Fast, Reliable Gate Parts & Welding Across Xenia
Gate Installation - Xenia and welding repair typically costs $180-$650 depending on the component, with most hinge realignments and post resets completed in a single visit. We’re Ironworks Gate Co., and we’ve been serving southwestern Ohio homeowners since 1984. If your gate is dragging, sagging, or seized shut, call us at (833) 754-7503. A live person answers twenty-four hours a day, seven days a week.
Xenia holds a story no other Greene County city shares. After the 1974 Super Outbreak F5 tornado leveled entire neighborhoods, the city rebuilt fast. Fence gates went up quickly on disturbed fill soil with shallow footings. Now, fifty years later, that cohort of post-disaster gates is failing all at once. Posts heave every winter. Hinges bind. Weld points crack. We know these patterns because we’ve worked them. Our Gate Parts & Welding in Xenia crews are on the road to the 45385 zip code and surrounding blocks daily.
From the ranch homes along Cold Springs Drive to the split-levels near Shawnee Park, we see the same sequence: frost heave tilts the post, the gate drops, the hinges seize, and the homeowner fights the gate every morning. It does not fix itself. We reset posts below the frost line, fabricate custom brackets, and weld rails back square so the gate swings the way it was meant to.
Why Ironworks Gate Co. Is Xenia’s Preferred Gate Parts & Welding Company
We have been in business for over forty-two years. That means we started welding gates when many of Xenia’s current post-1974 rebuild fences were brand new. We have seen how those installations age, and we know which repairs hold and which ones waste a homeowner’s money.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands including FAAC, BFT, and Linear. When we arrive at a Xenia home, we carry the parts to complete most jobs in one visit. No waiting on shipments. No return trips. Our Gate Parts & Welding team settles on an upfront price before touching a single bolt.
Every job carries our 90-Day Done Right Promise, the Keystone Standard. Written. No paperwork to file. No argument. If it is not right, we come back and make it right. That applies to a hinge swap on a Beavercreek Road property or a full post reset in the older blocks near Main Street.
We also keep standing offers active for Xenia homeowners: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Our Gate Parts & Welding Services in Xenia
Hinge Replacement
Xenia’s freeze-thaw cycles destroy hinges. Water seeps into the pivot, expands, and seizes the barrel. On older post-1974 gates, the original hinges were often light-duty steel that rusted through in twenty years. We replace them with heavy-gauge, greasable hinges sized to the gate weight. In the central neighborhoods where original rebuild-era gates still stand, hinge replacement is our most common call. Typical range in Xenia: $180-$340.
Post Replacement
Here is the truth about Xenia’s gate posts. After the 1974 tornado, contractors backfilled foundations with disturbed soil, compacted hastily. Decades of Ohio frost heave have pushed those posts out of plumb. Resetting a post in the same shallow hole fixes nothing. We excavate to below the frost line, pour a concrete footing, and set a galvanized post sleeve so the post stays vertical through the next hard winter. On a Cold Springs Drive ranch built in 1978, we swapped a seized LiftMaster chain-drive Xenia Gate Motor & Opener and realigned the gate frame after frost heave had twisted the original post. The homeowner had been unable to open the gate for two winters; we installed a replacement pivot bracket and a new post sleeve that sits below the frost line. Post replacement in Xenia runs $320-$580 depending on depth, concrete, and whether we are resetting an existing gate or hanging new.
Rail Repair
Chain-link and ornamental gates from the 1970s and 1980s develop rail sag as the frame welds fatigue. Xenia’s wind exposure, higher than many Ohio markets due to the city’s position in the tornado corridor, accelerates this. We cut out cracked sections, fabricate replacement rail segments, and weld them back with proper penetration. For gates where the rail is too far gone, we advise honestly. Rail repair in Xenia: $240-$420.
Custom Welding
Some Xenia gates need what no catalog sells. A bracket to adapt a modern FAAC operator to a 1978 frame. A gusset plate to stiffen a rail that has racked in high wind. We fabricate on-site with a mobile welding rig, working in steel, aluminum, and iron. Our welders hold to the same K.E.Y.S. code as every Ironworks technician: Krafted right, Every time, Your home first, Standing behind it. Custom welding in Xenia starts at $280 and scales with complexity.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Xenia
We stock and service parts for nine major automation brands, including FAAC, BFT, Linear, and Viking. For Xenia homeowners with legacy operators, this matters. A 1980s LiftMaster chain-drive unit may have obsolete control boards, but the mechanical frame often outlasts the electronics. We carry Gate Access Control in Xenia adapter kits, replacement limit switches, and modern safety entrapment devices that bring old operators up to current standards without full replacement. When the operator is truly done, we install new from the brands we know inside and out. Most parts are on the truck when we pull into your Xenia driveway.
