Fast, Reliable Gate Installation Across Manor
A new gate installation in Manor typically runs $2,800-$6,500 for most residential projects, with swing and sliding driveway gates being the most common requests we see in ZIP 78653. Our Gate Installation team knows the tight clearances of Shadowglen townhomes and the acreage lots off FM 973 equally well, and we carry the automation brands that hold up to Manor’s demanding clay soil. If you’re ready to talk through your driveway or security gate project, call us at (833) 754-7503. A live person answers, day or night.
Why Ironworks Gate Co. Is Manor’s Preferred Gate Installation Company
We’ve been doing this work since 1984, and we’ve learned that Manor is not like Austin’s western suburbs. The Blackland Prairie clay beneath Shadowglen, the lots along FM 1100, and the newer infill near downtown all move differently than limestone bedrock. That matters when you’re setting a gate post that needs to stay plumb for twenty years.
Our technicians are background-checked, uniformed, and trained on nine automation brands including Viking, Ghost Controls, and DoorKing. Most installations finish in a single visit. We settle on an upfront price before the first bolt turns, and every job carries our written 90-Day Done Right Promise. No paperwork to file. No argument. If it’s not right, we come back and make it right.
We recently installed a dual LiftMaster swing-arm opener on a Shadowglen townhome driveway where tight alley-load clearance left only 3 inches of swing room; we set the gate posts on a caliche-compacted base 48 inches deep to resist the annual clay heave that had cracked every neighbor’s original footing. That’s the kind of local knowledge you earn by showing up in Manor for decades, not by reading a spec sheet.
Our Gate Installation Services in Manor
Swing Gate Installation in Manor
Swing gates remain the most requested style on Manor’s acreage properties and in subdivisions like Shadowglen where driveway width allows. We install single and double swing systems with reinforced posts set deep enough to resist the seasonal clay movement that tilts standard footings within two to three years. For townhome alleys with minimal swing clearance, we engineer tight-radius arms and precise stop positioning so your gate opens fully without brushing the fence line or your neighbor’s parking pad.
Sliding Gate Installation in Manor
When clearance is tight - common on zero-lot-line homes and alley-load driveways throughout Manor’s denser pockets - a sliding gate moves parallel to the fence instead of swinging outward. We fabricate and install cantilever and track-mounted systems, with posts anchored below the clay’s active zone. On properties near drainage easements or low-water crossings, we specify elevated track hardware and debris shields to protect the rollers from flash-flood runoff that carries limbs and gravel across the driveway.
Security Gate Installation in Manor
Manor’s growth has brought increased through-traffic on former rural roads, and homeowners on FM 973, FM 1100, and in the Shadowglen area are adding security gates at a higher rate than we saw even five years ago. We install wrought iron, aluminum, and steel security gates with integrated access control - keypads, telephone entry systems, and rolling-code remotes that resist the signal interference common in dense townhome construction. Every security gate we install in Manor is built to stop an unauthorized vehicle and keep working after the next clay heave cycle.
Pedestrian Gate Installation in Manor
A matching pedestrian gate completes the fence line and gives foot traffic a secure entry point without opening the full driveway system. We weld and hang pedestrian gates to the same post standards as our driveways, with self-closing hinges and latch hardware rated for Manor’s temperature swings and humidity. On Shadowglen properties and similar subdivisions, we coordinate the pedestrian gate style with the main driveway gate for a consistent look that satisfies HOA requirements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Manor
We carry automation inventory and replacement parts for Viking, Ghost Controls, and DoorKing, plus six additional major brands, so Manor customers aren’t waiting on a warehouse shipment when their gate needs attention. Our technicians are certified on the full line-up: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means the right part, the right programming, and the right adjustment on the first visit - whether we’re installing fresh or servicing a system that’s been on your property since the 2010s development boom.
Common Gate Installation Problems We See in Manor Homes
- Clay-heaved concrete footings tilting gate posts out of plumb. Manor’s Blackland Prairie clay swells dramatically after spring rains and contracts hard during summer drought, cracking standard footings and binding swing arms mid-arc. We rebuild these with deeper, wider caliche-compacted bases that stay put.
