Fast, Reliable Gate Parts & Welding Across Southglenn
Gate parts and welding repair in Southglenn typically runs $180-$650 depending on whether you’re looking at hinge work, post reset, or custom fabrication, and most jobs are completed in a single visit with upfront pricing settled before we start. We answer calls live 24 hours a day at (833) 754-7503, and our technicians are usually on-site in Southglenn within the same day.
We’ve been working the 80122 zip and surrounding Arapahoe County subdivisions for over 42 years. The homes here, mostly built between 1965 and 1990, carry a specific set of gate problems you don’t see in newer developments. Shallow post footings from the 1970s construction boom. Cedar gates that have rotted through at the base after decades of ground contact. Wrought iron driveway gates now 40 years old with seized latches and pitted rails. Our Gate Parts & Welding team knows this housing stock because we’ve repaired thousands of them. We bring the welder, the parts inventory, and the automation expertise on every truck, so we don’t make two trips.
Why Ironworks Gate Co. Is Southglenn’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has served the south Denver corridor since 1984. In Southglenn specifically, we’ve built our reputation on showing up when we say we will and fixing the actual problem, not the symptom. A gate that won’t latch in April isn’t a latch problem. It’s almost always a post that heaved over winter. We diagnose that correctly on the first visit.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands including Viking, Ghost Controls, and DoorKing. That means whether your gate needs a new hinge, a welded rail repair, or a complete opener swap to a commercial-grade unit, one technician handles it. No subcontracting. No waiting for a second crew.
Every job carries our 90-Day Done Right Promise, the Keystone Standard. Written. No paperwork to file. No argument. If it isn’t right, we come back and make it right. That promise has been in force for over four decades, and it applies to every weld, every post set, every opener install in Southglenn.
We also keep our standing offers active for Southglenn homeowners: $50 off any repair over $250, a free second opinion on any written estimate you bring us, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Our Gate Parts & Welding Services in Southglenn
Post Replacement
This is the most common major repair we do in Southglenn, and it’s almost always caused by the same thing. The 1970s-era subdivisions here, from the streets near Homestead Park to the ranch homes off South Broadway, frequently have gate post footings that don’t reach Colorado’s recommended 36-inch frost depth. Bentonite-heavy clay soils expand and contract aggressively through the Front Range freeze-thaw cycle. By April, a post that was plumb in October has canted two inches. The gate drags. The latch misses. The homeowner adjusts the latch. It works for a month. Then it doesn’t.
We replaced the entire heavy-duty gate post set on a ranch home near Homestead Park after the original shallow footings shifted over winter, canting a Dual Swing gate opener. The homeowner had tried four latch adjustments himself; we reset the posts to frost depth and swapped the opener to a LiftMaster SL3000 for the longer driveway. A typical post replacement in Southglenn runs $380-$650 depending on whether we’re resetting one post or a paired set, and whether we need to extend the footing to 36 inches.
Custom Welding
Southglenn’s ornamental iron gates from the 1970s and 1980s were built to last, but 40 years of Front Range UV, hail, and temperature swings of 40-50°F in a single day will crack welds and rust through thin spots. We don’t replace what we can repair. Our mobile welding rig lets us fix broken gate frames, reattach separated scrollwork, and reinforce stress points on-site. For vinyl gates damaged by Southglenn’s high-hail-frequency summers, we fabricate custom aluminum reinforcement brackets that outlast the original material. Custom welding in Southglenn typically ranges from $180 for a simple rail repair to $520 for extensive frame reinforcement or ornamental restoration.
Hinge Replacement
Cedar privacy gates are standard issue on Southglenn’s ranch and tri-level homes, and the strap hinges on these gates fail predictably. Moisture wicks up through the end grain, the wood swells and softens, and the hinge bolts work loose. By the time the gate is sagging, the hinge itself is often bent from carrying a load it wasn’t designed for, and the wood behind it is punky. We stock heavy-duty galvanized hinges rated for the actual weight of these older, often waterlogged gates, and we know to check the post plumb before hanging anything new. Hinge replacement in Southglenn runs $140-$280 for standard residential gates.
Rail Repair & Gate Rollers
Sliding gates on longer Southglenn driveways, common on the area’s larger lots, depend on level track and free-rolling gate rollers. Clay soil heave throws track out of alignment. Rollers seize from grit and lack of maintenance. The gate motor strains, overheats, and fails. We level track, replace rollers with sealed-bearing units rated for Colorado’s temperature extremes, and adjust the operator tension to match. Rail and roller work in Southglenn typically runs $220-$420.
Latch & Lock
A seized latch on a 1980s ornamental iron gate is almost a rite of passage for Southglenn homeowners. Corrosion, misalignment from post heave, and decades of grit accumulation freeze these mechanisms solid. We don’t just spray lubricant and hope. We disassemble, clean, replace worn pawls and springs, and realign the strike plate to the actual position of the gate, not where it used to be. If the lock mechanism is beyond salvage, we source drop-in replacements that match the existing mounting pattern. Latch and lock repair in Southglenn runs $120-$240; full replacement with a modern keyed or keypad entry system runs $280-$480.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southglenn
We carry parts and factory training for nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Southglenn’s heavier residential and light-commercial gates, we most commonly install Viking and DoorKing operators, which handle the longer, steeper driveways and larger gate panels common in the area’s acreage properties. Our trucks are stocked with the failure-prone components for these brands, so a motor replacement or control board swap doesn’t wait on shipping. If your gate uses a brand we don’t stock, we’ll tell you before we drive out. No surprises on the bill.
