung, and we bring that same standard to every repair in Converse. When a gate won’t open at 6 a.m. or you’re staring at a tilted post after the last spring storm, a live person answers our phone - every hour, every day - at (833) 754-7503. No voicemail. No callback queue.
Why Ironworks Gate Co. Is Converse’s Preferred Gate Repair Company
We’ve been serving Texas homeowners for over 42 years, since 1984, and we’ve learned that Converse presents a specific set of challenges you don’t see in every market. The military community tied to nearby Joint Base San Antonio-Randolph means frequent tenant turnover and gates that accumulate problems across multiple PCS cycles. We’ve earned the trust of longtime Converse residents and property managers alike by fixing the root cause, not just the symptom.
Our response time to Converse averages under 90 minutes during business hours, and we schedule true emergency calls the same day. Every technician who arrives at your driveway is background-checked, uniformed, and trained on nine gate-automation brands - so the correct part is on the truck and the correct fix happens on the first visit.
Our customers in Converse mention the same things in their feedback: we show up when we say we will, we explain the problem in plain language, and we settle on an upfront price before touching a single bolt. That is the Keystone Standard, and it applies to every job. Plus, every repair is backed by our written 90-Day Done Right Promise - if it’s not right, we come back and make it right. No paperwork. No arguing.
Our Gate Repair Services in Converse
Post Repair
This is the repair we perform most often in Converse, and for good reason. The heavy black expansive clay soils beneath Converse homes - Vertisol soils common to northeastern Bexar County - swell with spring rains and shrink hard during summer drought. That wet-dry cycle heaves gate posts seasonally, tilting them out of plumb and throwing the entire gate out of alignment. A technician working Converse quickly learns that surface-level hinge tightening is almost always a callback waiting to happen. The clay movement re-torques posts within one seasonal cycle. The permanent fix requires pulling the post, deepening the concrete footing past the active shrink-swell layer, and resetting plumb - a standard that the original 1990s tract builders rarely followed. We recently fixed a sagging LiftMaster-operated gate on Crestway Drive in the Shadow Creek subdivision - the post had tilted two inches after spring rains. We pulled the old concrete, dug past the shrink-swell layer, reset the post plumb, and replaced the rusted hinge brackets; the gate now swings freely even through the summer drought.
Gate Realignment
When a gate drags across the driveway, sticks at the latch, or requires a shoulder to close, realignment is needed. In Converse, we see this constantly in the 1990s-2000s subdivisions where original wood gates have warped through twenty-plus Texas heat cycles while their metal posts have shifted in the clay. Realignment starts with diagnosing whether the problem is the gate frame, the post, or both. We measure the opening, check for square, and adjust or replace hardware as needed. If the post has heaved, we include post stabilization in the scope so you’re not calling again next spring.
Hinge Repair
Hinges on Converse gates take abuse. The original hardware from 1990s tract construction was rarely galvanized to handle our humidity, and rust sets in deep. Military rental properties are especially prone to this - deferred maintenance across multiple tenant cycles leaves hinges frozen, cracked, or pulling out of rotted wood frames. We replace with heavy-duty, corrosion-resistant hinges sized to the gate weight, and we always check the post attachment. A new hinge bolted to a tilted post will fail again. Done right - and backed in writing.
Weld Repair
Metal gates and ornamental ironwork around Converse develop cracks at stress points: where the frame meets the pickets, at latch plates, and along gate-wheel mounts. Our mobile welding rig lets us repair these fractures on-site, matching the original weld profile and grinding clean for paint. For estate gates and custom fabrications, this saves the cost and delay of full replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Converse
Our trucks carry parts and diagnostic tools for FAAC, BFT, Linear, and Viking automation systems, plus five additional major brands. That inventory matters in Converse because a gate that won’t open is often a gate-opener problem, not a mechanical one. Whether your driveway runs a LiftMaster slide gate on FM 78 or a Ghost Controls swing system near Rolling Meadows, we arrive equipped to test, identify, and repair on the spot. Most Converse customers never need a second visit.
