Fast, Reliable Gate Parts & Welding Across Arlington
Gate parts and welding repair in Arlington, MA typically runs $180-$650 depending on whether you need hinge work, post re-anchoring, or full custom fabrication. Most Arlington calls are handled same day or next day. Call (833) 754-7503 - a live person answers, 24 hours a day, 7 days a week.
We’ve been driving to Arlington since 1984, and we know the difference between a gate on a new foundation in Arlington Heights and one hanging on century-old wrought iron down by Massachusetts Avenue. Arlington’s narrow side yards, clay-heavy soil, and pre-WWII housing stock create gate problems you won’t find in newer suburbs. When your side-yard gate won’t open and the trash trucks are coming, or your ornamental iron has sheared at the weld after another freeze-thaw winter, you need someone who shows up with the right parts and knows how to work with old metal. That’s our Gate Parts & Welding team.
Why Ironworks Gate Co. Is Arlington’s Preferred Gate Parts & Welding Company
Homeowners in Arlington’s 02474 and 02476 ZIP codes have called us back for forty-two years because we treat a 1920s wood gate with the same care we’d give our own mother’s. Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same attention as the first.
We answer the phone live, around the clock. No voicemail trees. No callback queues. No waiting until Monday morning. When an Arlington gate is jammed shut - blocking utility access, deliveries, or trash removal - that matters.
Our 90-Day Done Right Promise, the Keystone Standard, applies to every job. Written. No paperwork to file. No arguing. If it’s not right, we come back and make it right. Every time. On every job.
We carry $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% senior and veteran discount. Upfront pricing is settled before we turn a single bolt. A square deal: no surprises on the bill.
Our Gate Parts & Welding Services in Arlington
Hinge Replacement
Arlington’s original wrought-iron gates - the kind still guarding side yards off Broadway and Medford Street - often hang on hinges that have been carrying load for eighty to a hundred years. The pin wears oval. The barrel cracks at the weld. We fabricate replacement barrels and pins to match existing hole spacing, or when the gate frame itself has distorted from decades of sag, we weld on new hinge plates with reinforced gussets. A typical hinge replacement in Arlington runs $180-$320. Heavier ornamental work with custom forging starts around $450.
Post Replacement
This is where Arlington’s clay soil makes us different from every other Boston suburb. Middlesex County’s glacial till holds water like a bathtub. When winter hits, that clay freezes solid and expands, heaving wooden and steel gate posts 2-4 inches out of plumb by March. We’ve pulled posts in East Arlington that were leaning fifteen degrees, the gate jammed hard against the stoop, the latch torn clean off the jamb. Our post replacement includes digging to below frost line - typically 42 inches in Arlington - setting the post in gravel drainage, and sometimes adding a concrete pier with a steel shoe to isolate the post from ground movement. Post replacement in Arlington typically runs $380-$650. We also re-anchor existing steel posts with welded angle brackets and epoxy anchors when the post itself is sound but the footing has failed.
Rail Repair
The wood side-yard gates common through Arlington’s Victorian and triple-decker neighborhoods were built with mortise-and-tenon joinery, not bolts. After ninety years of rain wicking into end grain, the tenons rot and the rails separate. Off-the-shelf gate kits won’t fit these dimensions. We mill replacement rails to match, scarf-joint or dowel them into existing stiles when the stiles are sound, or fabricate complete new frames using the original gate as a pattern. Rail repair in Arlington typically runs $280-$520. Full frame replacement starts at $590.
Custom Welding
Arlington’s ornamental iron gates - the scrollwork entries on Queen Anne Victorians, the spear-top side-yard barriers - break at the welds after enough freeze-thaw cycles have stressed the metal. We match existing scroll patterns, forge new pickets to match hand-hammered profiles, and weld with processes appropriate to the original metal: stick or TIG for wrought iron, MIG for modern steel. In East Arlington’s crowded two-family streets, we replaced the seized rollers and custom-welded a reinforced hinge plate on a 1920s wood side-yard gate that had been jammed against the concrete stoop by frost heave. The original LiftMaster opener’s track had bent from the misalignment, so we retrofitted the section with a modern linear actuator. Custom welding in Arlington starts at $240 for simple repairs and runs to $680 for extensive ornamental restoration.
Gate Rollers, Latch & Lock
Sliding gates on Arlington’s tighter properties - common behind commercial buildings along Massachusetts Avenue and on some larger residential lots - depend on rollers that seize after winters of road salt and grit. We stock V-groove and flat rollers in galvanized and stainless steel. Latch and lock work includes welding up new strike boxes when frost heave has moved the post out of alignment, and installing weather-resistant deadbolts or magnetic locks integrated with existing access control. Roller replacement in Arlington runs $160-$290. Latch and lock repair or replacement runs $140-$260.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Arlington homeowners, this means the correct fix on the first visit, whatever is on your driveway. We stock common parts for Linear, Viking, and Ghost Controls locally, and our supply chain reaches FAAC and LiftMaster within 24-48 hours for less common items. Most automation repairs are completed in a single visit. If your vintage opener has cracked gears from decades of freeze-thaw stress, we’ll tell you honestly whether parts are still available or whether a modern retrofit - a linear actuator, perhaps, or a new Viking slide operator - is the smarter spend.
