Fast, Reliable Gate Parts & Welding Across Richland Hills
Gate parts and welding repair in Richland Hills typically runs $180-$650 depending on whether you’re looking at hinge work, post replacement, or custom fabrication, and our crew can usually be on-site the same day you call. We know the 76180 ZIP well - from the ranch homes along Handley-Ederville Road to the cottage-style places near Boulevard 26 - and we understand that a gate that won’t latch or a post that’s shifted in the clay isn’t just an annoyance when you’re trying to back out of a narrow driveway.
We’ve been serving Richland Hills and the broader mid-cities for over 42 years. Our Gate Parts & Welding team carries hinges, rollers, latch hardware, and welding equipment on every truck, so most repairs finish in a single visit. Call (833) 754-7503 and a live person will answer - 24 hours a day, seven days a week - no voicemail, no callback queue.
Why Ironworks Gate Co. Is Richland Hills’s Preferred Gate Parts & Welding Company
Richland Hills homeowners remember the last contractor who didn’t show or who left a mess. We don’t give them reason to add us to that list. Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
We have built our reputation in this market by being the company that makes a 40-year-old gate close like the day it was hung. Our 90-Day Done Right Promise - the Keystone Standard - is written, not spoken. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Response time to Richland Hills is typically under 90 minutes during business hours, and our emergency line puts you straight to a live person who can dispatch a crew. We know the local streets, the alley configurations, and the particular headache of trying to back a truck into a 1950s lot where the original builder never planned for modern vehicle access.
Victor Salinas has led Ironworks Gate Co. since its founding in 1984. The company has outlasted dozens of one-truck competitors in Tarrant County because we do what we say and we stay in town.
Our Gate Parts & Welding Services in Richland Hills
Hinge Replacement
Most hinge calls in Richland Hills aren’t simple hardware swaps. Decades of black clay heave rack the bracket until the pin binds or the leaf tears through rotted wood. We replace with heavy-duty ball-bearing or greaseable hinges sized to the gate weight, then shim or reseat the post if the clay has shifted it. A typical hinge replacement in Richland Hills runs $180-$340.
Post Replacement
This is the big one in 76180. Original posts from the 1950s-1970s sit in footings often just 18-24 inches deep - nowhere near enough for Tarrant County’s expansive clay. We pull the old post, auger to 36 inches, and pour a proper concrete footing with drainage consideration. Steel posts get primed and painted; wood posts are pressure-treated cedar or redwood. Post replacement in Richland Hills typically costs $450-$650 including footing, concrete, and hardware reset.
Rail Repair
Horizontal rails on wood gates sag when fasteners corrode or when repeated slamming loosens the tenon. We splice split rails, replace rotted sections, and weld steel rail brackets where the original fabrication has fatigued. On steel gates, we grind, weld, and refinish to match existing texture. Rail repair in Richland Hills generally falls between $220-$400.
Custom Welding
Not every gate in Richland Hills matches a catalog. We fabricate brackets, extend striker plates, and build custom latch receivers for odd-sized or historical-style gates where off-the-shelf parts simply don’t fit. Our mobile welding rig handles mild steel, aluminum, and stainless in the field. Custom welding jobs start around $280 and scale with complexity and material.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
We stock and service parts for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Richland Hills customers, this means the correct part on the first visit - no ordering, no second trip, no waiting. We carry Viking and Ghost Controls operators and remotes on our trucks, along with DoorKing and Elite access hardware, because these are the brands we see most often in the mid-cities’ security-conscious installations. If your gate has an operator from any of these lines, we can diagnose, repair, or replace without delay.
Common Gate Parts & Welding Problems We See in Richland Hills Homes
- Decades-old hinge brackets rusted through and racked from post movement in black clay. The original steel was often ungalvanized or thin-gauge, and years of clay heave twist the bracket until the pin seizes or the wood splits around the screws.
