Fast, Reliable Gate Parts & Welding Across Boston
Gate hinge repair and custom welding in Boston typically runs $180-$650 depending on the gate’s age, material, and whether masonry anchors need replacement. Most calls from Beacon Hill, Back Bay, and the South End reach us within 45 minutes to an hour, and we complete the majority of hinge, post, and rail jobs in a single visit.
We’ve been walking these brick sidewalks for over 42 years. We know that a failed gate on Mount Vernon Street isn’t just a repair call - it’s a piece of 19th-century ironwork that has to keep working without losing its period character. Our Gate Parts & Welding crew carries the masonry bits, stainless hardware, and portable welding equipment to fix gates where they stand, anchored in brownstone and brick that demands a lighter hand than modern construction.
Call (833) 754-7503. A live person answers, 24 hours a day, 7 days a week. We’ll give you an upfront price before we turn a single bolt.
Why Ironworks Gate Co. Is Boston’s Preferred Gate Parts & Welding Company
Our reputation in Boston was built slowly, the way ironwork should be. Property managers on Beacon Hill call us back because we understand the difference between ordinary maintenance and alteration under Boston Landmarks Commission rules. Homeowners in the South End recommend us because we’ve replaced rusted pintles in February, in the snow, without chipping the brownstone pilaster.
We’ve earned strong reviews from Boston customers over four decades - not by asking for them, but by showing up when we say, pricing honestly, and standing behind the work. Our 90-Day Done Right Promise, the Keystone Standard, means no paperwork and no arguing if something isn’t right. We come back and make it right. Every job, no exceptions.
Response time to Boston neighborhoods averages under an hour during business hours. Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
Our Gate Parts & Welding Services in Boston
Hinge Replacement
Gate hinges in Boston don’t wear out - they rust out. The combination of coastal salt air, heavy road salt on brick sidewalks, and over 30 freeze-thaw cycles each winter attacks pintles and mounting hardware from the inside. We see this constantly in the 02108 and 02116 ZIPs, where 1860s wrought-iron gates still hang on original masonry anchors.
We stock heavy-duty stainless steel and bronze hinge assemblies sized for period gates, and we know how to extract a corroded pintle from a granite or brownstone pier without blowing out the surrounding masonry. Typical hinge replacement in Boston runs $220-$380 for standard residential gates, $450-$650 when we need to rebuild the masonry anchor or weld a custom pintle sleeve.
Post Replacement
Frost heave is Boston’s quiet enemy. Every spring, we field calls from Back Bay and the South End where brick or granite piers have shifted over winter, throwing gates out of plumb and stressing hinges until they bind or fail. Unlike wood-post installations in the suburbs, Boston’s historic gates are mounted into masonry - brick piers, granite lintels, brownstone pilasters - and resetting a post means working with the existing stone, not against it.
We replace rotted or corroded iron posts with period-appropriate profiles, anchored into rebuilt masonry cores with non-shrink grout and stainless hardware. Post replacement in Boston typically costs $380-$720, with complex masonry reconstruction pushing toward the higher end.
Rail Repair
Bent or broken rails on estate and driveway gates weaken the whole frame and accelerate hinge failure. We straighten heat-bent wrought iron rails when possible, and fabricate replacement sections when the metal is too compromised. Our mobile welding rigs run 220-amp MIG and TIG setups, so we can lay a proper bead on-site rather than hauling your gate to a shop and leaving the opening unsecure.
Rail repair in Boston generally runs $180-$420 for straightening and reinforcement, $340-$580 when we need to cut out and weld in new material.
Custom Welding
This is where our craft shows. We repaired a rusted-out hinge pintle on an 1860s wrought-iron jardinière gate at 76 Mount Vernon Street in Beacon Hill. The masonry anchor had corroded through thirty freeze-thaw cycles, and we had to weld a new stainless steel pintle sleeve over the original iron core to maintain the historic profile while preventing future rust-out.
Custom welding for historic Boston gates demands TIG control - too much heat and you destroy the wrought iron’s grain structure; too little and the bond won’t hold through another Boston winter. We charge $150-$280 per hour for custom welding, with most historic repairs completed in 1-2 hours plus materials.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boston
We carry parts and maintain certification on nine gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Boston customers, this means we don’t order parts blind and make you wait. Our trucks stock common FAAC and BFT hydraulic arm assemblies, Linear and Viking slide gate operators, and the control boards that salt corrosion likes to eat. When a motor fails on a Beacon Hill carriage gate in January, we fix it that day, not next week.
Common Gate Parts & Welding Problems We See in Boston Homes
- Rust-through of hinge pintles and mounting hardware. Coastal salt air and heavy road salt on brick sidewalks accelerate corrosion from the inside out. By the time you see rust staining the brownstone, the pintle is often hollow. We catch this early during our $89 Seasonal Tune-Up.
