Fast, Reliable Gate Parts & Welding Across Manor
Gate parts and welding repair in Manor typically runs $180-$650 depending on whether you need hinge work, post resetting, or full rail fabrication, and most jobs are completed in a single visit with upfront pricing settled before we start. We carry common parts for Linear, Viking, and Ghost Controls systems on every truck, so Manor homeowners aren’t left waiting for a second trip.
We’ve been serving the eastern Travis County corridor since 1984, and our Gate Parts & Welding team knows Manor’s ground better than most contractors who just pass through on FM 973. The black clay soils out here move. Gates shift. Posts lean. We’ve rebuilt footings in Shadowglen, rewelded ranch gates off FM 1100, and freed seized rollers from clay mud after spring floods. When you call (833) 754-7503, a live person answers, 24 hours a day, 7 days a week. No voicemail. No callback queue.
Why Ironworks Gate Co. Is Manor’s Preferred Gate Parts & Welding Company
Manor isn’t Austin, and gate repair here isn’t either. The limestone Hill Country west of I-35 stays put. Manor’s Blackland Prairie clay doesn’t. We’ve spent four decades learning the difference.
Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. That means the 400th gate in Manor gets the same care as the first. Every job carries our 90-Day Done Right Promise, known internally as the Keystone Standard. Written. No paperwork. No arguing. If it isn’t right, we come back and make it right.
Most of our Manor calls come from homeowners who’ve already been burned by a handyman who didn’t understand automated gate systems, or by an out-of-town company that quoted low and disappeared when the clay heaved again six months later. We’re not the cheapest bid. We’re the last call you’ll need to make.
We answer the phone live, day or night. We show up when we say. And we settle on a price before turning a single bolt.
Our Gate Parts & Welding Services in Manor
Hinge Replacement
Manor’s clay-soil cycle destroys gate hinges faster than almost any mechanical wear. When posts shift, hinges bind, bolt holes elongate, and eventually the gate sags or jams. We stock heavy-duty adjustable hinges rated for the load, and we weld custom mounting plates when the original steel has fatigued. In the older acreage properties off FM 973, we’ve replaced hinges on 40-year-old wrought iron gates that outlasted three previous repair attempts by generalists.
Post Replacement
This is the repair we do most often in Manor, and it’s almost always clay-related. Last spring in Shadowglen, we replaced a LiftMaster LA400 swing-arm opener on a driveway gate whose pillar footing had tilted 3 inches from clay heave. The arm couldn’t complete its arc, so we rebuilt the footing with a deeper caliche-compacted base and realigned the post before welding new hinge brackets. Post replacement in Manor runs $350-$650 including footing work, and we don’t pour concrete until we’ve compacted caliche below the frost line to give that post a fighting chance against the next wet-dry cycle.
Rail Repair
Bent or cracked rails from debris impact are common near Manor’s drainage easements and low-water crossings, especially after the flash-flood events that roll through the Colorado River basin. We can often section-repair a rail with custom welding rather than replacing the entire gate frame, saving homeowners significant cost. Our mobile welding rig handles steel, aluminum, and ornamental iron on-site, so the gate stays put while we work.
Custom Welding
Manor’s mix of newer subdivision gates and older ranch fencing means we regularly fabricate parts that aren’t available off the shelf. Custom hinge brackets for shifted posts. Stainless steel roller housings that won’t seize in clay mud. Reinforcement gussets for rails that took a hit from flood debris. Our welders are certified for structural and ornamental work, and every weld is ground, cleaned, and primed before we leave.
Gate Rollers
Slide gates in Manor take a beating. The galvanized rollers that come standard on many systems seize solid after a few seasons of clay mud and grit. We’ve started welding stainless steel replacement rollers with sealed bearings for properties in flood-prone areas, and the difference in longevity is substantial. Roller replacement runs $180-$340 for most residential slide gates in ZIP 78653.
Latch & Lock
When posts shift, latches misalign. When latches misalign, motors strain, electronics fail, and security gaps open. We realign, replace, or upgrade latches and locking hardware to match the actual position of your gate, not where it used to be.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Manor
We are trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Manor homeowners, this means the correct fix on the first visit, whatever is on your driveway. We stock common parts for Linear, Viking, and Ghost Controls systems locally, so most repairs don’t wait on shipping. If you have a Viking slide gate operator taking strain from a heaved post, or a Ghost Controls swing arm that keeps throwing fault codes after another wet spring, we’ve seen it and we’ve fixed it.
