Gate Parts & Welding in Haltom City, TX - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Parts & Welding Across Haltom City

Gate parts and welding repair in Haltom City typically runs $180-$650 depending on whether you need a simple hinge swap or full post replacement with custom welding, and most jobs are completed in a single visit. Ironworks Gate Co. has been serving Haltom City since 1984, and we know the difference between a quick alley-gate fix off Carson Street and a heavy-duty commercial sliding gate repair along the Belknap corridor. Call us at (833) 754-7503 - a live person answers 24 hours a day, and we’ll give you upfront pricing before we turn a single bolt.

Call (833) 754-7503

We’re familiar with every corner of the 76117 ZIP code, from the postwar bungalows near Haltom Road to the industrial parcels along the Airport Freeway. Haltom City’s unusual mix of 1950s-60s residential lots and active commercial yards means our Gate Parts & Welding team switches between vintage hardware calls and heavy steel fabrication on the same route. That dual demand is rare for a city this size, and it’s why generalist handymen often leave Haltom City jobs half-finished.

Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Parts & Welding Company

We’ve been in business over 42 years. Founded in 1984, Ironworks Gate Co. plans to be here for another forty, and that longevity matters in Haltom City, where we’ve watched fly-by-night operators come and go while homeowners are left with gates that still don’t close right.

Our reviews from Haltom City customers consistently mention the same things: we show up when we say we will, we explain the repair before starting, and we stand behind the work. The 90-Day Done Right Promise - our written Keystone Standard - means no paperwork, no arguing, no exceptions. If it’s not right, we come back and make it right.

Response time to Haltom City is typically same-day or next-day, and our technicians are background-checked, uniformed, and guided by our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.

We also understand the local conditions that break gates here. Haltom City sits on the Blackland Prairie clay belt, and that soil swells with winter rain, then contracts in summer heat that regularly tops 100°F. Posts heave. Gates rack and bind. Shallow footers fail within a season. We’ve learned to dig deeper than the active clay layer, and we don’t cut corners on concrete work.

Our Gate Parts & Welding Services in Haltom City

Hinge Replacement

Original hinges on Haltom City’s 1950s-60s wood alley gates are often rusted through or pulling away from rotted frames. A typical hinge replacement in Haltom City runs $180-$320 for residential gates, including removal of the old hardware and installation of heavy-duty ball-bearing or weld-on hinges sized to the gate weight. On commercial steel gates along Belknap Street, we upgrade to greaseable barrel hinges or custom-fabricated j-bolts that can handle daily cycle counts in the hundreds.

Post Replacement

This is one of our most frequent calls in Haltom City, and for good reason. The clay soil here doesn’t forgive shallow posts. We replace rotted wood posts on vintage alley gates and install steel or treated-lumber posts with concrete footers sunk well below the active clay layer - typically 36-42 inches in this part of Tarrant County. Post replacement in Haltom City generally costs $350-$650 depending on material, gate size, and whether we’re resetting an existing gate or hanging new. We always check the gate frame for square before rehanging; a new post won’t fix a racked gate.

Rail Repair

Bent or broken top and bottom rails are common after North Texas hailstorms dent aluminum and steel panels, or after years of sagging gates pulling rails out of alignment. We straighten steel rails when possible, splice broken wood rails with treated stock, and weld new steel tube sections for commercial gates. Rail repair in Haltom City typically falls between $220-$450. On older wood gates in the residential neighborhoods off Haltom Road, we often find rails that have been “repaired” three times with mismatched lumber; at some point, custom welding a steel replacement frame is the more durable path.

Custom Welding

Our welding shop fabricates braces, gussets, latch mounts, and full gate frames for Haltom City properties that can’t use off-the-shelf parts. The salvage yards and used-car lots clustered along Belknap Street and the Airport Freeway corridor often have gates that have been patched in-house for years with whatever scrap was handy. We cut out the failed sections, match the steel grade, and weld repairs that hold. Custom welding jobs in Haltom City start around $280 for straightforward brace work and run to $600+ for full frame fabrication or commercial track pad re-leveling with welded supports.

Gate Rollers & Track

Sliding gate rollers wear flat, tracks accumulate clay dust and grit, and the combination binds gates until the motor strains or fails. On a Carson Street salvage yard call, we found a heavy steel sliding gate that had been patched in-house for years; the concrete pad under the track had tilted from clay soil movement - a common Haltom City problem. We re-leveled the pad, replaced the worn rollers and track, and welded a new brace, preventing the bind that would have come back within a single summer. Roller and track replacement in Haltom City runs $320-$580 for most commercial gates, less for lighter residential sliders.

Latch & Lock Hardware

We stock and install mechanical latches, electric strikes, and magnetic locks for Haltom City gates, including keyed-alike sets for properties with multiple access points. Most residential latch replacements are $140-$260.

Trusted Brands We Service in Haltom City

Ironworks Gate Co. is trained and equipped on nine major gate-automation brands, and we carry common parts for Haltom City customers to avoid delays. Our inventory includes Linear and Viking control boards, limit switches, and safety sensors; Ghost Controls and DoorKing replacement arms and gear sets; plus hardware for FAAC, BFT, Elite, and Mighty Mule systems. For discontinued parts - common on 1960s-era LiftMaster and early DoorKing openers still running in Haltom City’s older neighborhoods - we source refurbished units or fabricate compatible mounting solutions. Most brand-specific repairs in Haltom City are completed on the first visit because our trucks are stocked for the brands we know are installed here.

Common Gate Parts & Welding Problems We See in Haltom City Homes

• Rotting wood posts on original alley gates. The 1950s-60s bungalows on narrow lots throughout 76117 still have their original wood back gates, and the posts are often punky below grade. Replacement requires proper footer depth, or the clay soil will tilt the new post within two seasons.
• Discontinued opener parts. Legacy LiftMaster and DoorKing systems from the 1960s and 1970s are still running in Haltom City, but factory parts are long gone. We maintain a supply of refurbished components and can retrofit modern actuator arms to existing gate frames when repair isn’t possible.
• Clay soil heave binding gates. The Blackland Prairie clay swells and contracts on a seasonal cycle. Posts shift. Concrete pads tilt. Gates rack and drag. Shallow footers are a local non-negotiable; we dig deeper and use more concrete than codes strictly require.
• Hail damage to panels and pickets. North Texas hailstorms dent aluminum and steel gate panels and crack wood pickets on both residential and commercial properties. Post-storm surges keep our welding shop busy with panel replacement and custom fabrication to match existing designs.

Pricing for Gate Parts & Welding in Haltom City, TX

We Also Serve Cities Near Haltom City

Our shop dispatches daily to Gate Parts & Welding in Haltom City and the surrounding communities: Richland Hills, Watauga, North Richland Hills, and Saginaw. The same clay-soil conditions, the same vintage housing stock, the same need for a company that shows up and stays in business. If your gate is dragging, sagging, or stuck open, we’re nearby.

FAQs - Gate Parts & Welding in Haltom City