- Frost heave misaligning masonry piers. Brick and granite gate posts shift every winter in Boston’s freeze-thaw cycle. Gates that swung freely in October bind by April. Seasonal re-plumbing is a recurring service call we plan for, not react to.
- Stop-work orders from unauthorized gate replacement. Swapping a deteriorated original gate with modern aluminum or powder-coated steel without Boston Landmarks Commission review triggers enforcement action in historic districts. We guide clients through what’s ordinary maintenance versus alteration.
- Failed automation on gates never designed for motors. Historic wrought iron gates in the 02109 and 02110 ZIPs often lack the structural backing or hinge capacity for modern operators. We reinforce frames with hidden steel before mounting FAAC or Viking systems, preserving the visible period ironwork.
Pricing for Gate Parts & Welding in Boston, MA
Honest pricing means numbers, not vague promises. Here’s what gate parts and welding work costs in Boston’s market:
| Service | Typical Range in Boston |
|---|---|
| Hinge replacement (standard) | $220-$380 |
| Hinge replacement (with masonry rebuild) | $450-$650 |
| Post replacement (iron post only) | $380-$520 |
| Post replacement (with masonry reconstruction) | $520-$720 |
| Rail straightening / repair | $180-$420 |
| Rail replacement (cut and weld) | $340-$580 |
| Custom welding (hourly) | $150-$280/hr |
| Seasonal tune-up | $89 |
What moves the price: masonry condition, access to the work area, whether the gate is historic wrought iron or modern steel, and whether Landmarks Commission compliance adds documentation or specialized fabrication time. We settle the full price before we start. No surprises on the bill.
Active offers for Boston homeowners: $50 off any repair over $250. Free second opinion on any written estimate. Permanent 5% Senior and Veteran discount. Call (833) 754-7503 for your exact quote - estimates are free.
We Also Serve Cities Near Boston
Our Gate Parts & Welding in Boston coverage extends to Hamburg, East Aurora, Lackawanna, and West Seneca. Same trucks, same technicians, same 90-Day Done Right Promise. If you’re just outside the city and your gate is hanging on rusted hinges, we cover that ground too.
Serving Boston, MA - Our Local Coverage Area
We’re based in the Boston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Boston
Ordinary maintenance - repairing or replicating a gate in-kind - does not require Boston Landmarks Commission approval. Alteration, meaning any change to profile, finish, or material, does trigger review. We know that line precisely, and we keep a working relationship with a local ironworker who can hand-forge period-matching scrollwork so your repair stays on the right side of it. Call (833) 754-7503 before you change anything visible - a quick conversation now beats a stop-work order later.
Boston averages over 30 freeze-thaw cycles per winter, and the coastal salt air plus heavy road salt on brick sidewalks causes wrought iron hinge pins, pintles, and mounting hardware to rust from the inside out far faster than inland cities. By the time you notice stiffness or staining, the metal is often paper-thin. Our $89 Seasonal Tune-Up catches this corrosion early, before the hinge fails completely and damages the masonry anchor. Call (833) 754-7503 to schedule.
Yes, when the gate frame is properly reinforced first. Historic wrought iron gates in Boston’s 02109, 02110, 02111, and 02112 ZIPs often lack the torsional rigidity and hinge capacity that FAAC, BFT, Linear, or Viking operators require. We weld hidden steel backing plates and upgrade hinge assemblies before mounting any motor, preserving the visible period ironwork. The full job typically runs $1,200-$2,400 depending on gate size and masonry condition. Call (833) 754-7503 for a site assessment.
We use TIG (GTAW) welding for historic wrought iron because it offers precise heat control - critical for preserving the metal’s grain structure and avoiding brittle failure through the next freeze-thaw cycle. Our mobile rigs run 220-amp Miller TIG setups with pulse control, and we preheat thick sections to prevent thermal shock. For stainless steel pintle sleeves on original iron cores, we use 309L filler rod to bridge the dissimilar metals without galvanic corrosion. Call (833) 754-7503 if you want to discuss the technique for your specific gate.
We extract old anchors with masonry-core bits sized to the original hole, never hammer-drilling blindly. For brownstone, which is softer and more porous than granite, we use low-torque extraction and backfill with non-shrink hydraulic grout rather than expansive anchoring epoxy. Stainless steel expansion anchors or epoxy-coated threaded rod carry the load without telegraphing as modern hardware against period stonework. Post anchoring in Boston masonry typically adds $140-$280 to a standard post replacement. Call (833) 754-7503 for an exact quote on your specific pier condition.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Boston since 1984.