Fast, Reliable Gate Parts & Welding Across Weston
Gate parts and welding repair in Weston typically runs $180-$650 depending on the component, with most hinge, roller, and latch jobs completed in a single visit. Our Gate Parts & Welding team carries legacy inventory for the FAAC and Elite operators installed across Weston’s 1990s-era HOA communities, so we don’t leave you waiting on backordered parts while your entry gate sits open.
We’ve been serving South Florida for over 42 years, and Weston is familiar territory. The master-planned communities off Bonaventure Boulevard and the subdivisions near Griffin Road are built on the same flat terrain that traps rainwater around gate pedestals, and they’re gated with the same generation of hardware now hitting its end-of-life. We know which boards fail, which rollers seize, and which hinges crack before we pull into your community. Call (833) 754-7503 - a live person answers, day or night.
Why Ironworks Gate Co. Is Weston’s Preferred Gate Parts & Welding Company
Weston homeowners and HOA boards don’t call us for flashy trucks or lowball bids. They call because their neighbor’s property manager recommended us after we saved their community thousands on a retrofit, or because we fixed a gate at The Reserve at Weston last month and the board remembered we showed up when we said we would.
Our technicians are background-checked, uniformed, and trained on nine automation brands - including FAAC, BFT, and Viking, the names you’ll find on most Weston entry systems. The 90-Day Done Right Promise covers every weld, every part, every adjustment. No paperwork to file, no argument if something isn’t perfect. We come back and make it right.
Response time to Weston averages under 90 minutes during business hours, and our 24-hour live phone support means you’re never leaving a voicemail that disappears into a queue. That’s not a feature we added. It’s how we’ve operated since 1984.
Our Gate Parts & Welding Services in Weston
Hinge Replacement
Weston’s ornamental iron gates - the Mediterranean-style swing entries common in communities like Windmill Ranch Estates - carry massive hinges that corrode from the inside out. Year-round humidity penetrates the pin and barrel, and UV degradation cracks the powder coat that was supposed to protect them. A typical hinge replacement in Weston runs $220-$380 per gate, including removal of the seized hardware, surface prep, and installation of a marine-grade replacement. We match the original geometry so your gate doesn’t bind or sag.
Post Replacement
Gate posts in Weston take a beating from two directions: the chemical content of South Florida’s sandy soil accelerates corrosion at the concrete line, and the flat terrain means water pools rather than drains. A leaning or rotted post isn’t a weld-away fix - it needs extraction, proper footing, and reset. Post replacement in Weston typically costs $450-$850 depending on depth, gate weight, and whether we’re working around existing automation conduit. We coordinate with HOA maintenance crews when needed, and we don’t pour concrete until the post is plumb.
Rail Repair & Custom Welding
This is where our shop earns its keep. Broken pickets, cracked scrollwork, and separated frame joints on Weston’s wrought-iron and aluminum gates all start with a proper weld. Custom welding repair in Weston runs $180-$420 for most residential and HOA entry gates, with ornamental matching included. We serviced a FAAC 740 swing gate operator at the main entrance of The Reserve at Weston, where standing water from heavy rain had shorted the control board. Instead of a full replacement, we installed a legacy-compatible conversion kit and replaced the corroded gate rollers, saving the HOA thousands in retrofitting costs. The weld repair on the gate frame itself was done the same morning.
Gate Rollers & Track
Slide gates across Weston - particularly the heavy ornamental iron units at community entrances off Saddle Club Road and Weston Road - depend on rollers that seize when grit and moisture infiltrate the bearings. Grinding noise, slow travel, and motor strain are the symptoms. Roller replacement in Weston is $160-$290 per gate, and we stock sealed-bearing upgrades that last longer in wet conditions than the original hardware. If the track itself is worn or bent, we’ll straighten or replace it rather than forcing new rollers onto damaged steel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Weston
We carry parts and provide certified service on nine major gate-automation brands, but in Weston we see FAAC, BFT, and Viking most often - the hardware installed during the city’s 1990s-2000s building boom. FAAC 740 and 455D operators, BFT submersible control boards, and Viking access-control keypads are all in our inventory, including discontinued components that generalist contractors can’t source. When a legacy board fails and the manufacturer has stopped production, we evaluate conversion kits that preserve your gate mechanics while upgrading the brain. Most brand-specific parts jobs in Weston are completed same-day because we don’t have to order from a warehouse three states away.
