Gate Parts & Welding in Burlington, MA - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Parts & Welding Across Burlington

Gate hinge replacement, post repair, and custom welding in Burlington typically runs $180-$650 depending on the scope, and most jobs are completed in a single visit with upfront pricing settled before we start. We’re familiar with the tight clearances of Burlington’s townhouse clusters off Wilmington Road and the heavy-duty demands of corporate gates along Middlesex Turnpike and Network Drive. If your gate is dragging, sagging, or won’t latch, call us at (833) 754-7503. A live person answers, 24 hours a day.

Call (833) 754-7503

Burlington’s housing stock tells a story: single-family homes built between the 1950s and 1980s with original tubular-steel or galvanized chain-link gates now reaching end-of-life, alongside condo complexes from the 1990s and 2000s with shared entry systems installed by a rotating cast of contractors. That mix means our Gate Parts & Welding team sees everything from rusted 1970s hinge pins to mismatched HOA operator systems that need sorting out. We’ve been serving Middlesex County since 1984, and we know Burlington’s freeze-thaw cycles, its salt-blasted commercial corridors, and the specific hardware that holds up here.

Why Ironworks Gate Co. Is Burlington’s Preferred Gate Parts & Welding Company

We’ve built our reputation in Burlington on showing up when we say we will and fixing it right the first time. Our technicians are background-checked, uniformed, and guided by our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.

Our 90-Day Done Right Promise, the Keystone Standard, applies to every gate job we do in Burlington. Written guarantee, no paperwork, no arguing, no exceptions. If it’s not right, we come back and make it right.

Most of our Burlington calls are answered within minutes, not hours. We carry parts for nine major automation brands, including Linear, Viking, and DoorKing, so we rarely need to order and return. That matters when you’re managing a loading-dock gate off Cambridge Street or a townhouse entry on Wilmington Road.

Last winter, we replaced the corroded hinge pins and rollers on a LiftMaster swing gate at a townhouse complex on Wilmington Road, where salt spray from Middlesex Turnpike had seized the original parts. We also upgraded the gate operator to a FAAC model with rolling-code remotes for better security, and the HOA now has us back quarterly for lubrication and fastener checks.

Our Gate Parts & Welding Services in Burlington

Hinge Replacement

Burlington’s heavy road-salt use on commercial arterials like Cambridge Street and Middlesex Turnpike accelerates corrosion on steel gate hardware, hinges, and operator housings, making annual lubrication and hardware inspection a realistic recurring upsell. We replace seized, cracked, or worn hinges on swing gates and slide gates throughout Burlington’s residential subdivisions and commercial parks. Most hinge replacements run $180-$320 for residential gates, with commercial heavy-duty hinges ranging $280-$480. We use galvanized or stainless-steel hardware rated for New England’s salt exposure, and we always check the gate frame alignment before installing new hinges. A hinge installed on a racked frame will fail again in months.

Post Replacement

Burlington’s freeze-thaw cycle, with a Massachusetts frost depth of roughly 48 inches, causes significant ground heave in clay-heavy Middlesex County soils, routinely racking gate frames and cracking concrete gate-post footings that weren’t poured deep enough. We see this constantly on older homes near the Burlington Mall area and in the 01803 zip code, where 1960s and 1970s driveway gates were set in shallow concrete pads. Post replacement in Burlington typically costs $450-$850 depending on gate weight and whether we need to break out old concrete and pour to proper depth. We dig to 48 inches minimum, use sono-tube forms, and let the concrete cure before hanging the gate. No shortcuts.

Rail Repair

Bent, cracked, or separated rails are common on Burlington’s older chain-link and tubular-steel gates, especially where snowplows or delivery trucks have made contact. We straighten light bends in the field when possible, or cut and sleeve damaged sections for a permanent repair. Rail repair in Burlington generally runs $220-$420. For gates with repeated rail damage, we’ll tell you honestly whether repair or replacement makes more sense.

Custom Welding

Our mobile welding rig lets us fabricate and repair steel components on-site across Burlington, from reinforcing cracked gate frames to building custom brackets for non-standard installations. We weld mild steel, stainless, and aluminum, and we match existing finishes with cold-galvanizing or powder-coat touch-up. Custom welding in Burlington starts around $280 for basic field repairs and ranges to $650+ for extensive fabrication. The corporate campuses and warehouses clustered off Middlesex Turnpike and Network Drive run their access gates at high daily cycle counts year-round; local techs know that operator gearboxes on those sites fail not from neglect but from sheer volume, and that facility managers there respond well to preventive maintenance contracts rather than emergency-only calls. We build those relationships.

Gate Rollers & Latch Hardware

Slide gate rollers wear flat spots or seize in Burlington’s salt and grit environment. We stock V-groove, box-track, and cantilever rollers for most common gate sizes, and we replace them with sealed-bearing units where the application allows. Latch and lock hardware, from simple gravity latches to magnetic locks and electric strikes, runs $140-$340 installed depending on access-control integration.

Trusted Brands We Service in Burlington

We’re trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Burlington customers, that means the correct fix on the first visit, whatever is on your driveway or loading dock. We stock common parts for Linear, Viking, and DoorKing systems locally, and our relationship with regional distributors gets us next-day access to specialized components for the other brands. No waiting two weeks for a hinge kit or operator gear while your gate hangs open.

Common Gate Parts & Welding Problems We See in Burlington Homes

• Ground heave racking gate frames. Burlington’s freeze-thaw cycle shifts clay soils and tilts posts that weren’t set to 48-inch frost depth. The gate still “works,” but it drags, binds, and eventually tears its own hinges apart. We see this most in the older subdivisions near the 01803 zip code.
• Salt corrosion seizing hinges and rollers. Road salt on Cambridge Street, Middlesex Turnpike, and the Route 128 corridor sprays onto adjacent residential and commercial gates. Steel hardware that should last fifteen years fails in five. Annual lubrication and inspection catches this before it becomes a post replacement.
• High-cycle commercial operator failures. The corporate campuses off Network Drive run swing and slide gates hundreds of times daily. Gearboxes overheat, limit switches drift, and safety loops fail from sheer cycle volume, not neglect. These sites need preventive maintenance contracts, not just emergency calls.
• Mismatched HOA gate systems. Burlington’s 1990s-2000s townhouse complexes often have gates installed by different contractors over the years, with incompatible remotes, obsolete keypads, and no documentation. We inventory what’s there, standardize where possible, and document everything for the property manager.

Pricing for Gate Parts & Welding in Burlington, MA

We Also Serve Cities Near Burlington

Our service area extends throughout Middlesex County, including Pinehurst, Woburn, Wilmington, and Lexington. Whether you’re managing a commercial access gate off Route 128 or maintaining a residential driveway gate in a quiet subdivision, we respond with the same prompt, thorough service. Same-day appointments are often available.

FAQs - Gate Parts & Welding in Burlington