Common Gate Repair Problems We See in Converse Homes
- Rusted, misaligned hinges from deferred maintenance. Military rental turnover near Randolph Air Force Base means gates often pass through multiple tenants without basic lubrication or adjustment. By the time we’re called, the hinge pins are frozen and the mounting plates have wallowed out the wood.
- Original 1990s wood frames warping and splitting. The near-universal wood privacy gates in Converse subdivisions have dried, absorbed moisture, and dried again through two decades of Texas heat. The frames twist. The gate binds against the post or drags the ground.
- Clay soil heave tilting posts after every rainy season. Converse’s black Vertisol clay expands and contracts with moisture changes. Posts set to 1990s depth standards - often just 18 inches - ride that movement and tilt. Simple hinge tightening cannot compensate for a post that has moved two inches.
- Automation failures on aging openers. Gate motors installed during the 2000s building boom are reaching end-of-life. Circuit boards fail. Safety sensors misalign. We stock replacement components for nine brands to restore function without a full system replacement.
Pricing for Gate Repair in Converse, TX
We believe in a square deal: upfront price, no surprises on the bill. Here is what gate repair typically costs in the Converse market:
| Service | Typical Range in Converse |
|---|---|
| Hinge repair / replacement (2-3 hinges) | $180 - $280 |
| Post reset with below-grade footing | $320 - $520 |
| Gate realignment (frame and hardware) | $220 - $380 |
| Mobile weld repair (crack/frame) | $200 - $340 |
| Opener diagnostic and repair | $180 - $420 |
| $89 Seasonal Tune-Up | $89 (fixed) |
Factors that move the needle: gate size and weight, accessibility for our welding rig, whether the post requires full replacement versus reset, and automation complexity. We inspect, diagnose, and quote before any work begins. Estimates are free. Call (833) 754-7503 for your exact quote - and remember, repairs over $250 qualify for $50 off, seniors and veterans save 5% automatically, and we always provide a free second opinion on any written estimate you’ve received elsewhere.
We Also Serve Cities Near Converse
Our service radius covers the full northeast Bexar County corridor. We regularly repair gates in Windcrest, Universal City, Kirby, and Live Oak - many of which share the same clay-soil conditions and 1990s housing stock as Converse. If you’re searching for Gate Repair in Converse or anywhere nearby, our Gate Repair team covers your area with the same response standard and written guarantee.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Converse
The sagging returns because the post beneath the hinges is moving. Converse’s heavy black clay soil swells when wet and shrinks when dry, tilting posts that were not set deep enough by the original builder. We fix this by pulling the post, pouring a new footing below the active shrink-swell zone - typically 36 inches or more - and resetting everything plumb. That eliminates the callback. Call (833) 754-7503 and we’ll diagnose whether your post has heaved; estimates are free.
Yes, we regularly service rental homes and duplexes near Joint Base San Antonio-Randolph, working directly with property managers or tenants who have owner authorization. We understand PCS timelines and can coordinate access, documentation, and billing to meet military housing requirements. Same-day scheduling is available when the gate is inoperable. Call (833) 754-7503 to arrange service.
Often yes, if the frame is not rotted through. Converse’s original subdivision gates are now hitting the 20-30 year mark simultaneously, and many have solid cores beneath weathered surfaces. We replace warped boards, reinforce split rails, install new hardware, and treat rust. When the frame itself has failed, we’ll tell you honestly and quote replacement. We never sell a repair that won’t last. Call (833) 754-7503 for an inspection.
Severely. The spring rain and summer drought pattern in Converse produces the widest soil movement in Texas, and that movement re-torques posts, cracks welds, and stresses automation mounts. We factor this into every repair - using deeper footings, flexible hardware where appropriate, and corrosion-resistant materials rated for our humidity. A repair that ignores Converse’s clay is a repair you’ll need again in six months. Call (833) 754-7503 to schedule work that lasts.
We are trained and equipped on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our Converse service trucks stock common failure parts for FAAC, BFT, Linear, and Viking systems, which allows same-day repair for most automation problems. If your opener is discontinued, we’ll advise honestly on repair versus replacement options. Call (833) 754-7503 with your model number.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Converse and surrounding communities since 1984.