Fast, Reliable Gate Repair Across Everett
Gate repair in Everett, MA typically costs between $180 and $650 depending on the problem, and most jobs are completed in a single visit with upfront pricing settled before we start. We’re familiar with the narrow shared driveways off Broadway and Ferry Street, the salt-heavy air rolling off the Mystic River, and the wrought-iron gates that have hung on Everett’s triple-deckers since the 1920s. If your gate is sagging, rusted, or won’t latch after another hard winter, call us at (833) 754-7503. A live person answers 24 hours a day, 7 days a week, and we’ll give you a straight answer about whether it makes sense to repair or replace.
We’ve been doing this work since 1984, and our Gate Repair team has learned that Everett is not like the inland suburbs. The combination of freeze-thaw cycles, road salt runoff, and tidal salt moisture means gates here fail differently and faster. We carry parts for nine automation brands and keep common hinge, post, and weld hardware on the truck so we’re not making a second trip.
Why Ironworks Gate Co. Is Everett’s Preferred Gate Repair Company
Everett homeowners call us because we understand the physical reality of their properties. We’ve worked on the cramped shared driveways near Encore Boston Harbor, the triple-decker blocks around 02149, and the small rear yards where a standard gate swing simply isn’t possible. Our technicians are background-checked, uniformed, and trained on the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it.
Our reputation in Everett is built on showing up when we say we will and pricing the job before we turn a bolt. The 90-Day Done Right Promise applies to every repair - written, no paperwork, no arguing. If it’s not right, we come back and make it right. That’s the Keystone Standard, and it’s been our way for over 42 years.
We also know the brands Everett property owners rely on. Our trucks carry parts and diagnostic tools for Linear, Viking, Ghost Controls, and DoorKing openers, among others, so we can often fix the motor on the spot rather than ordering parts and making you wait.
Response time to Everett is typically same-day or next-day, and our live phone support means you’re talking to a person who can dispatch a technician, not leaving a voicemail and hoping someone calls back Monday.
Our Gate Repair Services in Everett
Hinge Repair
Hinges on Everett’s older wrought-iron and galvanized chain-link gates corrode faster than almost anywhere we work. The salt-laden air off the Mystic River, combined with decades of road salt washing into shared driveways, eats through hinge pins and welds that would last twenty years inland. We replace with marine-grade or stainless hardware where it makes sense, and we always check the gate plumb before we leave - a sagging hinge will destroy the new one in a season if the frame is out of square.
Post Repair
Gate posts in Everett heave. It’s that simple. Boston’s freeze-thaw cycle pushes posts set in older concrete slabs out of plumb every spring, and we see it first on the triple-decker blocks where the original masonry or wood posts have never been replaced. We reset posts in fresh concrete footings pitched to shed water, and on tidal blocks near the river, we use hardware and coatings rated for salt exposure. A post repair in Everett typically runs $280-$450, and it’s almost always the right fix rather than replacing the whole gate.
Weld Repair
Rust never sleeps in Everett, and we’ve welded gates back together on Ferry Street, Broadway, and the dense residential blocks where a gate failure means a car trapped in a shared driveway. We MIG or stick-weld wrought-iron and steel frames, grind smooth, and apply cold-galvanizing or epoxy primer to slow the next round of corrosion. Weld repair ranges from $180 for a simple crack to $420 for extensive frame rebuilding. We tell you honestly when the metal is too far gone to weld reliably - sometimes replacement is the square deal.
Gate Realignment
On the dense residential blocks off Broadway and Ferry Street, shared driveways often run only 8-9 feet wide. A standard double-swing gate physically cannot operate without hitting the neighboring structure. Our crew frequently discovers this on arrival and must convert to a single-leaf or sliding configuration on the spot - a site condition that comes up far more often in Everett than in any surrounding town. Realignment or conversion typically costs $340-$650 depending on whether we need new track, rollers, or actuator hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everett
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Everett customers, this means the correct fix on the first visit, whatever is mounted on your driveway. We stock common Linear and Viking control boards, Ghost Controls actuator arms, and DoorKing safety sensors on our trucks, so most automation repairs don’t wait on parts. If your opener is failing after rain or binding every spring, we’ll diagnose whether it’s a wiring issue, a failing board, or physical gate drag - and we’ll tell you before we start the work.