- Original 18-24-inch footings snapped laterally during February 2021 freeze-thaw cycles. The hard freeze that hit the mid-cities caused rapid soil contraction; shallow footings had no mass to resist the pull, and posts leaned or lifted outright.
- Alley-loaded gates with insufficient clearance bind and fail to latch after post heave. Richland Hills’s dense lots mean many gates open within inches of a fence or garage wall. A post shift of even an inch can mean the difference between smooth operation and a gate that won’t close.
- Wood frames dried and warped by July and August heat above 100°F. North Texas sun accelerates moisture loss in aging cedar and pine, causing rails to bow and pickets to gap - stress that transfers to hinges and latches.
Pricing for Gate Parts & Welding in Richland Hills, TX
Here is what we typically see for Gate Parts & Welding in Richland Hills:
| Service | Typical Range |
|---|---|
| Hinge Replacement (single gate) | $180 - $340 |
| Post Replacement with 36″ footing | $450 - $650 |
| Rail Repair / Splice | $220 - $400 |
| Custom Welding (field repair) | $280 - $520 |
| Gate Roller Replacement (set) | $160 - $280 |
| Latch & Lock Replacement | $140 - $260 |
What moves the number: post depth required, gate material (steel vs. wood vs. aluminum), whether automation hardware must be removed and reinstalled, and access for our welding rig. We settle on an upfront price before turning a single bolt - a square deal, no surprises on the bill. Estimates are free. Call (833) 754-7503.
Active offers: $50 Off Any Repair Over $250; Free Second Opinion on Any Written Estimate; $89 Seasonal Tune-Up; Senior and Veteran 5% discount, always.
We Also Serve Cities Near Richland Hills
Our service radius covers North Richland Hills, Watauga, Hurst, and Haltom City with the same response commitment and the same stocked trucks. If you’re on the border of 76180 and wondering whether we come to your street, call and ask - chances are we’ve already repaired a gate on your block.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Richland Hills
The root cause is almost always the original footing depth. Most Richland Hills homes were built with gate posts set in 18-24 inches of concrete, which is undersized for Tarrant County’s expansive black clay. After decades of heave-and-shrink cycles - and especially after the February 2021 freeze - the footing cracks or the post leans, and no hinge swap will fix a post that has moved three inches out of plumb. We replace the post with a 36-inch footing to break the cycle. Call (833) 754-7503 for a free assessment.
Yes. We regularly install rolling-code remotes and compact operators for alley-access gates where clearance is measured in inches, not feet. On a recent call near the Richland Hills City Hall area, we replaced a corroded hinge set on a 1960s wood swing gate where decades of clay heave had shifted the post 3 inches out of plumb. We installed a LiftMaster slide-gate opener with rolling-code remotes to match the tight alley access, then reinforced the post with a 36-inch-deep concrete footing to prevent future soil-driven failure. Call (833) 754-7503 to discuss your layout.
Absolutely. These are the majority of our calls in Richland Hills. We splice rotted rails, replace rusted hardware with modern equivalents, and weld custom brackets where the original joinery has failed. We do not push full replacement unless the frame is structurally unsalvageable - our bias is to repair what exists and make it last. Call (833) 754-7503 for an honest opinion.
Yes. Our mobile welding rig handles field fabrication for gates that don’t match standard dimensions or for homeowners who want to preserve a particular historical look. We have built extended striker plates, custom latch receivers, and reinforcement gussets for mid-century ranch gates throughout the 76180 ZIP. Custom welding starts around $280; call (833) 754-7503 for an exact quote based on your gate.
Check three things: whether the gate latches cleanly without lifting or shoving, whether hinges show rust or looseness at the wood interface, and whether the bottom rail clears the ground evenly across its width. If the gate drags on one side, the post has likely shifted in the clay or the frame has begun to rack. Catching it before July and August heat above 100°F accelerates wood drying can mean the difference between a $220 adjustment and a $650 post replacement. Call (833) 754-7503 and we’ll walk through it - or come look for free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richland Hills since 1984.