Fast, Reliable Gate Motor & Opener Across Conway
Gate motor and opener repair in Conway, FL typically runs $180-$650 depending on whether it’s a control board replacement, full motor swap, or post re-plumbing job. Most Conway calls are completed same-day. Call (833) 754-7503.
We’ve been answering calls from Conway homeowners since 1984, and we know the 32812 corridor well. The lakefront ranches along Lake Conway, the split-levels tucked behind Gatlin Oaks Circle, the older townhome clusters near Curry Ford Road - we’ve worked on gates in all of them. Our trucks carry parts for nine major opener brands, so when your Ghost Controls unit quits after a July thunderstorm or your Viking slide motor groans to a halt, we don’t leave to “order something.” We fix it then and there.
Conway’s not a big place, but it has specific problems that generalist handymen miss. The high water table along the Conway Chain of Lakes. The lightning that rolls through Lightning Alley every summer afternoon. The 40-year-old wrought-iron gates that came with the house in 1978 and have never had proper maintenance. We account for all of it before we quote a price. No surprises on the bill.
Why Ironworks Gate Co. Is Conway’s Preferred Gate Motor & Opener Company
Our reputation in Conway was built one job at a time, mostly by homeowners who called us after someone else walked away from a rusted-out hinge or a post that had canted three inches into the driveway. They stay with us because we show up when we say we will, we explain the work in plain language, and we back every completed job with our written 90-Day Done Right Promise - the Keystone Standard. No paperwork to file. No arguing. If it’s not right, we come back and make it right.
We’re typically on-site in Conway within 90 minutes of a call, and a live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree. Not an answering service that promises a callback Monday morning. A real person who can dispatch a technician.
Our technicians are background-checked and uniformed, and they work by our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th gate in Conway gets the same attention as the first.
Our Gate Motor & Opener Services in Conway
Motor Installation
New gate motor installation in Conway demands more than bolting on a unit and programming a remote. The lakefront soil conditions here - organic-rich, water-saturated fill along Lake Conway and Little Lake Conway - cause posts to shift over time. We install with that future movement in mind, using proper footing depth and hardware that tolerates adjustment. A typical new motor installation in Conway runs $650-$1,200 for a standard residential swing gate, including basic post assessment. For lakefront properties where re-plumbing is needed, add $200-$400 for fast-set concrete footing work. We settle on an upfront price before we turn a single bolt.
Motor Repair
Most motor repairs in Conway are electrical, not mechanical. Lightning Alley lives up to its name from June through September, and we replace more fried control boards and surge protectors in 32812 than in drier inland zip codes. A control board replacement typically costs $280-$450. If the motor itself has burned out from years of fighting rusted hinges, a full motor replacement runs $480-$650. We diagnose on-site and give you a written estimate before any work begins.
Linear Motor Service
Linear motors are popular on Conway’s narrower driveways and townhome entries where a swing gate needs compact, powerful operation without the footprint of a bulky arm. We stock Linear actuators and replacement parts because they’re common in the 1960s-1980s housing stock that dominates this area. Linear motor repair in Conway typically runs $220-$380. Full replacement with a new Linear unit, including programming, runs $580-$890. We also handle Linear intercom integration for multi-unit properties.
Slide Motor Service
Slide gates are less common in Conway’s older neighborhoods but appear on some lakefront estates and newer infill properties where driveway slope makes a swing gate impractical. Slide motor repair runs $320-$550 depending on whether the issue is the motor, the track alignment, or both. Because slide motors work harder in humid conditions - rust on the track increases rolling resistance - we inspect the full track system, not just the motor box.
Battery Backup Installation
Conway’s summer power dips are frequent enough that a battery backup isn’t a luxury; it’s practical. We install battery backup systems compatible with LiftMaster, Ghost Controls, and DoorKing openers, keeping your gate operational through outages that would otherwise leave you manual-lifting a 300-pound wrought-iron gate in 95-degree humidity. Battery backup installation runs $180-$320, and we can add it to most existing systems in a single visit.
Intercom Integration
For Conway townhomes and multi-unit properties near Curry Ford Road and the Belle Isle corridor, we install and repair gate intercom systems that integrate with your motor controls. Wired and wireless options available. Intercom integration with existing motor systems typically runs $340-$580 depending on wiring runs and unit count.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Conway
We carry parts and factory training for nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Conway customers, this means we don’t order parts and make you wait. Our trucks stock the common failure items for Viking, Ghost Controls, and DoorKing units specifically - the three brands we see most often in 32812’s older installations. A DoorKing control board or Ghost Controls battery backup goes in same-day, not next week. That’s the difference between a gate specialist and a handyman who “also does gates.”
Common Gate Motor & Opener Problems We See in Conway Homes
- Lightning-fried control boards. Central Florida’s Lightning Alley delivers more strikes per square mile than nearly anywhere in North America. Every summer we replace surge protectors and control boards on lakefront homes where a single afternoon storm took out the entire automation system. A quality surge protector helps, but when it’s already happened, the fix is a board replacement and proper grounding.
