Fast, Reliable Gate Parts & Welding Across Crafton
Gate parts and welding repair in Crafton typically runs $180-$650 depending on the component, and most jobs are completed in a single visit with upfront pricing settled before we start. We’re Ironworks Gate Co., and we’ve been fabricating and fitting gate hardware since 1984. Our Gate Parts & Welding team knows Crafton’s hillside streets and creek-valley conditions well. From Kennedy Avenue to the Carnegie border, we carry the hinges, rollers, and welding equipment to fix gates on the spot. Call (833) 754-7503 - a live person answers, day or night.
Why Ironworks Gate Co. Is Crafton’s Preferred Gate Parts & Welding Company
Crafton homeowners have long memories. They remember which contractors show up when promised and which ones disappear after the check clears. We’ve built our reputation in Allegheny County over 42 years by doing the former. Our background-checked, uniformed technicians work under the K.E.Y.S. code - Krafted right, Every time, Your home first, Standing behind it - and every job carries our written 90-Day Done Right Promise, the Keystone Standard.
Response time to Crafton is typically same-day or next-day. We keep parts inventory stocked for the nine automation brands we certify on, including FAAC, BFT, and Viking, so we’re not ordering components while your gate hangs open. Local knowledge matters here. A technician who doesn’t understand how Chartiers Creek valley clay heaves posts or how hillside cross-grades bind swing gates will be back within the year. We aim to be the last call you make.
Our standing offers apply to every Crafton job: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Our Gate Parts & Welding Services in Crafton
Hinge Replacement
Original wrought-iron and tubular steel hinges on Crafton’s 1900-1945 housing stock corrode faster than you’d expect. The humid creek-valley air accelerates surface rust, and once pitting starts, the hinge pin loosens and the gate drags. We stock heavy-duty replacements and can fabricate custom offsets for hillside installations where standard hinges bind within a season. A typical hinge replacement in Crafton runs $180-$340 for a single gate, $280-$480 for a double.
Post Replacement
This is the big one in Crafton. The borough’s clay-heavy soils, saturated by Chartiers Creek valley moisture, expand and contract dramatically through Pittsburgh’s freeze-thaw cycles. Posts heave. Gates sag. Temporary shimming fails before the daffodils bloom. We set posts in concrete below the frost line with proper drainage, and we re-plumb to the actual grade of your driveway - not to some theoretical level. Post replacement in Crafton typically costs $450-$850 depending on depth, soil condition, and whether we’re resetting an automation bracket. On Kennedy Avenue, we found a pre-WWII tubular steel gate with a sagged LiftMaster operator arm - the clay soil had heaved the post 2 inches that winter. We re-plumbed the post, fabricated a custom offset hinge, and aligned the gate track to the sloped driveway. Done right, and backed in writing.
Rail Repair
Wooden gates in low-lying Crafton properties near the creek take periodic flooding. The base rail rots where it meets the post. Steel gates suffer weld fatigue at stress points. We cut out damaged sections, fabricate matching replacements, and weld with proper penetration so the repair outlasts the original. Rail repair runs $220-$420 for spot welding, $380-$650 for full rail replacement on a standard residential gate.
Custom Welding
Some gates can’t be fixed with catalog parts. Hillside driveways near the Carnegie border need custom hinge offsets or uphill-side sag adjusters that account for cross-grade. We fabricate these in our mobile welding rig, on-site, to the actual angles of your installation. Custom welding in Crafton starts around $280 for simple bracket fabrication and runs to $650 for complex multi-angle hinge assemblies with adjustment capability.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crafton
We maintain certification and parts inventory for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Crafton homeowners, this means the correct diagnosis and the correct part on the first visit. We’re not guessing between a FAAC 770 control board and a BFT Thalia keypad - we’ve got both in the truck, along with the Viking and Linear operators common on older Crafton installations. Fast turnaround because the part is already here.
