Fast, Reliable Gate Parts & Welding Across Lanham
Gate parts and welding repair in Lanham typically runs $180-$650 depending on whether you need hinge replacement, post resetting, or custom rail fabrication, and most jobs are completed in a single visit with upfront pricing settled before we start. We’re familiar with the specific gate problems Lanham homeowners face: the 1960s and 1970s perimeter gates in neighborhoods like Woodland Hills and Lanham-Seabrook that were built when much of Prince George’s County was expanding for DC-area federal workers. Those original posts, set shallow in heavy clay without proper footings, are now failing after fifty-plus winters of freeze-thaw heave. If your gate is sagging, scraping, or refusing to latch, call (833) 754-7503. A live person answers, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Lanham’s Preferred Gate Parts & Welding Company
We’ve been serving communities like Lanham for over 42 years, since 1984, and we plan to be here for another forty. That matters when you’re deciding who to trust with a gate that may be older than the technician working on it. Our Gate Parts & Welding in Lanham work is backed by the 90-Day Done Right Promise, known internally as the Keystone Standard: written, no paperwork, no arguing. If it’s not right, we come back and make it right.
Lanham customers tell us they appreciate that we answer the phone live, day or night, not a voicemail tree or answering service queue. Our technicians are background-checked, uniformed, and guided by our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
Most of our Lanham calls come from ZIP 20706, where the post-WWII ranchers and cape cods along corridors like Greenbelt Road (MD-193) still carry their original chain-link fencing and manual swing gates. We also service the newer townhome clusters from the 1990s and 2000s with automated ornamental gates. Either way, we’re typically on-site within hours, not days.
Our Gate Parts & Welding Services in Lanham
Post Replacement
Post replacement is our most common call in Lanham, and for good reason. The original 1960s-70s perimeter gate posts in neighborhoods throughout ZIP 20706 were typically set only 18-24 inches deep in heavy clay soil, without concrete bell footings or rebar. After fifty years of Prince George’s County freeze-thaw cycles - usually 20-30 freeze events each winter - those posts have racked out of plumb. The gate frame no longer clears the ground on one side. The latch misses the strike plate by inches.
We recently replaced rusted hinges and repinned a sagging chain-link swing gate in Lanham’s Woodland Hills subdivision (ZIP 20706) whose original post had heaved 2 inches out of plumb. After digging out the old post and repouring a 36-inch-deep concrete footing with rebar, the gate swung freely and latched correctly - a fix that should last another 50 years. A typical post replacement in Lanham runs $350-$650, including removal, new 4×4 or 6×6 steel post, concrete footing to proper depth, and rehang.
Custom Welding
Lanham’s humidity is hard on steel. Summer relative humidity routinely climbs above 70%, and gates facing east toward the Patuxent River watershed catch afternoon moisture that accelerates rust on exposed hinges, pintles, and welded frames. We’ve seen original galvanized chain-link gate frames rust through at the bottom rail where standing water collects after heavy rains.
Our custom welding service fabricates replacement bottom bars, reinforces failing corners, and builds new steel elements to match existing gates. We bring a mobile welding rig to your Lanham property, so the work is done on-site, not hauled to a distant shop. Custom welding in Lanham typically ranges from $180-$450 for repair work, or $600-$1,200 for full frame fabrication, depending on gate size and steel gauge.
Hinge Replacement
Rusted or seized hinges are the silent killer of otherwise sound gates in Lanham. The same humidity that attacks welded frames corrodes hinges and pintles, particularly on manual swing gates that don’t get the regular exercise of automated systems. A gate that takes two hands to drag open is usually telling you the hinges are failing, not that the gate is heavy.
We stock heavy-duty ball-bearing hinges, adjustable J-bolts, and custom pintle sets sized for everything from light residential chain-link to estate-grade ornamental iron. Hinge replacement in Lanham runs $180-$320 for a standard pair, including removal of corroded hardware and proper alignment.
Rail Repair
Gate rails - the horizontal members that keep a swing gate square - take the stress when posts shift or hinges bind. In Lanham’s older subdivisions, we’ve found rails that have twisted, separated at welded joints, or corroded where they meet the post. A rail repair typically involves cutting out the damaged section, fabricating a replacement piece, and welding it back with proper alignment so the gate doesn’t rack further. Rail repair in Lanham costs $220-$400 depending on length and whether both top and bottom rails need attention.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lanham
Our Gate Parts & Welding technicians are trained and equipped on nine major gate-automation brands, including FAAC, BFT, Linear, and Viking. For Lanham homeowners with newer automated installations, that means the correct fix on the first visit, whatever operator is on your driveway. We carry common wear parts locally - gears, control boards, limit switches, safety loops - so you’re not waiting on freight from a warehouse three states away. For the 1970s-era FAAC 400 hydraulic operators still running in some Lanham homes, we stock seal kits and can source replacement rams when rebuilding makes more sense than replacement.