Common Gate Parts & Welding Problems We See in Arlington Homes
- Frost-heaved posts jamming ornamental gates against stoops. In East Arlington’s tightly spaced two- and three-family streets, a sagging gate is often wedged against the fence post or concrete stoop by frost heave, making it impossible to open at all by late February. Re-anchoring and custom welding of new hinge plates is the fix, not just cranking the old bolts tighter.
- Pre-WWII wood side-yard gates with rotted tenons and separated rails. These gates - the sole rear access on many Arlington properties - cannot be repaired with off-the-shelf parts from the hardware store. Full custom rail replacement, milled to match original profiles, is the only repair that lasts.
- Decades-old openers with cracked gear housings from freeze-thaw stress. LiftMaster and FAAC units from the 1980s and 1990s are common in Arlington, but gear housings crack after repeated thermal cycling, and parts are often discontinued. We evaluate honestly: retrofit vs. replace, with real numbers either way.
- Misaligned latches and strikes after winter ground movement. Arlington’s clay soils shift the receiving post while the gate post stays put - or vice versa. Welding a new strike box or slotting the latch mount gets you working again without replacing hardware that isn’t broken.
Pricing for Gate Parts & Welding in Arlington, MA
Here’s what Arlington homeowners typically pay. Every job gets upfront pricing before we start - a square deal, no surprises on the bill.
| Service | Typical Range in Arlington |
|---|---|
| Hinge replacement (standard) | $180 - $320 |
| Hinge replacement (ornamental/custom) | $450 - $620 |
| Post replacement (wood or steel, with below-frost footing) | $380 - $650 |
| Rail repair (wood, custom-milled) | $280 - $520 |
| Full wood frame replacement | $590 - $890 |
| Custom welding (simple repair) | $240 - $380 |
| Custom welding (ornamental restoration) | $450 - $680 |
| Gate roller replacement | $160 - $290 |
| Latch and lock repair or replacement | $140 - $260 |
| Seasonal tune-up | $89 |
What moves the price: depth of frost-line excavation for posts, whether original ornamental details need hand-forging, accessibility in narrow Arlington side yards, and whether automation integration is involved. We apply $50 off any repair over $250, and estimates are always free. Call (833) 754-7503 for exact pricing on your gate.
We Also Serve Cities Near Arlington
Our Gate Parts & Welding in Arlington coverage extends throughout the Boston metro area. We also serve Washington, Washington, D.C., McLean, and Alexandria with the same live-answer phone support, same-day scheduling when possible, and the same 90-Day Done Right Promise on every job.
Serving Arlington, MA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Arlington
Yes, in most cases we can free and repair a stuck vintage gate without full replacement. We assess whether the problem is frost-heaved posts, seized hinges, or swollen/rotted rails, then re-anchor, weld new hardware, or custom-mill replacement components to match. Call (833) 754-7503 - estimates are free, and we’ll give you honest guidance on repair vs. replace.
We stock parts for current LiftMaster models and can source many older components within 24-48 hours. For units where gears or control boards are discontinued, we’ll explain your retrofit options with real numbers - no pressure to upgrade if a repair still makes sense. Call (833) 754-7503 to check availability for your specific model.
Arlington’s clay-heavy glacial soils frost-heave gate posts 2-4 inches out of plumb each winter, so the hinge attachment point itself has shifted. Tightening bolts on a leaning post only strips threads. The real fix is re-anchoring or replacing the post below frost line, then welding reinforced hinge plates. We see this pattern every spring in 02474 and 02476. Call (833) 754-7503 for an assessment.
Yes. We forge replacement scrolls and pickets to match existing hand-hammered profiles, then weld with processes appropriate to the original metal. We photograph and measure your gate before fabricating, so the repair blends with the original work. Custom ornamental welding in Arlington starts around $450. Call (833) 754-7503 to schedule a look.
Repair makes sense when the stiles (vertical members) are sound and only rails or hardware need replacement. Replace when rot has compromised structural members, joinery has failed in multiple locations, or repeated repairs have weakened the frame. We’ll show you exactly what we found and give you numbers both ways - no pressure, just facts. Call (833) 754-7503 for a free estimate.
Ready to get your Arlington gate working right? Call Ironworks Gate Co. at (833) 754-7503. A live person will answer, 24 hours a day, 7 days a week. We’ll schedule your free estimate, settle on upfront pricing before any work begins, and back every repair with our written 90-Day Done Right Promise. Done right - and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Arlington since 1984.