Fast, Reliable Gate Parts & Welding Across Cheney
Gate parts and welding repair in Cheney typically runs $180-$650 depending on whether you’re resetting a frost-heaved post or welding a twisted farm gate frame back square. Most jobs are completed in a single visit, with upfront pricing settled before we strike an arc. Call (833) 754-7503 - a live person answers, 24 hours a day.
We’ve been serving Cheney and the surrounding Palouse wheat country for over 42 years. Our shop knows the difference between a Spokane suburban driveway gate and the heavy pipe-frame farm gates that dominate rural-residential parcels west and south of Cheney. Those gates take a beating. Deep frost heave, dry summer heat, and the weight of 16-foot steel frames - they all show up in our service calls. We bring a welding rig, a full inventory of hinges, latches, and rollers, and the know-how to fix it without a second trip.
Cheney’s spread-out geography means response time matters. We’re typically on-site within the same day for standard calls, and we carry parts for our Gate Parts & Welding team to complete most repairs without ordering out. Whether you’re off Cheney-Spangle Road with acreage bordering wheat fields or in a mid-century ranch near Eastern Washington University, we know the gate types, the soil conditions, and the failure patterns that repeat every season.
Why Ironworks Gate Co. Is Cheney’s Preferred Gate Parts & Welding Company
Our reputation in Cheney was built on heavy-duty gates that other companies walk away from. Generalist handymen don’t carry 220-volt welding rigs or stock 7-gauge steel hinge brackets. We do. Homeowners from the 99004 ZIP code call us because we show up with the right equipment, diagnose the real problem, and quote the full repair before starting.
Reviews from Cheney customers consistently mention two things: we come prepared, and we come back if something isn’t perfect. The 90-Day Done Right Promise - our written Keystone Standard - means no paperwork, no arguing, no exceptions. If a weld cracks or a post settles, we return and make it right.
Response time to Cheney averages same-day for calls placed before noon, next-morning for afternoon requests. Emergency calls - a gate blocking a driveway, a livestock gate that won’t secure - get prioritized. A live person answers the phone 24/7, not a voicemail tree.
Local knowledge separates a lasting repair from a band-aid. We know Cheney’s frost line exceeds 18 inches, so we set posts deeper than contractors from milder climates. We know the rental properties near EWU see gates that haven’t been maintained in a decade. And we know the spring thaw window - April through May - is when rural landowners need field access and can’t afford a binding gate.
Our Gate Parts & Welding Services in Cheney
Post Replacement
Post replacement in Cheney runs $320-$580 for a standard residential post, and $480-$850 for heavy H-brace or drive-in assemblies on farm gates. The difference is depth and concrete volume. Cheney’s ground freezes hard. A post set to 30 inches will heave within two winters. We dig to 42 inches minimum, use high-strength concrete with proper drainage, and slope the grade to shed water. On rural parcels west of town, we’ve replaced dozens of posts that were originally set too shallow by fence contractors who didn’t account for Palouse frost penetration. Last spring, we replaced a twisted H-brace assembly on a 16-foot steel farm gate off Cheney-Spangle Road near the wheat fields. The frost had heaved the drive-in post assembly, dropping the hinge side and binding the latch. Our crew reset the post with a deeper concrete footer (42 inches) to beat the frost line and welded a new LiftMaster hinge bracket to restore proper swing clearance.
Custom Welding
Custom welding in Cheney costs $180-$420 for frame repairs, and $350-$650 for full gate fabrication or major structural rebuilds. We field-weld broken pipe-frame gates, fabricate replacement hinge brackets when OEM parts are obsolete, and reinforce sagging frames with gusset plates. Our welding rig runs 220-volt MIG and stick, capable of penetrating the thick-wall tubing common on agricultural gates. Many Cheney acreage owners have gates that were hand-built decades ago - no brand name, no parts catalog. We measure, cut, and weld what they need. The dry summers here split wooden gate boards and thermally expand metal frames enough to bind latches and throw automated gate sensors out of alignment. A welded steel frame with proper cross-bracing resists that seasonal movement.
Hinge Replacement
Hinge replacement in Cheney ranges from $140-$280 for standard residential hinges, and $220-$400 for heavy-duty ball-bearing or adjustable hinges on farm gates. Rust is the primary killer. Cheney’s low humidity doesn’t stop moisture from collecting in hinge pockets where snow piles against the gate. On rental properties near EWU, we regularly find hinges that haven’t been greased since the Bush administration. We stock adjustable J-bolt hinges, heavy barrel hinges, and specialty brackets for nine automation brands including Linear and Viking. Every hinge replacement includes proper shimming and swing clearance adjustment - because a hinge hung out of plumb will wear out in half the time.
Rail Repair & Gate Rollers
Rail repair and roller replacement in Cheney runs $160-$340. Sliding gates on rural properties collect dust and chaff from adjacent wheat fields, accelerating roller wear. We clean the track, replace seized or cracked rollers, and realign the gate carriage. For cantilever systems common on larger acreage entrances, we inspect the counterbalance and adjust the roller spacing to prevent the gate from tipping under its own weight.