Common Gate Repair Problems We See in Everett Homes
- Posts heaved by freeze-thaw. Everett typically sees 40-plus inches of snow and repeated hard freezes. Older concrete footings crack, posts tilt, and gates bind or won’t latch. We see this every April.
- Salt corrosion on hinges and welds. Road salt runoff and Mystic River moisture accelerate rust far beyond what we find in landlocked Malden or Medford. Hinge pins seize, welds crack, and chain-link frames weaken at stress points.
- Double-swing gates in 8-foot driveways. The triple-decker layout forces unexpected swing-to-slide conversions. We arrive prepared to reconfigure on site rather than tell you to call someone else.
- Automation strain from physically failing gates. Openers burn out motors trying to move gates with heaved posts or corroded hinges. We fix the gate first, then the motor - otherwise you’re replacing the opener again next year.
Pricing for Gate Repair in Everett, MA
We believe in a square deal: upfront price, no surprises on the bill. Here is what typical gate repair costs in Everett’s market:
- Hinge repair or replacement: $180-$290
- Post reset in new concrete footing: $280-$450
- Weld repair (minor to moderate frame): $180-$420
- Gate realignment or swing-to-slide conversion: $340-$650
- Lock or latch repair: $140-$220
- Rust treatment and protective coating: $160-$280
- Automation diagnostic and repair: $220-$480
What moves the price: extent of corrosion, whether posts need full replacement versus reset, automation brand and parts availability, and whether we need to reconfigure for a narrow driveway. We inspect, quote, and get your approval before we start. Estimates are free. Active offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Everett
Our service area extends to Everett and surrounding communities including Eastmont, Mukilteo, Mill Creek, and Silver Firs. Whether you’re on the tidal blocks near the Mystic River or inland toward the newer developments, we bring the same 42 years of craft and the same written 90-Day Done Right Promise.
Serving Everett, MA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Everett
Everett’s freeze-thaw cycle heaves older concrete footings that were poured without proper depth or drainage. Boston-area winters deliver 40-plus inches of snow and repeated hard freezes, and water trapped around post bases expands and contracts until the footing cracks. We reset posts in fresh concrete with proper pitch and, where needed, gravel drainage to slow the cycle. Call (833) 754-7503 for a free inspection - estimates are free.
Yes, we weld and restore wrought-iron gates regularly on Everett’s triple-decker blocks, and we work within the tight access those shared driveways require. We grind to clean metal, weld cracks or build up thin sections, and apply protective coating. If the frame is too far gone, we’ll tell you honestly - sometimes a replacement gate built to the same dimensions is the longer-lasting fix. Call (833) 754-7503 and we’ll look at it.
We can match or adapt hardware for most legacy gates and openers, including one-piece and early sectional systems common in Everett’s older housing stock. Parts availability varies by brand and age; if the original manufacturer is defunct, we fabricate or source compatible hardware. We also advise when the cost of repeated repairs on aging equipment exceeds the value of a modern replacement. Call (833) 754-7503 for an exact assessment - estimates are free.
Everett’s position directly on the Mystic River means salt-laden air is a year-round factor, visibly outpacing rust rates in landlocked neighbors like Malden or Medford. Road salt runoff from heavily treated streets accelerates corrosion in shared driveways where drainage is poor. We use hardware and coatings rated for marine exposure, and we design repairs knowing the salt will return. Call (833) 754-7503 if you’re seeing premature hinge or weld failure - we can show you what to expect.
It could be wiring, but in Everett we more often find that the opener is straining against a physically compromised gate - heaved posts, corroded hinges, or a frame out of plumb. Water infiltration into control boxes or underground conduit is also common where salt accelerates corrosion. We diagnose the root cause rather than replacing the opener alone, because a new motor will burn out just as fast if it’s fighting a dragging gate. Call (833) 754-7503 - we’ll sort out whether it’s electrical, mechanical, or both.
Ready to Get Your Gate Fixed Right?
A gate that won’t close or a motor that grinds every morning is not something you should have to live with. We’ve repaired gates on Everett’s triple-deckers, converted swings to slides in 8-foot driveways, and realigned posts heaved by another hard winter. Every job carries our 90-Day Done Right Promise in writing, and a live person answers the phone 24 hours a day, 7 days a week. Call (833) 754-7503 for a free estimate. We’ll be there when we say, we’ll price it before we start, and we’ll stand behind it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everett since 1984.