Common Gate Parts & Welding Problems We See in Crafton Homes
- Annual post heave from freeze-thaw clay soils. Crafton’s position in the Chartiers Creek valley intensifies Pittsburgh’s winter freeze penetration. Frost reaches deep enough into saturated clay to shift posts 1-3 inches yearly. Temporary shimming fails within one season. Proper re-plumbing with below-frost-line setting is the only lasting fix.
- Galvanic corrosion on original wrought-iron hinges. The humid creek-valley air, combined with decades of paint failure on Crafton’s ornamental gates, creates perfect conditions for hinge corrosion. Replacement welding becomes a recurring need. We use compatible filler metals and proper prep to slow the cycle.
- Hillside cross-grade driveway binding. On Crafton’s steeper streets climbing toward Carnegie, gravity-swing gates installed with standard plumb assumptions drag and bind within months. Custom hinge offsets account for the actual grade. Generic repairs won’t hold alignment.
- Flood-damaged base rails on wooden gates. Properties near Chartiers Creek periodic flood zones see accelerated rot at the post-rail joint. We sister in treated replacement stock or convert to steel bottom rails where repeat flooding is likely.
Pricing for Gate Parts & Welding in Crafton, PA
Honest pricing, settled before we turn a bolt. Here’s what Crafton homeowners typically see:
| Service | Typical Range in Crafton |
|---|---|
| Hinge replacement (single gate) | $180 - $340 |
| Hinge replacement (double gate) | $280 - $480 |
| Post re-plumbing / replacement | $450 - $850 |
| Rail spot repair / welding | $220 - $420 |
| Full rail replacement | $380 - $650 |
| Custom hinge offset fabrication | $280 - $650 |
Steep hillside installations near the Carnegie border may run toward the higher end due to access and the complexity of grade-compensating hardware. Creek-adjacent properties with saturated soils sometimes need deeper post setting than standard. We assess on-site, explain what we find, and give you the full price before work begins. No surprises on the bill. Estimates are free - call (833) 754-7503.
We Also Serve Cities Near Crafton
Our service radius covers the full Allegheny County valley system. We regularly work in Crafton and the surrounding communities: Dormont with its similar hillside housing stock, Carnegie along the creek corridor, McKees Rocks with its industrial-era gates, and Mount Lebanon’s older estate installations. Same crew, same parts inventory, same written guarantee.
Serving Crafton, PA - Our Local Coverage Area
We’re based in the Crafton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Crafton
Because the root cause is usually post heave from freeze-thaw clay soils, not the gate itself. Crafton’s Chartiers Creek valley location saturates soils and drives deep frost penetration. Shimming or adjusting the gate without re-plumbing the post below frost line is a temporary fix at best. We re-plumb with proper depth and drainage. Call (833) 754-7503 for an assessment - estimates are free.
Yes. We fabricate custom hinge offsets and uphill-side sag adjusters for exactly this terrain. In Crafton’s hillside streets, standard plumb assumptions fail because the driveway cross-grade creates binding pressure. We measure the actual angles and weld hardware to match. Most slope corrections run $280-$650 and are done in one visit.
We fabricate custom replacements when catalog parts don’t exist. Crafton’s 1900-1945 housing stock includes ornamental wrought-iron and tubular steel gates with hardware no longer manufactured. Our mobile welding rig produces pins, brackets, and hinge assemblies matched to the original dimensions. Bring a photo or we measure on-site.
In Crafton’s clay-heavy, freeze-thaw soils, improperly set posts heave annually. Properly set posts with below-frost-line concrete and drainage should hold for 10-15 years. If you’re re-plumbing every 2-3 years, the original setting was too shallow or lacked drainage. We fix it once, correctly. Call for a free evaluation.
Sometimes. If the gate structure and posts are sound, a new operator improves reliability and adds modern safety features. If the gate itself is sagging, corroded, or post-heaved, a new motor won’t fix the mechanical problems. We assess the full system and give you an honest recommendation either way. Free second opinion on any written estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Crafton and Allegheny County since 1984.