Latch & Lock Repair
Latch and lock service in Cheney costs $120-$260. Thermal expansion misaligns strike plates. Frost heave drops gates below their latching height. We install adjustable latches, magnetic catches, and keyed alike systems for multi-gate properties. For automated gates, we ensure the latch releases cleanly with the opener’s actuator - no dragging, no half-closed positions that trigger false alarms.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cheney
We carry parts and provide certified service for nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Cheney customers, this means no waiting on shipped parts for common failures. We stock Linear actuators and Viking control boards, along with Ghost Controls battery kits and DoorKing loop detectors. Our technicians are trained on each brand’s diagnostic protocols - so the correct fix gets made on the first visit, whether it’s a failed FAAC encoder on a university-area estate or a misaligned LiftMaster safety sensor on a ranch gate off Salnave Road.
Common Gate Parts & Welding Problems We See in Cheney Homes
- Spring frost heave twisting heavy pipe-frame farm gates. On rural-residential parcels west and south of Cheney, deep ground freeze heaves concrete-set posts out of plumb each spring. The hinge side drops, the latch side binds, and the gate frame torques out of square. We see this repair pattern almost exclusively in the April-May thaw window, before landowners need vehicle access for field work.
- Deferred maintenance on student rental gates near EWU. Properties converted to rentals near the Eastern Washington University campus frequently present with rusted hinges, broken latches, and water-rotted wood posts that were never serviced between tenants. Gates on these mid-century homes often date to the original construction.
- Dry summer heat splitting wood and expanding metal frames. Cheney’s summers regularly top 90°F with low humidity. Wooden gate boards shrink and split. Metal frames expand enough to bind latches and throw automated gate sensors out of alignment, particularly on LiftMaster and FAAC systems with tight safety tolerances.
- Heavy agricultural gates with no OEM support. Many acreage owners have custom-built pipe gates from the 1980s or 1990s. No parts catalog exists. We measure, fabricate, and weld replacement components on-site - hinge brackets, latch assemblies, frame reinforcements - to keep functional gates in service rather than forcing a full replacement.
Pricing for Gate Parts & Welding in Cheney, WA
Here is what gate parts and welding work costs in the Cheney market. These are real ranges based on jobs we’ve completed in the 99004 ZIP code, not teaser prices that change on arrival.
| Service | Typical Range in Cheney |
|---|---|
| Hinge Replacement (residential) | $140 - $280 |
| Hinge Replacement (heavy farm gate) | $220 - $400 |
| Post Replacement (standard depth) | $320 - $580 |
| Post Replacement (deep-set, frost-resistant) | $480 - $850 |
| Rail / Frame Weld Repair | $180 - $420 |
| Custom Welding / Fabrication | $350 - $650 |
| Gate Roller Replacement | $160 - $340 |
| Latch & Lock Repair | $120 - $260 |
What moves the price: depth of the post footer, thickness of the steel being welded, whether the gate is automated (requiring sensor realignment), and accessibility. A gate at the end of a half-mile gravel lane takes longer to reach than a driveway in Cheney proper. We quote the full price before starting - a square deal, no surprises on the bill. Every repair over $250 qualifies for our standing $50 discount. Seniors and veterans receive 5% off, always. Call (833) 754-7503 for a free estimate.
We Also Serve Cities Near Cheney
Our service radius covers the full Spokane-Cheney corridor. We regularly complete Gate Parts & Welding in Cheney and travel to Airway Heights for residential communities near the airport, Spokane for urban estate gates, and Dishman and Opportunity for homeowners east of the city who need the same heavy-duty expertise we bring to Cheney acreage properties.
Serving Cheney, WA - Our Local Coverage Area
We’re based in the Cheney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Cheney
We set gate posts 42 inches deep minimum in Cheney, with a bell-shaped concrete footer that extends below the frost line. Cheney’s ground frost regularly exceeds 18 inches, and posts set to 30 inches or less will heave within one or two winters. Our deeper setting costs more upfront but eliminates the cycle of annual realignment. Call (833) 754-7503 for an exact quote - estimates are free.
Yes. We field-weld twisted pipe-frame farm gates on rural-residential parcels west and south of Cheney, and we fabricate replacement brackets when no OEM part exists. Our welding rig handles thick-wall agricultural tubing, and we can reset the post assembly with a frost-resistant footer in the same visit. Call (833) 754-7503 for an exact quote - estimates are free.
Cheney’s dry summer heat - regularly exceeding 90°F - causes metal gate frames to expand and wooden boards to shrink. This thermal movement throws the gate out of alignment with its strike plate and safety sensors, causing the LiftMaster system to detect an obstruction and halt or reverse. We adjust the gate geometry and sensor positioning to compensate for seasonal expansion, and we can weld in frame bracing to reduce the movement. Call (833) 754-7503 for an exact quote - estimates are free.
We are trained and equipped on nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Cheney customers, including Linear actuators and Viking control boards, so most repairs complete in one visit. Call (833) 754-7503 for an exact quote - estimates are free.
Yes. We repair gates on rental properties near the Eastern Washington University campus, where deferred maintenance often leaves rusted hinges, broken latches, and rotted wood posts. We work with property owners and managers, provide written estimates, and complete repairs with minimal disruption to tenants. Call (833) 754-7503 for an exact quote - estimates are free.
Ready to get your gate working right? Call Ironworks Gate Co. at (833) 754-7503. A live person will answer, 24 hours a day. We’ll give you a free estimate, show up when we say, and back every weld and every part with our 90-Day Done Right Promise - written, no hassle, no arguing. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Cheney since 1984.