Common Gate Parts & Welding Problems We See in Southglenn Homes
- Post heave from shallow 1970s footings. The defining repair driver in 80122. A gate that latched cleanly in October drags on the concrete apron by April. The fix is never a latch adjustment. It’s a post reset to 36-inch frost depth, then alignment, then hardware.
- Oversized wrought iron gates on under-rated openers. Southglenn’s 16-foot ornamental iron driveway gates often exceed the duty cycle of residential-grade operators. The motor overheats, gears strip, and the homeowner assumes the gate is broken. We upgrade to commercial-grade LiftMaster or FAAC units sized for the actual load.
- Vinyl slat delamination from Front Range UV and hail. At 5,700 feet, Southglenn’s sun degrades vinyl faster than lower-elevation markets. Summer hailstorms crack slats and pit thin aluminum panels. We weld aluminum reinforcement frames or fabricate replacement panels that won’t degrade the same way.
- Cedar gate rot at the hinge and latch points. Decades of ground contact and moisture wicking have softened the end grain on countless Southglenn cedar gates. Hinge bolts pull through. Latch strikes won’t hold. We sister in treated blocking or recommend full panel replacement when the rot is structural.
Pricing for Gate Parts & Welding in Southglenn, CO
Here’s what we charge for the work we do most often in Southglenn. These are actual ranges, not bait-and-switch estimates. Your exact price depends on gate size, material, and whether we discover the underlying problem we expect or something worse. We give you the full price before we start. No surprises on the bill.
| Service | Typical Range in Southglenn |
|---|---|
| Hinge Replacement (standard residential) | $140 - $280 |
| Latch & Lock Repair | $120 - $240 |
| Latch & Lock Replacement (with keypad) | $280 - $480 |
| Rail Repair / Gate Roller Replacement | $220 - $420 |
| Custom Welding (minor to extensive) | $180 - $520 |
| Post Replacement (single, standard depth) | $380 - $520 |
| Post Replacement (paired set, to 36″ frost depth) | $520 - $650 |
| Seasonal Tune-Up | $89 |
These prices are current for the Southglenn market as of 2025. Material costs for steel and aluminum fluctuate, but we lock your price when you approve the work. Call (833) 754-7503 for a free estimate. We’ll ask a few questions about your gate, give you a ballpark over the phone, and confirm in person.
We Also Serve Cities Near Southglenn
Our shop dispatches daily to Southglenn and the surrounding south Denver suburbs: Highlands Ranch, Castlewood, Centennial, and Englewood. The same technician who knows the clay soils and shallow footings of 80122 understands the conditions in these neighboring communities. Same-day response, same upfront pricing, same 90-Day Done Right Promise.
Serving Southglenn, CO - Our Local Coverage Area
We’re based in the Southglenn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Southglenn
Your gate post heaved over winter. Southglenn’s 80122 subdivisions sit on bentonite-heavy clay soils that expand and contract through the Front Range’s aggressive freeze-thaw cycles, and the original 1970s footings often don’t reach Colorado’s 36-inch frost depth. The post tilts. The gate frame goes out of square. No amount of latch adjustment fixes a post that isn’t plumb. We reset posts to proper depth, then realign the gate and hardware so it stays right. Call (833) 754-7503 for a free estimate.
Probably not for long. A 16-foot wrought iron panel often exceeds the duty rating of residential-grade operators, especially on Southglenn’s longer driveways where the gate cycles more frequently. We’ve replaced too many stripped gears and burned-out motors that were doing work they weren’t built for. We typically upgrade to commercial-grade units from LiftMaster or FAAC, sized to the actual gate weight and cycle demand. The upfront cost is higher. The replacement cost of a second failed residential opener is higher still. Call for a load assessment.
You can’t prevent hail, but you can build for it. Southglenn sits in a high-hail-frequency corridor, and summer storms routinely crack vinyl slats and pit thin aluminum. We fabricate custom welded aluminum reinforcement frames that distribute impact stress and replace vulnerable vinyl panels with thicker, UV-stabilized materials or powder-coated aluminum that won’t crack. An $89 seasonal tune-up lets us inspect and reinforce before storm season. Call to schedule.
A heavy-duty galvanized strap hinge with bolts through solid blocking, not just the end grain. The rot at the base of Southglenn’s cedar gates is usually moisture wicking up through unchecked end grain, softened by decades of ground contact. We sister in treated blocking behind the hinge mount, use through-bolts with washers instead of screws that pull out of punky wood, and sometimes raise the gate slightly on a composite shoe to break ground contact. Hinge replacement with proper blocking runs $140-$280. Call for an inspection.
Yes, in most cases. We disassemble the mechanism, clean corrosion and grit, replace worn internal components, and realign the strike to the gate’s actual position after any post movement. If the casting is cracked or the mechanism is obsolete, we source modern replacements that mount to the same bolt pattern without modifying your gate frame. Latch repair runs $120-$240; full replacement with keyed or keypad entry runs $280-$480. Call (833) 754-7503 for a free estimate.
Ready to get your gate working right? Call Ironworks Gate Co. at (833) 754-7503 for a free estimate. A live person will answer, 24 hours a day, 7 days a week. We’ll give you an honest price, show up when we say, and stand behind the work with our written 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southglenn and the south Denver corridor since 1984.