Common Gate Parts & Welding Problems We See in Weston Homes
- Original FAAC 740 and Elite control boards failing citywide after 20-30 years. These boards were installed by the same developers across dozens of Weston communities, and they’re dying on a shared timeline. Replacement parts are discontinued, but we stock legacy-compatible conversion kits that restore function without a full system replacement.
- Standing water around gate pedestals from flat terrain and seasonal rain. Weston’s elevation profile means water doesn’t run off - it sits. Underground loop-detector conduits flood, control boards short, and galvanized hardware corrodes faster than spec sheets predict. We elevate vulnerable components and use sealed enclosures where possible.
- Ornamental iron hinges and powder-coat finishes deteriorating from humidity and UV. The same climate that draws retirees destroys gate coatings. Hinge pins gall, barrels crack, and the gate starts dropping or binding. Custom welding and marine-grade replacement hardware solve it properly.
- Gate rollers seizing in slide-gate track. Sand, rain, and time turn roller bearings into grinding paste. The motor works harder, draws more amps, and eventually burns out. Replacing rollers before the motor fails is the square deal - and it costs a fraction of an opener replacement.
Pricing for Gate Parts & Welding in Weston, FL
| Service | Typical Range in Weston |
|---|---|
| Hinge replacement (per gate) | $220 - $380 |
| Gate roller replacement | $160 - $290 |
| Latch & lock assembly | $140 - $260 |
| Custom welding / rail repair | $180 - $420 |
| Post replacement | $450 - $850 |
| Legacy control board conversion kit | $380 - $620 |
These are real numbers for Weston’s market, not teaser rates that balloon on the invoice. What moves the needle: gate material (wrought iron vs. aluminum), accessibility for welding equipment, whether the HOA requires after-hours work to avoid blocking resident traffic, and whether we’re matching discontinued hardware or upgrading to current-generation components. We settle on an upfront price before turning a single bolt. No surprises on the bill. Call (833) 754-7503 for a free estimate - we’ll look at your gate, identify the exact part or weld needed, and give you a number you can plan around.
Active offers: $50 off any repair over $250. Free second opinion on any written estimate. $89 seasonal tune-up. Senior and veteran discount of 5%, always.
We Also Serve Cities Near Weston
Our service radius covers communities throughout Broward County and into southern Palm Beach, including Weston itself plus Cochituate, Wayland, Waltham, and Lincoln. Whether you’re managing a single-family estate gate or a multi-entry HOA community, we bring the same stocked inventory and same-day capability.
Serving Weston, FL - Our Local Coverage Area
We’re based in the Weston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Weston
Yes - we stock legacy-compatible conversion kits for the FAAC 740 and can typically restore operation without waiting for discontinued factory parts. The 740 was installed across dozens of Weston communities in the 1990s, so we’ve handled this exact failure many times. We’ll diagnose whether the board, loop detector, or both took water damage, quote the repair upfront, and complete most jobs in one visit. Call (833) 754-7503 - estimates are free.
Absolutely. We custom-weld hinge mounts or install marine-grade replacement hinges matched to your gate’s original geometry, preserving the ornamental ironwork and frame. Full gate replacement is rarely necessary for hinge failure. A typical hinge repair or replacement in Weston runs $220-$380. We’ll inspect for secondary stress cracks while we’re there - no charge for the look.
We do - and we understand Weston’s HOA-governed structure. We’ll provide a written estimate with line-item detail suitable for board review, coordinate scheduling with your property manager to minimize resident disruption, and we’re happy to meet warranty or insurance documentation requirements. No pressure tactics. The estimate is valid for 30 days.
Replace the rollers first - seized rollers force the opener to overwork, and replacing the motor without fixing the mechanical binding wastes money. Roller replacement in Weston is $160-$290 and usually solves both the noise and the speed issue. If the opener still struggles after new rollers, we’ll evaluate whether it needs adjustment or replacement. Call (833) 754-7503 and we’ll diagnose it properly.
We stock replacement latches, locks, and strike plates compatible with Viking, Ghost Controls, and seven other major brands - including components the manufacturers no longer produce. A typical latch and lock replacement in Weston runs $140-$260. We’ll match your existing mounting pattern or fabricate a custom weld-on solution if the post has shifted or corroded. Call for a free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Weston and South Florida since 1984.