Fast, Reliable Gate Parts & Welding Across Moore
Gate parts and welding in Moore, OK typically runs $180-$650 depending on whether you need a hinge swap, post reset, or full custom fabrication, and most of our calls in Moore are handled same-day or next-day. We keep heavy-duty hinges, welded brace plates, and replacement posts stocked for the acreage properties and rebuilt-home neighborhoods that make up so much of this market. If your gate is dragging, sagging, or twisted from last spring’s straight-line winds, call us at (833) 754-7503. A live person answers, 24 hours a day, 7 days a week.
We’ve been driving out to Moore from our Los Angeles headquarters for years now, and we know the difference between a quick suburban fix and the heavy-duty work this area demands. Moore’s rural properties south of town, the acreage lots near Newcastle Road, and the rebuilt neighborhoods around Plaza Towers and Heatherwood all need something sturdier than what the 2013 rebuild contractors installed in bulk. Our Gate Parts & Welding team brings the welding rig, the parts inventory, and the automation expertise to handle it in one trip. That’s the point. You shouldn’t need us back next month because the hinge was undersized or the post wasn’t set deep enough for Oklahoma clay.
Why Ironworks Gate Co. Is Moore’s Preferred Gate Parts & Welding Company
Moore homeowners remember the contractors who showed up after 2013 and disappeared just as fast. We’re still here. Ironworks Gate Co. has been serving local communities for over 42 years, founded in 1984, and we plan to be around for another forty. That matters when you’re looking at a welded repair that should last decades, not seasons.
Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. We work in your home the way we’d work in our own mother’s.
Most jobs are completed in a single visit. We settle on upfront pricing before turning a single bolt. No surprises on the bill. And every repair, every weld, every post replacement is backed by our 90-Day Done Right Promise - the Keystone Standard. Written guarantee, no paperwork, no arguing, no exceptions.
When you call (833) 754-7503, a live person answers. Not a voicemail tree. Not an answering service. Someone who can dispatch a technician to Moore today.
Our Gate Parts & Welding Services in Moore
Hinge Replacement
The hinges we find in Moore are often the same no-weld, bolt-on assemblies that contractors bought by the pallet in 2014. They weren’t built for Oklahoma wind load or the weight of a solid cedar gate. We replace them with heavy-duty, welded steel hinges that are gusseted and braced for the actual forces they’ll see. In the Heatherwood addition and near Plaza Towers Elementary, we’ve replaced dozens of these in matched sets so the gate hangs square and stays square. A typical hinge replacement in Moore runs $180-$340 for a standard driveway gate, more if the mounting surface needs welding repair.
Post Replacement
Moore’s heavy clay soil is brutal on gate posts. It swells when wet, shrinks in drought, and heaves posts out of plumb season after season. Add the straight-line winds that rack frames sideways, and you get posts that lean, twist, or rot at the ground line. We pull the old post, dig to proper depth for Oklahoma frost line and clay expansion, and set a steel or treated post with welded base plates and concrete that won’t walk. Post replacement in Moore typically costs $280-$520 depending on depth, diameter, and whether we need to weld a custom cap or brace. For the acreage properties with longer drives and heavier gates, we spec larger diameters than the 2013 rebuild standard.
Rail Repair & Custom Welding
Wind-driven racking twists gate frames out of square. Once the diagonal bracing is compromised, the gate starts sagging, binding, or tearing itself apart at the corners. We square the frame, weld in new rail sections or custom diagonal braces, and grind the joints clean so the repair doesn’t look like a repair. For Moore’s acreage shops and detached workshops, we fabricate heavier-duty frames from scratch - 2×2 or 2×3 steel with gusseted corners that match the gate’s actual use. Custom welding and rail repair in Moore generally runs $320-$650 based on material, access, and whether we’re matching an existing design.
Gate Rollers, Latches & Locks
Rollers on slide gates take a beating from Oklahoma’s temperature swings and the grit that blows in from open fields. We stock sealed-bearing rollers in multiple sizes, and we weld the mounting brackets when the original tabs have cracked. Latches and locks fail when the gate sags out of alignment - fixing the latch without fixing the post or hinge is a temporary bandage. We address the root cause. Roller and latch service in Moore typically runs $150-$280.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Moore
We carry parts and have factory training on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Moore customers, that means we don’t have to order a Viking control board or a Ghost Controls actuator and make you wait a week. Our trucks are stocked with the common failure parts for the brands we see most in this area, including LiftMaster slide-gate hinge assemblies and Elite swing-gate operator arms. When we show up to Moore, we’re equipped to finish the job. Not start it and come back.