- Debris impact damage from flash-flood runoff. Gates near drainage easements and low-water crossings in the Colorado River basin take hits from limbs, gravel, and sediment after heavy storms. We specify reinforced framing and elevated hardware for these locations.
- Rolling-code remotes losing sync in dense construction. The tight townhome clusters in Shadowglen and similar developments create signal interference that frustrates standard remote programming. We install frequency-hardened receivers and walk customers through clean pairing procedures that hold.
- Original 2010s-era openers failing on acreage lots. Many automatic gates installed during Manor’s rapid growth period are now hitting their first replacement cycle, often compounded by years of clay-driven misalignment that overworked the motors.
Pricing for Gate Installation in Manor, TX
Here’s what we typically see for Gate Installation in Manor:
| Service | Typical Range in Manor |
|---|---|
| Single swing gate with basic automation | $2,800-$4,200 |
| Double swing gate with dual openers | $4,500-$6,500 |
| Sliding gate (cantilever or track) | $3,800-$5,800 |
| Security gate with access control | $5,200-$8,500 |
| Pedestrian gate (weld and hang only) | $1,200-$2,400 |
| Post footing rebuild (clay-heave repair) | $800-$1,600 per post |
These ranges reflect Manor’s current market, including the deeper footings and caliche compaction we specify for local clay conditions. Final cost depends on gate width, material choice, automation features, and whether we’re working from existing posts or starting fresh. We provide a written, itemized estimate before any work begins - no surprises on the bill. Call (833) 754-7503 to schedule a free estimate at your property.
Active offers: $50 off any repair over $250. Free second opinion on any written estimate. $89 seasonal tune-up. Senior and veteran discount of 5%, always.
We Also Serve Cities Near Manor
Our service area extends to Hornsby Bend, Pflugerville, Elgin, and Wells Branch, with the same 24-hour live answer and same-day scheduling when urgency demands it. Wherever you are in eastern Travis County, we bring the same post standards and written guarantee.
Serving Manor, TX - Our Local Coverage Area
We’re based in the Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Manor
Manor sits on the Blackland Prairie, where expansive black clay soil swells when wet and shrinks when dry, heaving posts and cracking footings on a near-annual cycle. Austin’s western Hill Country suburbs rest on more stable limestone bedrock that doesn’t move like this. We account for this by setting posts deeper, with caliche-compacted bases that resist the clay’s seasonal drama. Call (833) 754-7503 if your gate has started binding or dragging - estimates are free.
We set gate post footings 48 inches deep minimum in Manor, with a wider base pad compacted in caliche rather than standard concrete alone. This puts the footing below the active clay zone and spreads the load to prevent the tilting and cracking we see on original installations that used shallower pours. The exact depth varies with gate weight and swing arm torque - we’ll specify yours in writing before we dig. Call (833) 754-7503 for a free on-site assessment.
Yes. Shadowglen and similar Manor townhome developments often have alley-load driveways with 3 to 6 inches of swing clearance. We install sliding gates or tight-radius swing systems with precise stop positioning and low-profile openers that fit the space without sacrificing security. We measure twice, fabricate to fit, and guarantee the clearance in writing. Call (833) 754-7503 to walk through your driveway layout.
No brand eliminates clay heave, but LiftMaster, Viking, and Ghost Controls all make openers with adjustable force limits and obstruction sensitivity that tolerate minor post movement without burning out the motor. We pair the right opener with deep, stable footings so the system isn’t fighting misalignment every cycle. Our technicians are trained and equipped on all nine brands we carry. Call (833) 754-7503 and we’ll match the opener to your gate type and soil conditions.
If your property sits near a drainage easement, low-water crossing, or the flash-flood-prone stretches of the Colorado River basin, we recommend elevated track hardware, debris shields, and reinforced gate framing. Standard installations in these locations regularly suffer impact damage and sediment jamming after storm events. We’ll assess your specific flood exposure during our free estimate and specify accordingly. Call (833) 754-7503 to schedule.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Manor and eastern Travis County since 1984.