Gate Parts & Welding in Tamiami, FL - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Parts & Welding Across Tamiami

Gate parts and welding repair in Tamiami typically runs $180-$2,800 depending on whether you need a simple hinge weld or a full post footing replacement, and most jobs are completed in a single visit with upfront pricing settled before we start. Our Gate Parts & Welding team knows Tamiami’s gates inside and out - the 30-to-40-year-old ornamental iron swing gates on SW 137th Avenue, the sliding estate gates near the Everglades buffer, and the courtyard pedestrian gates tucked behind CBS stucco walls throughout 33184. We’ve been answering calls live, 24 hours a day, 7 days a week since 1984, and we carry parts and welding equipment for nine automation brands so your gate closes the way it should. Call (833) 754-7503 for a free estimate - we’ll give you a square deal, no surprises on the bill.

Call (833) 754-7503

Why Ironworks Gate Co. Is Tamiami’s Preferred Gate Parts & Welding Company

We’ve been serving Miami-Dade County for over 42 years, and Tamiami’s concentration of aging ornamental iron gates has made it one of our most called-on neighborhoods. Homeowners here don’t want a handyman who guesses - they want a company that knows why a 1989 Viking operator fails differently than a 2015 LiftMaster, and why a leaning post near SW 147th Avenue probably needs a new footing, not a coat of paint.

Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. We stock parts for Viking, Ghost Controls, DoorKing, and Elite operators, plus raw steel and welding gear for custom hinge and rail fabrication. Most repairs are done same-day.

Every job carries our 90-Day Done Right Promise - the Keystone Standard. Written, no paperwork, no arguing. If it’s not right, we come back and make it right. No exceptions.

Our Gate Parts & Welding Services in Tamiami

Hinge Replacement

The galvanized hinge pins on Tamiami’s 1980s and 1990s ornamental iron gates corrode and snap from the unique humidity here - freshwater saturation off the Everglades mixing with salt-laden coastal air oxidizes bare metal in months, not years. We fabricate custom replacement pins by welding when off-the-shelf sizes don’t match the original forged hardware. A typical hinge replacement or custom weld in Tamiami runs $180-$450 per gate.

Post Replacement

This is where Tamiami’s geography hits hardest. On streets closest to the Everglades buffer, near SW 147th Avenue and westward, the regional water table is so shallow that buried concrete footings are perpetually saturated by lime-rich groundwater. Posts slowly heave, lean, or crack their footings - a structural failure that looks like simple corrosion but actually requires footing replacement, not surface treatment. We cut out the old concrete, pour deeper reinforced footings above the water table, and reset or replace the post. Post and footing replacement in Tamiami typically runs $1,200-$2,800.

Rail Repair & Custom Welding

Ornamental iron rails on Tamiami’s courtyard gates and driveway enclosures sag, crack, or pull away from stucco columns after decades of thermal cycling and humidity swelling. We weld structural repairs, fabricate replacement scrollwork and pickets to match existing patterns, and grind finishes smooth so the repair disappears into the original gate. Custom welding and rail repair in Tamiami generally runs $350-$950 depending on access and pattern complexity.

Gate Rollers & Track Service

Sliding gates along SW 152nd Street and near FIU’s western edge rely on bottom-mounted rollers and overhead track that corrodes from standing water after afternoon thunderstorms. We replace seized or worn rollers with sealed-bearing hardware rated for wet environments, realign track, and weld mounting brackets when the original attachment points have fatigued. Roller and track service in Tamiami typically runs $280-$650.

Trusted Brands We Service in Tamiami

We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Tamiami homeowners, this means the correct fix on the first visit - whether your 1992 Viking operator needs a discontinued control board replaced with a modern retrofit, or your Ghost Controls system needs a new limit switch. We stock common parts locally and fabricate what we can’t buy, so you’re not waiting weeks for a cross-country shipment while your gate hangs open.

Common Gate Parts & Welding Problems We See in Tamiami Homes

• Original 1980s-90s openers with obsolete control boards. BFT and Viking operators from Tamiami’s build-out era have discontinued parts. We retrofit modern operators - often LiftMaster or DoorKing - using existing gate frames, saving the cost of full replacement.
• Galvanized hinge pins corroded to failure. Tamiami’s freshwater-humidity-plus-salt air combination destroys bare hinge pins in under two years. We weld custom replacement pins sized to the original forged knuckles.
• Gate posts heaving from saturated footings. Near SW 147th Avenue and westward, lime-rich groundwater keeps footings wet year-round. Posts tilt, gates bind, and homeowners mistake it for rust. The fix is footing replacement, not paint.
• Sliding gate rollers seized from stormwater submersion. Afternoon thunderstorms leave low-mounted rollers submerged. We upgrade to sealed-bearing hardware and raise mounting points where possible.

Pricing for Gate Parts & Welding in Tamiami, FL

We Also Serve Cities Near Tamiami

Our shop dispatches daily to Tamiami and surrounding communities - Sweetwater, University Park, Fountainebleau, and Olympia Heights. The same 90-Day Done Right Promise, the same live-answer phone, the same upfront pricing. We’ll be there when we say.

FAQs - Gate Parts & Welding in Tamiami