Fast, Reliable Gate Repair Across Hurst
Gate repair in Hurst typically runs $180-$650 depending on whether you’re dealing with a simple hinge replacement or a full post reset in clay-compromised soil, and our Gate Repair team completes most jobs in a single visit. We answer calls live, 24 hours a day, 7 days a week, and we carry parts for Viking, Linear, and DoorKing openers on every truck serving Tarrant County.
We’ve been working Hurst’s neighborhoods since 1984, and we know the rhythm of this city. The 1960s-70s ranch homes stretching across ZIP 76053, the wrought-iron estates near Bellaire Drive, the wood privacy gates tucked behind brick facades on Harwood Road. These gates weren’t built for the Blackland Prairie clay they’re sitting on. The soil swells with spring rain, contracts in August drought, and slowly tilts posts out of plumb year after year. That’s not a hardware problem you can swap at a big-box store. It’s a local condition that demands local experience.
When your gate won’t latch, sags against the driveway, or grinds open at half speed, you want the technician who shows up to recognize the real issue before he unloads his tools. In Hurst, that real issue is often the footing, not the gate. Call (833) 754-7503. We’ll answer, we’ll give you an upfront price, and we’ll be there when we say.
Why Ironworks Gate Co. Is Hurst’s Preferred Gate Repair Company
Forty-two years in this trade teaches you the difference between a town where gates fail from wear and a town where they fail from the ground beneath them. Hurst is the second kind. We’ve reset hundreds of posts in ZIP 76053 neighborhoods where the original 1970s concrete anchors have cracked clean through from decades of clay heave. Our customers remember our names. They call back when their neighbor’s gate starts sagging.
Our response time to Hurst averages under two hours for standard calls, and we stock heavy-duty posts, deeper-setting concrete mixes, and corrosion-resistant hardware specifically for North Texas soil conditions. No waiting on parts. No second trips because the technician guessed wrong about why the gate was binding.
Every technician who steps onto your property is background-checked, uniformed, and working under our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. And every repair, every weld, every post reset is covered by our 90-Day Done Right Promise - written, no paperwork, no arguing. If it’s not right, we come back and make it right. That’s the Keystone Standard.
Our Gate Repair Services in Hurst
Post Repair
This is the repair we perform most often in Hurst, and it’s the one other companies miss. The Blackland Prairie clay beneath your gate post absorbs spring rainfall like a sponge, then bakes to concrete hardness by July. That cycle tilts posts, cracks original footings, and leaves gates racked out of square no matter how many times you adjust the hinges. We dig to stable depth, set a new post with concrete formulated for expansive soil, and only then do we hang the gate true. A post reset in Hurst typically runs $280-$450. Done right, it outlasts the next decade of Texas weather.
Gate Realignment
A gate that’s shifted even an inch won’t latch, drags on the driveway, or strains the opener motor until it burns out. In Hurst’s older neighborhoods, realignment is almost always a structural correction, not a turn of a screw. We measure the frame against the post, check for twist in the gate itself, and reset the geometry before the hardware takes another season of strain. Realignment work in Hurst runs $180-$320 for standard residential gates, more for oversized wrought-iron or automated systems.
Weld Repair
The wrought-iron gates on Hurst’s 1960s-70s ranch homes were built to last, but welds corrode at stress points and brackets fatigue after forty years of vibration. Our mobile welding rig handles field repairs on steel, aluminum, and iron without removing the gate. A typical weld repair on a residential gate in Hurst costs $200-$380. We grind, prep, and finish to match existing work so the repair disappears into the gate’s character.
Hinge Repair
Hinges on aging wood gates rot where they meet the frame, and the bolt holes wallow out from years of sagging weight. In Hurst, we see this constantly on original cedar and pine gates that have never been rehung. We replace with heavy-duty ball-bearing or greaseable hinges sized to the gate’s actual weight, not what was cheapest in 1978. Hinge replacement in Hurst runs $150-$280 per gate.
Lock Repair
Gate locks corrode, mechanisms jam, and keyed latches misalign as frames shift. We service mechanical and magnetic locks, install keypad and smart-entry systems, and realign strike plates to match corrected gate geometry. Lock repair or replacement in Hurst typically runs $140-$260, with smart upgrades starting higher.
Rust Treatment
North Texas humidity collects on steel gates in shaded entryways, and rust advances faster than owners notice. We grind to clean metal, treat with conversion coating, and finish with primer and paint matched to your gate. Rust treatment for a standard residential gate in Hurst runs $220-$400 depending on extent.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We carry certified parts and diagnostic tools for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Hurst customers, that means we don’t order parts after we leave. Our trucks stock Viking and Linear control boards, DoorKing actuator arms, and Ghost Controls solar-compatible hardware for the longer drives common in Hurst’s acreage-style properties. Most opener repairs in Hurst finish in under two hours because the correct component is already on the shelf behind the cab.
Common Gate Repair Problems We See in Hurst Homes
- Posts shifting in absorbent clay soil. The leading failure mode in ZIP 76053. Original footings were poured shallow, before builders understood Blackland Prairie expansion. We reset posts deeper with soil-stabilized concrete, or the gate sags again within a season.