- Rust-seized hinges and hardware. The 1960s-1980s ranch and split-level homes that define Conway’s housing stock often still have their original ornamental wrought-iron or tubular-steel gates. Forty to sixty years of Florida humidity has turned hinge pins and weld joints into frozen rust. The motor burns out trying to move a gate that hasn’t been properly maintained. We free the mechanical system first, then address the motor.
- Post heave and gate misalignment. The organic-rich, water-saturated fill soil along the Conway Chain of Lakes causes gate posts to cant 2-4 inches over time, a soil condition specific to lakeside parcels here and rarely seen just a mile west in Pine Castle’s drier subdivisions. A gate that doesn’t hang plumb overworks the motor, strips gears, and pops safety sensors. We re-plumb posts with fast-set concrete as standard practice on Conway calls.
- Premature spring and roller failure. Year-round humidity in 32812 accelerates oxidation on springs, rollers, and track hardware. Components that last a decade in Arizona need replacement in six to eight years here. We use corrosion-resistant hardware on replacements, and we grease what needs greasing during every service call.
Pricing for Gate Motor & Opener in Conway, FL
We’re straightforward about numbers because nobody likes a surprise on the invoice.
| Service | Typical Range in Conway |
|---|---|
| Diagnostic service call | $89-$120 |
| Control board replacement | $280-$450 |
| Motor repair (existing unit) | $180-$340 |
| Full motor replacement | $480-$650 |
| Linear motor repair | $220-$380 |
| Linear motor replacement | $580-$890 |
| Slide motor repair | $320-$550 |
| Battery backup installation | $180-$320 |
| Post re-plumbing with fast-set concrete | $200-$400 |
| Intercom integration | $340-$580 |
| Seasonal tune-up | $89 |
What moves the needle within these ranges: brand and age of the opener, whether the gate structure itself needs work (hinges, posts, welds), and whether we’re running new wiring after lightning damage. We settle on an exact price before we start. Estimates are free. Senior and veteran discounts apply - 5% off, always. Repairs over $250 qualify for $50 off.
We also offer a free second opinion on any written estimate you’ve received from another company. Bring it in. We’ll tell you straight if it’s fair or if something’s been added that doesn’t need to be there.
We Also Serve Cities Near Conway
Our service area extends throughout central Orange County. We regularly run calls to Conway neighbors in Orlando, Azalea Park, Belle Isle, and Pine Castle. The soil conditions change as you move west - Pine Castle’s drier ground doesn’t heave posts the way Conway’s lakefront fill does - but the lightning and humidity are constants across the whole corridor. Our Gate Motor & Opener team carries the same parts inventory and the same upfront pricing to every stop.
Serving Conway, FL - Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Conway
We see lightning-damaged gate openers most heavily from June through September, with a noticeable spike in calls 24-48 hours after major storm cells. Central Florida’s Lightning Alley, which includes all of 32812, records more lightning strikes per square mile than almost anywhere in North America. If your gate stops responding after a thunderstorm, the control board or surge protector is the most likely casualty. Call (833) 754-7503 - we stock replacement boards for nine major brands and can usually restore operation same-day.
Yes - standard concrete mix won’t set properly in Conway’s water-saturated lakeside soil, and a post that isn’t anchored correctly will cant again within a year or two. We use fast-set concrete formulated for high-moisture conditions, and we excavate to stable bearing depth below the organic fill layer. This is standard kit for our technicians on Conway calls. The re-plumbing typically adds $200-$400 to a motor service, and we include it in your upfront quote.
We can, but we won’t until the mechanical system is freed first. Installing a new motor on a gate with seized hinges burns out the motor within months. We regularly service the original ornamental gates from Conway’s 1960s-1980s housing stock. Our process: free the hinges, repair or replace rusted hardware, ensure the gate swings smoothly by hand, then size and install the correct motor. Done right - and backed in writing.
We are trained and equipped to service nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry the most common parts for Viking, Ghost Controls, and DoorKing on our trucks because these appear most frequently in Conway’s older installations. If we don’t have a specific part, we’ll tell you before we leave the driveway, not after. Call (833) 754-7503 to confirm availability for your model.
Yes - we install and repair intercom systems for multi-unit properties, including the townhome clusters near Curry Ford Road and similar developments throughout 32812. Wired and wireless options are available, and we integrate with your existing motor controls so visitors can buzz in without a separate system. Typical intercom integration runs $340-$580. We’ll assess your property layout and give you a firm quote before any work begins.
Ready to get your gate working right? Call Ironworks Gate Co. at (833) 754-7503 for a free estimate. A live person will answer, 24 hours a day, 7 days a week. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Conway and Central Florida since 1984.