Common Gate Parts & Welding Problems We See in Lanham Homes
- Frozen or broken operator gearbox from moisture wicking. LiftMaster and similar operators with low-mounted control boxes sit close to Lanham’s clay soil, where groundwater and condensation collect. We see gearboxes seized with corrosion, particularly on east-facing installations, and replace the unit or relocate the control box above grade.
- Gate roller binding from uneven track settlement. On sliding gates in Lanham’s older subdivisions, years of post heave have thrown the track out of level. The roller binds, the motor strains, and eventually something strips. We realign or replace track, reset posts to proper depth, and install rollers rated for the actual gate weight.
- Rust-through on original galvanized chain-link frames. The bottom rail of a 1960s chain-link gate sits in the wet zone, and after fifty Lanham winters the galvanizing is gone. We cut out the rotted section and custom-weld new steel, or fabricate a complete replacement frame if the damage is too extensive.
- Misaligned latches from post heave. Every spring we get calls from Lanham homeowners whose gate worked fine in October and won’t latch in April. The post moved. Sometimes we can reposition the latch and strike; often the post needs resetting to proper depth with a concrete footing that won’t heave again.
Pricing for Gate Parts & Welding in Lanham, MD
We’re straightforward about costs. Here’s what typical gate parts and welding work runs in the Lanham market:
| Service | Typical Range in Lanham |
|---|---|
| Hinge replacement (pair) | $180 - $320 |
| Post replacement with concrete footing | $350 - $650 |
| Rail repair (single rail) | $220 - $400 |
| Custom welding (on-site repair) | $180 - $450 |
| Custom frame fabrication | $600 - $1,200 |
| Latch and lock replacement | $140 - $280 |
| Seasonal tune-up | $89 |
What moves the needle within these ranges: gate size and weight, whether the post is embedded in concrete that must be broken out, how far the technician needs to dig through Lanham’s heavy clay, and whether custom fabrication is needed. We settle the exact price before touching a bolt. No surprises on the bill. Active offers for Lanham customers: $50 off any repair over $250, free second opinion on any written estimate, our standing $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (833) 754-7503 for your free estimate.
We Also Serve Cities Near Lanham
Our service area covers Bowie, Goddard, Lanham-Seabrook, and New Carrollton with the same-day response and upfront pricing we bring to Lanham. Whether you’re in a 1970s rancher off Greenbelt Road or a newer townhome community near the Beltway, the same 90-Day Done Right Promise applies.
Serving Lanham, MD - Our Local Coverage Area
We’re based in the Lanham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lanham
Your posts are almost certainly set too shallow in Lanham’s heavy clay soil, likely 18-24 inches deep without a proper concrete bell footing, which was standard construction in the 1960s and 1970s. Each winter’s freeze-thaw cycle - Prince George’s County typically sees 20-30 freeze events - causes the clay to expand and contract, gradually pushing the post out of vertical. The fix is removing the old post and setting a new one 36 inches deep in a concrete footing with rebar, which we do regularly in Lanham subdivisions like Woodland Hills. Call (833) 754-7503 for a free estimate on permanent post replacement.
Yes, we service legacy FAAC 400 units and stock seal kits and replacement rams for common failure points. A leaking FAAC 400 usually needs new piston seals and possibly a ram rebuild; we evaluate whether rebuilding makes sense versus replacing with a modern operator. Many Lanham homeowners prefer to keep their original hardware running, and we’re equipped to do that. Call (833) 754-7503 to schedule a diagnostic - estimates are free.
Almost never. A manual swing gate that won’t latch usually has a post that has shifted, hinges that have sagged, or a latch that has corroded out of alignment. We can often reposition the latch and strike, replace worn hinges, or reset the post for a fraction of replacement cost. In Lanham’s 20706 ZIP, where original gates are often solid steel or heavy chain-link built to last, repair is typically the smarter money. Call (833) 754-7503 and we’ll tell you honestly whether your gate is worth fixing.
We stock control boards, limit switches, gear assemblies, and safety devices for Ghost Controls operators, and our technicians are trained on their specific programming and troubleshooting protocols. For Lanham homeowners with newer Ghost Controls installations, that means same-day repair without waiting for parts to ship. If your operator is failing, call (833) 754-7503 - we’ll diagnose it on the first visit and fix it if the parts are on the truck.
A new gate post in Lanham’s heavy clay soil should be set 36 inches deep minimum, in a concrete footing with rebar reinforcement and a flared bell base to resist uplift from freeze-thaw expansion. The original 18-24 inch depths common in 1960s-70s construction are why so many Lanham gates are failing now. We dig to proper depth, pour concrete to grade, and allow full cure before hanging the gate. Call (833) 754-7503 for a free estimate on post replacement done to last.
Ready to get your Lanham gate working right? Call (833) 754-7503 now. A live person will answer, 24 hours a day, 7 days a week. We’ll give you a free estimate, settle the price upfront, and back every weld and every part with our written 90-Day Done Right Promise. Done right - and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lanham and surrounding communities since 1984.