Common Gate Parts & Welding Problems We See in Xenia Homes
- Posts heaving out of disturbed fill soil. The post-1974 rebuild era left Xenia with thousands of gates set in poorly compacted backfill. Every winter’s freeze-thaw cycle lifts the post another fraction of an inch. After fifty years, the gate leans, drags, or will not latch. Post replacement with a proper below-frost-line footing is the only lasting fix.
- Legacy hinge barrels seized solid. Original hinges on 1970s ranch gates were rarely greasable and rarely painted on the hidden faces. In Xenia’s humid summers and salted winter air, they rust through. The gate sags on bent pintles until someone forces it and snaps the bracket.
- Weld points cracked by decades of frame flex. Chain-link gates especially suffer as rails sag and the frame racks. Each wind event works the weld a little more. Eventually the rail separates or the corner gusset tears. Custom welding restores the frame geometry.
- Operator mounting brackets fatigued from frost-twisted frames. When a post heaves, the gate frame twists. The operator arm, bolted rigidly to both post and gate, fights this misalignment until the bracket cracks or the internal gears strip. We see this on older Xenia properties every spring after the ground thaws.
Pricing for Gate Parts & Welding in Xenia, OH
We do not quote blind. When you call (833) 754-7503, we ask the right questions and give an upfront price range before we drive. Here is what gate parts and welding costs in the Xenia market:
| Service | Typical Range in Xenia |
|---|---|
| Hinge replacement (pair) | $180 - $340 |
| Post reset / replacement | $320 - $580 |
| Rail repair (per section) | $240 - $420 |
| Custom welding (fabrication) | $280 - $650+ |
| Gate roller / wheel replacement | $160 - $280 |
| Latch and lock replacement | $140 - $260 |
What moves the price? Depth to stable soil for post work. Whether the gate can be salvaged or needs section replacement. Access for the welding rig. Whether the operator mounting needs re-engineering. We tell you where your job sits in the range before we start. Estimates are free. Our $89 seasonal tune-up catches problems before they become emergency calls.
We Also Serve Cities Near Xenia
Our shop dispatches daily to Xenia and the surrounding communities: Beavercreek, Bellbrook, Fairborn, and Kettering. Each city has its own housing stock and its own gate problems, but the same Ironworks standard applies. Written 90-Day Done Right Promise. Upfront pricing. Background-checked, uniformed technicians. Call (833) 754-7503 and a live person will answer, wherever you are in Greene County.
Serving Xenia, OH - Our Local Coverage Area
We’re based in the Xenia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Xenia
Because the original post-1974 rebuild footings were set in disturbed fill soil with shallow depth, and resetting in the same hole does not solve the underlying frost-heave problem. We excavate to below the frost line, pour a concrete footing, and use a galvanized sleeve so the post stays plumb through Ohio’s freeze-thaw cycles. Call (833) 754-7503 for a free estimate on proper post replacement.
Many mechanical parts are still available, though control boards for 1980s operators are often obsolete. We carry adapter kits and safety upgrades that extend the service life of legacy mechanical frames without full replacement. If the operator is beyond reasonable repair, we stock modern FAAC and Linear units that fit existing mounting points. Call (833) 754-7503 and we will diagnose what makes sense.
Repair is usually the better value if the frame is structurally sound and the posts can be reset properly. Full replacement makes sense when the frame is racked beyond welding, the metal is perforated with rust, or you want to upgrade to modern automation. We give an honest assessment on every Xenia property, with upfront pricing for both paths. Call (833) 754-7503 for a free second opinion.
Yes. Xenia sits in one of Ohio’s most active tornado corridors, and the severe straight-line winds that precede and follow tornado events apply repeated shock loads to gate hinges, welds, and operator arms. This accelerates fatigue failure beyond what gates experience in milder inland markets. We inspect for wind damage on every service call and reinforce where needed. Call (833) 754-7503 after any severe storm to schedule a check.
Most opener replacements on older Xenia properties take two to four hours, assuming the gate frame and posts are square and stable. If frost heave has twisted the frame, we realign or reset the post first so the new operator does not fail prematurely. We complete most jobs in one visit. Call (833) 754-7503 for same-day scheduling and upfront pricing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Xenia and southwestern Ohio since 1984.