Common Gate Parts & Welding Problems We See in Moore Homes
- Synchronized hinge failure in post-2013 rebuild neighborhoods. Contractors who worked the 2013 rebuild rush used similar hardware from the same regional suppliers in bulk. We find entire cul-de-sacs where every gate has the same failing no-weld hinge or the same undersized post diameter. It’s a neighborhood-wide parts pattern, not individual wear.
- Wind-driven racking that twists hinge mounts out of square. Moore’s straight-line wind events, even below tornado strength, rack gate frames and strip bolt holes. Simple bolt-on hinge replacement won’t hold. The mount needs to be cut, squared, and re-welded.
- Clay soil heave causing seasonal binding and drag. Oklahoma’s wet-to-drought swings make heavy clay expand and contract aggressively. Posts shift. Gates that swung free in April drag in August. The fix is deeper setting, wider base plates, and sometimes welded skid plates at the gate bottom.
- Undersized contractor-grade posts from the rebuild era. Speed mattered in 2013-2015. Many posts were minimum-spec for the gate weight they carry. Ten years later, the sag is visible and the latch won’t meet the strike plate. We replace with proper diameter and depth.
Pricing for Gate Parts & Welding in Moore, OK
| Service | Typical Range in Moore |
|---|---|
| Hinge Replacement (standard) | $180 - $340 |
| Post Replacement | $280 - $520 |
| Rail Repair / Custom Welding | $320 - $650 |
| Gate Rollers & Hardware | $150 - $280 |
| Latch & Lock Alignment / Replacement | $120 - $240 |
These are the ranges we see for actual Moore properties - acreage gates with longer spans, rebuilt homes with contractor-grade hardware, and the occasional custom fabrication for shop or barn gates. What moves the needle: gate size and weight, whether the mounting surface needs weld repair, how deep we need to set a post to beat the clay, and whether we’re matching existing ornamental work. We settle on price before we start. You’ll know the full cost before a single bolt turns. Estimates are free. Call (833) 754-7503 to schedule.
Active offers for Moore customers: $50 Off Any Repair Over $250. Free Second Opinion on Any Written Estimate. $89 Seasonal Tune-Up. 5% Senior and Veteran discount, always.
We Also Serve Cities Near Moore
Our service radius covers Del City, Norman, Midwest City, and Newcastle - the full Oklahoma City metro south and east. If you’re on acreage outside Moore city limits or your property straddles the Cleveland-McClain county line, we still come equipped for heavy-duty, one-trip repairs. Same live-answer phone, same upfront pricing, same 90-Day Done Right Promise.
Serving Moore, OK - Our Local Coverage Area
We’re based in the Moore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Moore
Yes. We fabricate and weld heavy-duty replacement hinges that mount to your existing frame, provided the frame itself isn’t rotted or cracked beyond repair. In Moore’s post-2013 neighborhoods, we’ve replaced hundreds of these bulk-contractor hinges with welded steel assemblies that outlast the originals. Typical cost is $180-$340 per gate. Call (833) 754-7503 for a free look - we’ll tell you if the frame can be saved.
We pull and reset if the post is sound but heaved; we replace if it’s undersized, rotted, or twisted. Welding a brace to a leaning post is usually a temporary fix that fails when the next storm hits. For Moore’s clay soil and wind exposure, we set new posts 36-42 inches deep with welded base plates and concrete. Post replacement runs $280-$520. We’ll give you a straight answer on which approach makes sense for your gate.
Yes. We fabricate and weld custom roller tracks, heavier-duty frames, and skid plates for Moore’s acreage properties and detached workshops. We bring the welding rig to you, measure on-site, and build to the gate’s actual weight and use rather than a catalog spec. Custom welding starts around $320 and scales with material and complexity. One trip. Done right.
The opener’s force settings were calibrated to the old, binding rollers. New, free-rolling wheels changed the gate’s travel resistance, and the opener’s safety sensors or force limits are now misreading normal operation as an obstruction. We adjust the operator settings and verify the safety entrapment functions after any roller or hinge work. This is included when we do the roller replacement, or we can service it separately. Call (833) 754-7503 - we carry LiftMaster parts and can usually fix it same-day.
Yes. We stock common Viking control boards, limit switches, and Ghost Controls actuator assemblies on our Moore service vehicles. For less common parts, our supplier network typically delivers next-day to the Oklahoma City metro. We won’t start a job we can’t finish. Call (833) 754-7503 to confirm availability for your specific model - have the part number ready if you have it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Moore and surrounding communities since 1984.