- Aging 1970s wood gates rotting at hinge points. Cedar and pine frames in Hurst’s ranch-home neighborhoods have absorbed forty years of moisture where hinges penetrate. The wood softens, bolts loosen, and the gate torques out of shape. We sister new frame material or recommend replacement when rot is structural.
- Overhead garage door openers misapplied to heavy driveway gates. We find this regularly in Hurst: a previous owner installed a garage-door motor on a 300-pound wrought-iron swing gate. The motor strains, overheats, and fails prematurely. We replace with properly rated gate operators from Viking or Linear, sized to actual gate weight and wind load.
- Gate frames racked out of square from post tilt. Even a two-inch post lean translates to binding at the latch and uneven load on the opener. We square the frame, reset the post, and only then tune the automation. Skipping the post is why callbacks happen.
Pricing for Gate Repair in Hurst, TX
Honest pricing means numbers, not vague promises. Here’s what gate repair costs in Hurst’s market:
| Service | Typical Range in Hurst |
|---|---|
| Hinge repair/replacement | $150 - $280 |
| Lock repair/replacement | $140 - $260 |
| Gate realignment | $180 - $320 |
| Weld repair | $200 - $380 |
| Post reset with concrete | $280 - $450 |
| Rust treatment (full gate) | $220 - $400 |
| Opener repair (parts + labor) | $240 - $480 |
| Opener replacement | $680 - $1,400 |
What moves the needle: gate material and weight, automation complexity, soil condition requiring deeper excavation, and whether the post footing has failed entirely. We diagnose on-site, explain what we found, and settle the price before we start. No surprises on the bill. Every repair over $250 qualifies for $50 off. Seniors and veterans receive 5% off, always. Call (833) 754-7503 for a free estimate - we’ll come to you, measure the job, and give you a written number.
We Also Serve Cities Near Hurst
Our Gate Repair in Hurst coverage extends throughout central Tarrant County, including Bedford to the southeast, Richland Hills and North Richland Hills along the Airport Freeway corridor, and Colleyville to the northeast. Same trucks, same parts inventory, same 90-Day Done Right Promise. If your gate is sagging in any of these communities, the same technician who knows Hurst’s clay soil knows your neighborhood’s conditions too.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hurst
Because the post wasn’t reset. In Hurst’s ZIP 76053 neighborhoods, the original 1970s concrete footings have cracked from decades of Blackland Prairie clay movement. A technician who swaps hinges without checking the footing is treating the symptom. We check the post first. If it’s tilted or loose, we reset it with deeper, soil-stabilized concrete before we touch the hardware. That repair holds. Call (833) 754-7503 for an inspection - estimates are free.
It depends on where the metal has fatigued. If the hinge bracket has torn away clean, welding it back to sound metal restores original strength and preserves the gate’s character. If the parent metal around the bracket is thinned from rust or stress-cracked, welding is a temporary fix and replacement serves you better. We evaluate on-site and tell you straight which path lasts longer. For a gate that’s lasted forty years in Hurst weather, we respect the craft that built it and won’t recommend work that wastes your money.
We are certified and stocked for nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Hurst’s heavier wrought-iron and automated estate gates, we most commonly install and service Viking and Linear heavy-duty swing and slide operators. We carry control boards, actuator arms, and safety sensors for these brands on every truck serving Tarrant County. Call (833) 754-7503 - whatever is on your driveway, we’ve worked on it before.
Yes, if the frame is still sound. We see these original cedar and pine gates throughout Hurst’s ranch-home neighborhoods. The wood often softens at hinge points and the frame racks out of square, but the gate itself can frequently be saved. We sister new hardwood at stress points, replace rotted hinge backing with treated lumber, and realign the frame to a reset post. If the frame is too far gone, we’ll tell you honestly and quote a replacement built to the same opening. Realignment of a salvageable 1970s wood gate in Hurst runs $180-$320.
Most standard repairs - hinge replacement, lock service, realignment after post reset - finish in two to three hours. Post resets add time for concrete cure, though we use rapid-set mixes that allow full gate rehang same day. Opener replacements on heavy automated gates run four to six hours including programming safety sensors and testing cycle counts. We complete 90% of Hurst jobs in a single visit because we diagnose thoroughly by phone and arrive with the right parts. Call (833) 754-7503 to schedule - we’ll give you a realistic time estimate when we book.
Last spring, we replaced the rusted chain-drive opener on a 16-foot wrought-iron gate at a 1960s ranch home on Bellaire Drive. The original LiftMaster unit had burned out after years of straining against a post that had tilted 4 inches from clay heave; we reset the post with deeper concrete and upgraded to a heavy-duty Viking swing opener. The gate closes now like the day it was hung. That’s the work we do in Hurst.
Your gate has already lasted through decades of Texas weather. With the right repair, it will last through decades more. We’re Ironworks Gate Co., founded in 1984, and we plan to be here for another forty years. When you’re ready for a square deal - upfront price, no surprises on the bill, and a written guarantee that means something - call (833) 754-7503. A live person will answer, 24 hours a day, 7 days a week.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst and Tarrant County since 1984.