Common Gate Parts & Welding Problems We See in Manor Homes
- Clay-heaved concrete footings tilting gate posts. Manor’s Blackland Prairie clay swells dramatically after spring rains and contracts sharply during summer droughts, causing gate posts to shift, lean, or crack their footings on a near-annual cycle. This misaligns swing-arm opener travel arcs and is the dominant repair driver in ZIP 78653.
- Debris-impact damage to slide gates near drainage easements. Manor’s position in a flash-flood-prone stretch of the Colorado River basin means gates near low-water crossings regularly sustain damage after storm events, bending rails and knocking rollers off track.
- Galvanized gate rollers seizing in wet clay mud. Standard rollers fill with grit and moisture, locking up slide gates until they’re either freed with force or replaced with better hardware.
- Swing-arm openers failing from post drift. On the acreage roads north and east of Manor’s townsite, early-2010s swing-arm installations now commonly show cracked or tilted pillar footings heaved beyond the opener’s adjustment range.
Pricing for Gate Parts & Welding in Manor, TX
We believe in a square deal: upfront price, no surprises on the bill. Here’s what typical gate parts and welding work costs in Manor’s market:
| Service | Typical Range in Manor |
|---|---|
| Hinge replacement (pair) | $180-$280 |
| Gate roller replacement | $180-$340 |
| Rail repair / section welding | $220-$450 |
| Post replacement with footing | $350-$650 |
| Custom welding / fabrication | $280-$550 |
| Latch & lock realignment or replacement | $140-$260 |
What moves the needle: depth of footing work needed for clay conditions, whether the gate is steel or ornamental iron, and accessibility. A townhome with tight alley access takes more time than a wide ranch driveway. We assess on-site and give you a written estimate before starting. Estimates are free. Call (833) 754-7503.
Active offers: $50 off any repair over $250. Free second opinion on any written estimate. $89 seasonal tune-up. Senior and veteran discount of 5%, always.
We Also Serve Cities Near Manor
Our service area covers the full eastern Travis County corridor and beyond. We regularly run calls to Manor neighbors in Hornsby Bend, Pflugerville, Elgin, and Wells Branch. Same live-answer phone, same 90-Day Done Right Promise, same upfront pricing wherever we go.
Serving Manor, TX - Our Local Coverage Area
We’re based in the Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Manor
Manor sits on the Blackland Prairie’s expansive black clay soils, which swell when wet and shrink when dry, while Austin’s western suburbs rest on stable limestone Hill Country. This seasonal heave-cycle tilts and cracks concrete footings in ZIP 78653 far more aggressively than in limestone areas. We rebuild Manor footings with deeper, caliche-compacted bases specifically to counter this. Call (833) 754-7503 for a free assessment of your post stability.
We carry parts for all nine brands we service, with Linear, Viking, and Ghost Controls hardware in stock for most common failures. For clay-specific issues like post drift and seized rollers, we also fabricate custom stainless steel components on-site that outlast standard galvanized parts in Manor’s wet-mud environment. We can match the right hardware to your actual ground conditions, not just your opener model.
If your gate post has shifted before, yes. Standard footings in Manor’s Blackland Prairie clay often fail within a few seasons. We rebuild with caliche-compacted bases set below the active soil zone, which adds upfront cost but prevents the repeat repair cycle that cheaper fixes guarantee. We’ve done this exact work throughout Shadowglen and on acreage lots off FM 973 and FM 1100.
Usually, yes. If the crack is localized and the surrounding frame is structurally sound, we section-repair with custom welding, grinding the joint smooth and priming for weather resistance. We only recommend full rail replacement when the damage is extensive or the metal has thinned from corrosion. We’ll show you both options and the price for each before deciding.
Most repairs are completed same-day or next-day, including in tight-access properties. Our trucks carry compact welding rigs and common parts, so we don’t need to return. For alley-load townhomes in Manor, we coordinate arrival times that work with your parking constraints and bring the right equipment the first time. Call (833) 754-7503 to schedule, and we’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Manor and communities across Texas since 1984.